相似文献/References:
[1]胡德虎,赵 炜,牛 辉,等.螺旋埋弧焊管双丝高速焊工艺参数的优化[J].焊管,2007,30(4):69.[doi:1001－3938（2007）04－0069－03]
HU De-hu,ZHAO Wei,NIU Hui,et al.Process Parameters Optimization of High Speed Welding with Double Wires for Spiral Submerged Arc Welded Pipe[J].,2007,30(4):69.[doi:1001－3938（2007）04－0069－03]
[2]杨 志 孝.一种简单实用的螺旋埋弧焊管内焊清渣机[J].焊管,2007,30(5):63.[doi:1001－3938（2007）05－0063－03]
YANG Zhi-xiao.New & Practical Welding Slag Cleaning Unit for Inside Welding of Helical Submerged Arc Welding Pipe[J].,2007,30(4):63.[doi:1001－3938（2007）05－0063－03]
[3]毕宗岳,王海博,王高峰.螺旋埋弧焊管焊缝形貌优化研究[J].焊管,2008,31(2):14.[doi:1001－3938（2008）02－0014－05]
BI Zong-yue,WANG Hai-bo,WANG Gao-feng.Optimization Research on Weld Profile of Spiral Submerged Arc Welded Pipe[J].,2008,31(4):14.[doi:1001－3938（2008）02－0014－05]
[4]李必文,杨春雨,王树人,等.带钢边缘加工工艺的改进——双铣边替代剪边[J].焊管,2008,31(2):63.[doi:1001－3938（2008）02－0063－04]
LI Bi-wen,YANG Chun-yu,WANG Shu-ren,et al.Improvement of Machining Process for Strip Edges-replacing Edges Cutting with Double Milling[J].,2008,31(4):63.[doi:1001－3938（2008）02－0063－04]
[5]秦跃平.前摆式螺旋埋弧焊管机组内焊缝裂纹产生原因分析[J].焊管,2008,31(4):62.[doi:1001－3938（2008）04－0062－02]
QIN Yue-ping.Analysis on Reason of Inside Weld Crack of Front Swing SSAW Pipe Units[J].,2008,31(4):62.[doi:1001－3938（2008）04－0062－02]
[6]林春明,徐泽旋,朱文闯,等.螺旋埋弧焊管焊缝中链状气孔的判定[J].焊管,2008,31(4):69.[doi:1001－3938（2008）04－0069－03]
LIN Chun-ming,XU Ze-xuan,ZHU Wen-chuang,et al.Verification to Chain Porosity in Weld of SSAW Pipe[J].,2008,31(4):69.[doi:1001－3938（2008）04－0069－03]
[7]李为卫,王亚龙,李 洋,等.小批量试制X80级板卷及焊管的拉伸性能分析[J].焊管,2008,31(5):16.[doi:1001－3938（2008）05－0016－04]
LI Wei-wei,WANG Ya-long,LI Yang,et al.Analysis on Tensile Properties of Small Batch Trial-produced X80 Grade Steel Coil and Welded Pipe[J].,2008,31(4):16.[doi:1001－3938（2008）05－0016－04]
[8]宗 波,王树人,王铁民,等.国产X80级螺旋埋弧焊管的试制[J].焊管,2008,31(6):39.[doi:1001－3938（2008）06－0039〖KG－＊2〗－04]
ZONG Bo,WANG Shu-ren,WANG Tie-min,et al.Trial Production of X80 Grade Helically Submerged Arc Welded Pipe in China[J].,2008,31(4):39.[doi:1001－3938（2008）06－0039〖KG－＊2〗－04]
[9]陈小康,张毅.螺旋埋弧焊管生产过程卷板消耗定额编制方法及应用[J].焊管,2009,32(5):70.[doi:1001－3938（2009）05－0070－03]
CHEN Xiao-kang,ZHANG Yi.Formulate Steel Coil Consumption Quota Method During SSAW Pipe Production and Its Application[J].,2009,32(4):70.[doi:1001－3938（2009）05－0070－03]
[10]丁艳辉,李军,王继海.铣边机刀盘的精度检测[J].焊管,2009,32(6):57.[doi:1001－3938(2009)06－0057－02]
DING Yan-hui,LI Jun,WANG Ji-hai.Precision Measurement of Miller Cutting Disc[J].,2009,32(4):57.[doi:1001－3938(2009)06－0057－02]
[11]崔远洋,刘成坤.模块式铣边机刀盘的研制与应用[J].焊管,2011,34(10):33.[doi:1001-3938（2011）10-0033-04]
LIU Chen-kun,CUI Yuan-yang.Development and Application of Module Type Milling Machine Cutting Disc[J].,2011,34(4):33.[doi:1001-3938（2011）10-0033-04]