[1]朱剑明,陈戈.分类式方矩管组合模辊[J].焊管,2010,33(1):41-44.[doi:1001-3938(2010)01-0041-04]
 ZHU Jian-ming,CHEN Ge.Classified Rectangle Pipe Combination Mould Roller[J].,2010,33(1):41-44.[doi:1001-3938(2010)01-0041-04]
点击复制

分类式方矩管组合模辊
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
33
期数:
2010年第1期
页码:
41-44
栏目:
工艺与设备
出版日期:
2010-01-28

文章信息/Info

Title:
Classified Rectangle Pipe Combination Mould Roller
文章编号:
1001-3938(2010)01-0041-04
作者:
朱剑明1陈戈2
(1.无锡市精华冷弯型钢设备制造有限公司,江苏 无锡 214000;
2.江苏无锡法斯特管业有限公司,江苏 无锡 214000)
Author(s):
ZHU Jian-ming1CHEN Ge2
(1.Wuxi Jinghua Cold Forming Section Steel Equipment Manufacturing Co.,Ltd.,Wuxi 214000,Jiangsu,China;2.Wuxi Fasttube Steel Pipe Group,Wuxi 214000,Jiangsu,China)
关键词:
方矩管冷弯型钢分类式组合
Keywords:
rectangle pipecold forming section steelclassified combination
分类号:
TG335
DOI:
1001-3938(2010)01-0041-04
文献标志码:
B
摘要:
简要介绍了方矩管分类式组合成型的现实意义及推广价值。提出了组合模辊的设计思想,即合理的弯曲方式、模辊的科学组合、对模辊的功能化处理及方便简单地换辊操作等。通过将规范工艺与通用设备的有机结合,得出了科学的模辊组合方式。分类式组合模辊的实际使用,不仅缩短了停机换辊时间,减轻了劳动强度,而且提高了机组效益。如果对现有机组进行分类组合模辊的改造,也不需要太高的成本,因而分类组合模辊是一项值得推广的新技术。
Abstract:
This article briefly introduced the realistic meaning and promotion values of classified combination forming for rectangle pipe.It put forward the design thought for combination roller,which is reasonable bending,scientific combination,functionally dealing with mould roller and simple change-over the roller.Through formulated process and combining it with the conventional equipment,it obtained the scientific mould combination.Applied the classified combination mould roller in practice,it not only shortened the time of breaking down for changing over the roller,reduce the work force,but also enhance the efficiency of equipment units.If conduct modification to current equipment units,it will not need to put into much money.Therefore,the classified combination mould roller is a valuable newly technology which is worthy of making promotion.

参考文献/References:

[1]GB 6723—1986,通用冷弯开口型钢尺寸、外形、重量及允许偏差[S].

相似文献/References:

[1]艾正青,刘继英.复杂闭口截面冷弯型钢的成型及焊接工艺设计[J].焊管,2008,31(6):54.[doi:1001-3938(2008)05-0054-02]
 AI Zheng-qing,LIU Ji-ying.Forming and Welding Procedure Designs of Coldbend Forming with Complex Closed Section[J].,2008,31(1):54.[doi:1001-3938(2008)05-0054-02]
[2]马立东,刘才,邵涛,等.基于网络的冷弯型钢智能CAD系统研究与开发[J].焊管,2009,32(10):26.[doi:1001-3938(2009)10-0026-04]
 MA Li-dong,LIU Cai,SHAO Tao,et al.Research and Development of Intelligent CAD System of Cold Roll Forming Steel Based on Network[J].,2009,32(1):26.[doi:1001-3938(2009)10-0026-04]
[3]曹国富,卢启威.方矩管管壁增厚的原因分析[J].焊管,2010,33(7):55.[doi:1001-3938(2010)07-0055-05]
 CAO Guo-fu,LU Qi-wei.Discussion on Thickening Reason of Rectangular Pipe Wall Thickness[J].,2010,33(1):55.[doi:1001-3938(2010)07-0055-05]
[4]刘攀,刘荣佩,李远征.铁路用冷弯轨距挡板的孔型设计[J].焊管,2010,33(12):37.
[5]朱剑明,吕晟.方矩管直接成方成型原理及成型工艺[J].焊管,2011,34(7):38.
[6]李国昌,杨 仙.冷弯成型的智能化方法研究[J].焊管,2013,36(8):25.[doi:1001-3938(2013)08-0003-25]
 LI Guochang,YANG Xian.Research on Cold Roll Forming Intellectualization Methods[J].,2013,36(1):25.[doi:1001-3938(2013)08-0003-25]
[7]姜春民.P形截面冷弯型钢成型工艺研究[J].焊管,2015,38(10 ):48.[doi:1001-3938(2015)10-0049-04]
 JIANG Chunmin.Research on the Forming Technology of the P-shaped Cold Forming Sectional Steel[J].,2015,38(1):48.[doi:1001-3938(2015)10-0049-04]
[8]李 烨.冷弯成型生产中的轧辊消耗控制[J].焊管,2019,42(3):64.[doi:10.19291/j.cnki.1001-3938.2019.3.013]
 LI Ye.Control of Roll Consumption in Cold Roll Forming Production[J].,2019,42(1):64.[doi:10.19291/j.cnki.1001-3938.2019.3.013]

备注/Memo

备注/Memo:
作者简介:朱剑明(1953-),男,无锡市精华冷弯型钢设备制造有限公司总工程师,主要从事冷弯型钢设备的设计与制造。
收稿日期:2009-08-20
更新日期/Last Update: