[1]杜红青.300mm×300mm×12mm方形钢管直接成方工艺研究[J].焊管,2008,31(1):53-56.[doi:1001-3938(2008)01-0053-04]
DU Hong-qing.Research on Directly Forming Process of Square Steel Pipe of 300mm×300mm×12mm[J].,2008,31(1):53-56.[doi:1001-3938(2008)01-0053-04]
点击复制
300mm×300mm×12mm方形钢管直接成方工艺研究
《焊管》[ISSN:1001-3938/CN:61-1160/TE]
- 卷:
-
31
- 期数:
-
2008年第1期
- 页码:
-
53-56
- 栏目:
-
工艺与设备
- 出版日期:
-
2008-01-28
文章信息/Info
- Title:
-
Research on Directly Forming Process of Square Steel Pipe of 300mm×300mm×12mm
- 文章编号:
-
1001-3938(2008)01-0053-04
- 作者:
-
杜红青
-
(攀钢集团眉山冷弯型钢有限责任公司)
- Author(s):
-
DU Hong-qing
-
-
- 关键词:
-
方形钢管; 孔型; 轧辊结构; V形角; 阻抗器
- Keywords:
-
square steel pipe; pass design; roller dtructure; V sharp angle; impedance
- 分类号:
-
TG332.22
- DOI:
-
1001-3938(2008)01-0053-04
- 文献标志码:
-
B
- 摘要:
-
通过对LW1250冷弯型钢机组直接成型300mm×300mm×12mm方形钢管工艺过程的研究,发现该工艺存在型钢表面划伤、焊缝断续、熔深不透、易黏连阻抗器等问题。针对存在的问题,改进和优化了孔型和轧辊结构设计,有效控制了焊接V形角;同时优化了阻抗器的设计,使其有效截面积缩小为钢管内截面积的 50%~60%,提高了方形钢管的产品质量,取得了较好的效果。
- Abstract:
-
Through research of production process of square steel pipe with 300mm×300mm×12mm produced by LW1250 cold bending profile unit under directly forming process,this process is found to have many questions such as existing of surface scratch,discontinuous weld seam,nonpenetration,and adhering impedance.Aiming at above existing questions, pass design and design of roller structure are optimized and improved which is effective to control welding V sharp angle,on the other hand,design of impedance is also optimized,and effective section area is reduced to 50%-60% of internal section area of steel pipe,which improve product quality of square steel pipe and obtain excellent effect.
参考文献/References:
[1]王先进.冷弯型钢生产及应用[M].北京:冶金工业出版社.1994: 262-263,329,345-390.
[2]小奈弘.高精度辊弯成型的实验与研究[D].北京:北方工业大学机电工程研究所,1996:11-20.
[3]李烨.大型冷弯方、矩形钢管的生产与研究[J].焊管,2003,26(6):28-31.
备注/Memo
- 备注/Memo:
-
杜红青(1953-),男,主任工程师,多年来主要从事焊管和冷弯型钢的产品开发与设计工作。
收稿日期:2007-06-08
更新日期/Last Update: