[1]肖英杰,孙常全 编译.X100、X120管线钢的研发和生产[J].焊管,2010,33(5):67-71.[doi:1001－3938（2010）05－0067－05]
　Edited and translated by XIAO Ying-jie,SUN Chang-quan.Research & Development and Production of X100/X120 Pipeline Steel[J].,2010,33(5):67-71.[doi:1001－3938（2010）05－0067－05]
点击复制

X100、X120管线钢的研发和生产
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
33
期数:
2010年第5期
页码:
67-71
栏目:
国外焊管
出版日期:
2010-05-28

文章信息/Info

Title:
Research & Development and Production of X100/X120 Pipeline Steel
文章编号:
1001－3938（2010）05－0067－05
作者:
肖英杰; 孙常全 编译
（中油管道检测技术有限责任公司，河北 廊坊 065000）
Author(s):
Edited and translated by XIAO Ying-jie; SUN Chang-quan
(China Petroleum Pipeline Inspection Technology Co.,Ltd.,Langfang 065000,Hebei,China)
关键词:
X100管线钢; X120管线钢; 焊接材料; 轴向焊缝
Keywords:
X100 pipeline steel; X120 pipeline steel; welding material; axial weld
分类号:
TG142.1
DOI:
1001－3938（2010）05－0067－05
文献标志码:
A
摘要:
详细介绍了采用高强度管线钢进行天然气传输的经济效益以及高强度管线钢的研究现状，从高强度大直径管线钢的试验和生产实际出发，对材料性能及部分服役行为进行了描述。
Abstract:
This article detailedly introduced economic benefits of transmitting gas adopting pipeline steel with high strength,and research current status of pipeline steel with high strength.It introduced material performance and part service behavior from two aspects of pipeline steel with high strength and large diameter,such as test and practical production.

参考文献/References:

译自： SCHWINN V.Development and Production of Linepipe Steels in Grade X100 and X120［C］∥中国石油学会石油储运专业委员会.X100/X120级高性能管线钢国际高层论坛会论文集.北京：［出版者不详］，2005：120-136.

相似文献/References:

[1]郑中,赵迪,刘清友.螺旋焊管用X100热轧卷板的研制[J].焊管,2011,34(1):17.[doi:1001-3938（2011）01-0017-08]
　ZHENG Zhong,ZHAO Di,LIU Qing-you.Research on X100 Hot Rolled Coil Used for Helical Submerged Arc Welded (SAWH) Pipe[J].,2011,34(5):17.[doi:1001-3938（2011）01-0017-08]
[2]杜伟,娄琦,王长安,等.X120管线钢焊接试验及分析[J].焊管,2011,34(1):25.[doi:1001-3938（2011）01-0025-05]
[3]张　君,牛　辉.X100管线钢冷裂纹敏感性研究[J].焊管,2011,34(12):22.[doi:1001-3938（2011）12-0022-05]
　ZHANG Jun,NIU Hui.Study on Cold Cracking Sensitivity of X100 Grade Pipeline Steel[J].,2011,34(5):22.[doi:1001-3938（2011）12-0022-05]
[4]张 敏,陈飞绸,李继红.X100管线钢埋弧焊用烧结焊剂的研制[J].焊管,2012,35(6):9.[doi:１００１－３９３８（２０１２）０6-0009-04]
　ZHANG Min,CHEN Fei-chou,LI Ji-hong.Development of Sintered Flux Used for X100 Pipeline Steel Submerged-arc Welding[J].,2012,35(5):9.[doi:１００１－３９３８（２０１２）０6-0009-04]
[5]赵红波,牛 辉,付宏强,等.X100超高强度管线钢用埋弧焊烧结焊剂研制[J].焊管,2014,37(3):18.[doi:１００１－３９３８（２０１4）03-0019-04]
　ZHAO Hongbo,NIU Hui,FU Hongqiang,et al.Development of Submerged-arc Welding Sintered Flux Used for X100 Ultra High Strength Pipeline Steel[J].,2014,37(5):18.[doi:１００１－３９３８（２０１4）03-0019-04]
[6]赵红波,毕宗岳,李新宁,等.超高强度X100管线钢埋弧焊焊丝研制[J].焊管,2014,37(4):22.[doi:１００１－３９３８（２０１4）04-0022-04]
　ZHAO Hongbo,BI Zongyue,LI Xinning,et al.Development of SAW Welding Wire for Ultra-high Strength X100 Pipeline Steel[J].,2014,37(5):22.[doi:１００１－３９３８（２０１4）04-0022-04]
[7]毕宗岳,牛 辉,温宝京,等.超高强度X100管线钢埋弧焊焊丝研制[J].焊管,2014,37(5):16.[doi:１００１－３９３８（２０１4）05-0016-04]
　BI Zongyue,NIU Hui,WEN Baojing,et al.Development of SAW Welding Wire for Ultra-high Strength X100 Pipeline Steel[J].,2014,37(5):16.[doi:１００１－３９３８（２０１4）05-0016-04]
[8]张伟卫,王海涛,张继明,等.X100管线钢加工过程中组织变化的热模拟研究[J].焊管,2015,38(2):11.[doi:１００１－３９３８（２０１5）02-0011-05]
　ZHANG Weiwei,WANG Haitao,ZHANG Jiming,et al.Thermal Simulation Research on Microstructure Transformation in the Manufacturing Process of X100 Pipeline Steel[J].,2015,38(5):11.[doi:１００１－３９３８（２０１5）02-0011-05]
[9]马文军,李 琳,张 敏,等.填充金属对X100管线钢焊缝组织性能的影响[J].焊管,2015,38(5):18.[doi:１００１－３９３８（２０１5）05-0018-04]
　MA Wenjun,LI Lin,ZHANG Min,et al.Effect of Filler Metal on Weld Microstructure Properties of X100 Pipeline Steel[J].,2015,38(5):18.[doi:１００１－３９３８（２０１5）05-0018-04]
[10]常永乐,等.X100螺旋埋弧焊管反弯断裂失效分析[J].焊管,2016,39(6):53.[doi:10.19291/j.cnki.1001-3938.2016.06.012]
　CHANG Yongle,HUANG Xiaohui,et al.Analysis of Root Bend Fracture Failure for X100 SAWH Pipe[J].,2016,39(5):53.[doi:10.19291/j.cnki.1001-3938.2016.06.012]

备注/Memo

备注/Memo:
译者简介：肖英杰（1978-），女，2002年7月毕业于哈尔滨师范大学英语专业，在中油管道检测技术有限责任公司市场部从事国际市场营销工作。
收稿日期：2009-08-27
更新日期/Last Update: