[1]李建一,田 鹏,孙志刚,等.X80级厚壁焊管生产中的气孔和夹渣原因分析[J].焊管,2009,32(2):56-57.[doi:1001-3938(2009)02-0056-02]
 LI Jian-yi,TIAN Peng,SUN Zhi-gang,et al.Gas Porosity and Inclusion Occur in Production of X80 Heavy Wall Thickness Pipe[J].,2009,32(2):56-57.[doi:1001-3938(2009)02-0056-02]
点击复制

X80级厚壁焊管生产中的气孔和夹渣原因分析
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
32
期数:
2009年第2期
页码:
56-57
栏目:
经验交流
出版日期:
2009-02-28

文章信息/Info

Title:
Gas Porosity and Inclusion Occur in Production of X80 Heavy Wall Thickness Pipe
文章编号:
1001-3938(2009)02-0056-02
作者:
李建一田 鹏孙志刚谷海龙王海生
(华油钢管有限公司,河北 青县 062658)
Author(s):
LI Jian-yiTIAN PengSUN Zhi-gangGU Hai-longWANG Hai-sheng
(Huabei Oil Steel Pipe Co.,Ltd.,Qingxian 062658,Hebei,China)
关键词:
X80 厚壁焊管西气东输二线工程气孔夹渣
Keywords:
X80 grade steel pipe with heavy thicknessthe Second West to East Gas Pipeline Projectgas porosityinclusion
分类号:
TG441.7
DOI:
1001-3938(2009)02-0056-02
文献标志码:
A
摘要:
根据西气东输二线用X80钢级、φ 1 219 mm×18.4 mm 螺旋埋弧焊管生产过程中产生一定量的气孔和夹渣缺陷,分别从成型稳定性、卷板质量、焊接规范、焊剂等方面对其形成原因进行了分析,并提出了一些应对措施。
Abstract:
A certain numbers of gas porosity and inclusion defects occur in production of X80 grade φ 1 219 mm×18.4 mm  SSAW pipe of the Second West to East Gas Pipeline Project.This article separately analyzed the causes from pipe forming stability,HRC quality,welding procedure,welding flux etc,and put forward some preventive measures.

参考文献/References:

[1]朱旭,吴金梅.浅谈螺旋埋弧焊管成型对焊接质量的影响[J].焊管,2001,24(6):51-53.
[2]毛浓召.螺旋埋弧焊焊管产生连续气孔、铁豆原因分析[J].焊管,2000,23 (6):41-43.

相似文献/References:

[1]村田正彦.日本新日铁X80级管线钢管研究概述[J].焊管,2008,31(2):40.[doi:1001-3938(2008)02-0040-04]
 Masahiko Murata.Pipe Study Summarization with Grade X80 Pipeline Steel by Nippon Co.Japan[J].,2008,31(2):40.[doi:1001-3938(2008)02-0040-04]
[2]余志峰,甄宏伟.对西气东输二线适于采用的焊接验收标准的建议[J].焊管,2008,31(4):77.[doi:1001-3938(2008)04-0077-04]
 YU Zhi-feng,ZHEN Hong-wei.Suggestion to Checking and Accepting Criteria Used in the Second West to East Gas Pipeline Project[J].,2008,31(2):77.[doi:1001-3938(2008)04-0077-04]
[3]唐子金,董军,张晓强,等.西气东输二线工程用X80级埋弧焊管的试制[J].焊管,2009,32(2):27.[doi:1001-3938(2009)02-0027-09]
 TANG Zi-jin,DONG Jun,ZHANG Xiao-qiang,et al.Trial Production X80 SSAW Pipe for the West to East Gas Pipeline Project[J].,2009,32(2):27.[doi:1001-3938(2009)02-0027-09]
[4]孙宏.西气东输二线用国产X80钢级螺旋埋弧焊管性能分析[J].焊管,2010,33(2):13.[doi:1001-3938(2010)02-0013-04]
 SUN Hong.Analysis on Domestic X80 Grade SAWH Pipe Property Used in the[J].,2010,33(2):13.[doi:1001-3938(2010)02-0013-04]

备注/Memo

备注/Memo:
作者简介:李建一(1983-),男,助理工程师,主要从事螺旋钢管焊接工作。
收稿日期:2008-11-14
更新日期/Last Update: