相似文献/References:
[1]李新华,罗金恒,赵新伟,等.高钢级管线钢失效评估曲线研究[J].焊管,2007,30(4):33.[doi:1001－3938（2007）04－0033－03]
LI Xin-hua,LUO Jin-heng,ZHAO Xin-wei,et al.Research on Failure Assessment Curves of High Grade Pipeline Steel[J].,2007,30(6):33.[doi:1001－3938（2007）04－0033－03]
[2]宫少涛,王爱民,吉玲康,等.X80与X100级管线钢屈服强度Rt 0.5与Rp 0.2的差异性研究[J].焊管,2007,30(5):42.[doi:1001－3938（2007）05－0042－03]
GONG Shao-tao,WANG Ai-min,JI Ling-kang,et al.Study on Difference Between Yield Strength Rt 0.5 and Rp 0.2 for X80 and X100 Pipelines Steel[J].,2007,30(6):42.[doi:1001－3938（2007）05－0042－03]
[3]刘庆才,李 东,黎剑锋.影响输气管线钢管抗H2S性能主要因素的探讨[J].焊管,2007,30(5):54.[doi:1001－3938（2007）05－0054－05]
LIU Qing-cai,LI Dong,LI Jian-feng.Key Factors Affecting Sour Service Ability of Welded Pipe and Its Domestic Production[J].,2007,30(6):54.[doi:1001－3938（2007）05－0054－05]
[4]陶 鹏,张 弛,杨志刚,等.高钢级管线钢的组织和力学性能[J].焊管,2008,31(2):19.[doi:1001－3938（2008）02－0019－04]
TAO Peng,ZHANG Chi,YANG Zhi-gang,et al.The Microstructure and Mechanical Property of X70,X80 and X100 Grade Pipeline Steel[J].,2008,31(6):19.[doi:1001－3938（2008）02－0019－04]
[5]张 涵,王保华,朱 敏.K60级管线钢低温断裂韧性分析[J].焊管,2008,31(2):35.[doi:1001－3938（2008）02－0035－02]
ZHANG Han,WANG Bao-hua,ZHANG Jin-li.Analysis on Low-temperature Fracture Toughness of K60 Pipeline Steel[J].,2008,31(6):35.[doi:1001－3938（2008）02－0035－02]
[6]黄明浩,徐 烽,黄国建.影响管线钢屈强比的因素探讨[J].焊管,2008,31(3):20.[doi:1001－3938（2008）03－0020－04]
HUANG Ming-hao,XU Feng,HUANG Guo-jian.Discussion on Influencing Factors of Yield Ratio for Pipeline Steel[J].,2008,31(6):20.[doi:1001－3938（2008）03－0020－04]
[7]牛 辉,余大涛,高惠临.管线钢焊接热影响区的组织预测[J].焊管,2008,31(3):28.[doi:1001－3938（2008）03－0028－05]
NU Hui,YU Da-tao,GAO Hui-lin.Structure Forecast of Pipeline Steel Welding Heat Affected Zone[J].,2008,31(6):28.[doi:1001－3938（2008）03－0028－05]
[8]孔君华,郑 琳,关 云,等.西气东输二线工程用18.4 mm厚 X80级热轧板卷生产实践[J].焊管,2008,31(6):50.[doi:1001－3938（2008）06－0050－04]
KONG Jun-hua,ZHENG Ling,GUAN Yun,et al.Production Experience of X80 Grade Hot Rolled Coil with 18.4 mm Thickness Used〖JZ〗for the Second West to East Gas Pipeline Project[J].,2008,31(6):50.[doi:1001－3938（2008）06－0050－04]
[9]黄国建,张英慧,孔祥磊,等.特厚规格X70和X80级热轧卷板的开发与应用[J].焊管,2009,32(2):17.[doi:1001－3938（2009）02－0017-06]
HUANG Guo-jian,ZHANG Ying-hui,KONG Xiang-lei,et al.Development and Application of X70 & X80 Grade HRC with Heavy Thickness[J].,2009,32(6):17.[doi:1001－3938（2009）02－0017-06]
[10]杨专钊,李云龙,邓波,等.管线钢拉伸试验中异常屈服强度研究与分析[J].焊管,2009,32(4):51.[doi:1001－3938（2009）04－0051－03]
YANG Zhuan-zhao,LI Yun-long,DENG Bo,et al.Research and Analysis of Abnormal Yield Strength during Tensile Test of Pipeline Steel[J].,2009,32(6):51.[doi:1001－3938（2009）04－0051－03]
[11]刘振伟,田 鹏,王志太,等.连铸枝晶偏析对X80管线钢力学性能的影响[J].焊管,2014,37(6):31.[doi:１００１－３９３８（２０１4）05-0031-06]
LIU Zhenwei,TIAN Peng,WANG Zhitai,et al.Effect of Casting Dendritic Segregation on Mechanical Properties of X80 Pipeline Steel[J].,2014,37(6):31.[doi:１００１－３９３８（２０１4）05-0031-06]
[12]苏大雄,徐惟诚.试样厚度及落锤试验方式对X70 DWTT性能影响的研究[J].焊管,2018,41(7):21.[doi:10.19291/j.cnki.1001-3938.2018.07.004]
Su Daxiong,Xu Weicheng.Research on Influence of Specimen Thickness and Drop Weight Test Method on X70 Pipeline Steel DWTT Performance[J].,2018,41(6):21.[doi:10.19291/j.cnki.1001-3938.2018.07.004]