[1]许贵芝 编译.手弧焊规范对酸性介质中12X18H10T钢焊接接头腐蚀破坏的影响[J].焊管,2009,32(9):58-61.[doi:1001－3938（2009）09－0058－04]
　Edited and Translated by XU Gui-zhi.Corrosion Effect of Manual Arc Welding Specification on Welding Joint of 12X18H10T Steel Under the Condition of Acid Medium[J].,2009,32(9):58-61.[doi:1001－3938（2009）09－0058－04]
点击复制

手弧焊规范对酸性介质中12X18H10T钢焊接接头腐蚀破坏的影响
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
32
期数:
2009年第9期
页码:
58-61
栏目:
国外焊管
出版日期:
2009-09-28

文章信息/Info

Title:
Corrosion Effect of Manual Arc Welding Specification on Welding Joint of 12X18H10T Steel Under the Condition of Acid Medium
文章编号:
1001－3938（2009）09－0058－04
作者:
许贵芝  编译
（南京航空附件厂，南京 210002）
Author(s):
Edited and Translated by XU Gui-zhi
(Nanjing Aviation Accessories Factory,Nanjing 210002,China)
关键词:
12X18H10T不锈钢; 腐蚀破坏; 晶间腐蚀; 脉冲电流手弧焊; 细晶组织; 敏化作用
Keywords:
12X18H10T stainless steel; corrosion break; intergranular corrosion; pulse current manual arc welding; fine grain structure; sensitizing function
分类号:
TG407
DOI:
1001－3938（2009）09－0058－04
文献标志码:
A
摘要:
介绍了俄罗斯学者关于手弧焊不同规范对在酸性介质中工作的12X18H10T不锈钢焊接接头腐蚀破坏影响的研究概况。结果表明：酸性工作介质会促使耐蚀稳定性较好的12X18H10T不锈钢的焊接接头出现晶间腐蚀（MKK），腐蚀程度的大小受多种因素影响，其中焊缝组织晶粒尺寸越小腐蚀程度越轻；采用脉冲电流手弧焊比采用直流电流手弧焊的焊接接头组织晶粒小。因此，采用脉冲电流手弧焊可以提高不锈钢焊接接头的耐腐蚀稳定性。
Abstract:
This article introduced corrosion effect of manual arc welding specification on welding joint of 12X18H10T steel under the condition acid medium which was researched by Russia scholar.The result showed that acid working medium will boost welding joint of 12X18H10T stainless steel with good anticorrosion stability appearing intergranular corrosion,and corrosion degree is affected by many factors,and the more smaller of weld structure grain size,the less lighter of the corrosion degree;welding joint structure grain size is smaller by adopting pulse current manual arc welding compared with that of adopting direct current manual arc welding.Therefore,adopting pulse current manual arc welding can enhance anticorrosion stability of stainless steel welding joint.

备注/Memo

备注/Memo:
译者简介：许贵芝，男，高级工程师，长期从事俄文的翻译工作。
收稿日期：2009－02－17
译自Ю Н  САРАЕВ.Лияние Режимов Ручной Дуговой Сварки На Характер Коррозионного Разрушения В Кислых Средах Сварных Соединений Стали 12X18H10T.СВАРОЧНОЕ ПРОИЗВОДСТ-ВО.2008（4）：3-7.
更新日期/Last Update: