[1]韩显柱,张善保,杨战利,等.螺旋埋弧焊管预焊焊接设备与工艺[J].焊管,2010,33(11):47-50.[doi:1001-3938（2010）11-0047-04]
点击复制

螺旋埋弧焊管预焊焊接设备与工艺
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
33
期数:
2010年第11期
页码:
47-50
栏目:
工艺与设备
出版日期:
2010-11-28

文章信息/Info

Title:
Welding Equipment and Technology of Helical Submerged-arc-Welding (SAWH) Pipe Tack-welding
文章编号:
1001-3938（2010）11-0047-04
作者:
韩显柱; 张善保; 杨战利; 胡德虎; 白德滨
关键词:
螺旋埋弧焊管; 预焊; 焊枪; 焊道; 冲击性能
分类号:
TG43
DOI:
1001-3938（2010）11-0047-04
文献标志码:
B
摘要:
介绍了螺旋埋弧焊管预精焊生产中预焊技术的特点及其焊接设备与焊接工艺。采用两台DC1000A进口电源、Ar+CO2+O2三元混合气体配比器、英国某公司开发的激光跟踪系统和哈尔滨焊接研究所研制的陶瓷复合喷嘴可自身旋转清渣的大电流MAG空冷焊枪，结合大电流高速MAG焊焊接工艺进行预焊，对预焊后的试样焊缝成形和金相组织进行了分析，并对精焊后试样的焊缝和热影响区进行了冲击性能分析，得到了预期的结果。
Abstract:
This paper introduced tack-welding characteristics of the two-stage SAWH pipe production process,as well aswelding equipments and welding technologies.The welding equipments include two sets of imported DC1000A power sources,Ar + CO2 + O2tri-mixed gas proportioner,laser tracking system developed by a British company,and the large current MAG air-cooling torch developed by Haerbin Welding Institute(HWI),which can be cleaned by itself through rotating the ceramic composite nozzle.The tack-welding was carried out by large current MAG welding process,the weld forming and metallographic structure of the samples after tack-welding were analyzed,and the impact properties of the weld and the HAZ after finishing welding were also analyzed,the expected results were obtained.

参考文献/References:

［1］陈庆勋.中国油气管道建设现状与发展趋势［R］.廊坊：中国国际管道合作与发展高层论坛会，2008.
［2］明茜.中国油气管道建设规划雏形：东西并进10年再建5万千米［N］.21世纪经济报道，2009-06-26(2).
［3］张楠.西气东输四线将源起塔里木或与川气缅气连网［N］.中国证券报.2009-06-26(3).
［4］李鹤林.中国焊管50年［M］.西安：陕西科学技术出版社，2008.

相似文献/References:

[1]胡德虎,赵　炜,牛　辉,等.螺旋埋弧焊管双丝高速焊工艺参数的优化[J].焊管,2007,30(4):69.[doi:1001－3938（2007）04－0069－03]
　HU De-hu,ZHAO Wei,NIU Hui,et al.Process Parameters Optimization of High Speed Welding with Double Wires for Spiral Submerged Arc Welded Pipe[J].,2007,30(11):69.[doi:1001－3938（2007）04－0069－03]
[2]杨 志 孝.一种简单实用的螺旋埋弧焊管内焊清渣机[J].焊管,2007,30(5):63.[doi:1001－3938（2007）05－0063－03]
　YANG Zhi-xiao.New & Practical Welding Slag Cleaning Unit for Inside Welding of Helical Submerged Arc Welding Pipe[J].,2007,30(11):63.[doi:1001－3938（2007）05－0063－03]
[3]毕宗岳,王海博,王高峰.螺旋埋弧焊管焊缝形貌优化研究[J].焊管,2008,31(2):14.[doi:1001－3938（2008）02－0014－05]
　BI Zong-yue,WANG Hai-bo,WANG Gao-feng.Optimization Research on Weld Profile of Spiral Submerged Arc Welded Pipe[J].,2008,31(11):14.[doi:1001－3938（2008）02－0014－05]
[4]李必文,杨春雨,王树人,等.带钢边缘加工工艺的改进——双铣边替代剪边[J].焊管,2008,31(2):63.[doi:1001－3938（2008）02－0063－04]
　LI Bi-wen,YANG Chun-yu,WANG Shu-ren,et al.Improvement of Machining Process for Strip Edges-replacing Edges Cutting with Double Milling[J].,2008,31(11):63.[doi:1001－3938（2008）02－0063－04]
[5]秦跃平.前摆式螺旋埋弧焊管机组内焊缝裂纹产生原因分析[J].焊管,2008,31(4):62.[doi:1001－3938（2008）04－0062－02]
　QIN Yue-ping.Analysis on Reason of Inside Weld Crack of Front Swing SSAW Pipe Units[J].,2008,31(11):62.[doi:1001－3938（2008）04－0062－02]
[6]林春明,徐泽旋,朱文闯,等.螺旋埋弧焊管焊缝中链状气孔的判定[J].焊管,2008,31(4):69.[doi:1001－3938（2008）04－0069－03]
　LIN Chun-ming,XU Ze-xuan,ZHU Wen-chuang,et al.Verification to Chain Porosity in Weld of SSAW Pipe[J].,2008,31(11):69.[doi:1001－3938（2008）04－0069－03]
[7]李为卫,王亚龙,李 洋,等.小批量试制X80级板卷及焊管的拉伸性能分析[J].焊管,2008,31(5):16.[doi:1001－3938（2008）05－0016－04]
　LI Wei-wei,WANG Ya-long,LI Yang,et al.Analysis on Tensile Properties of Small Batch Trial-produced X80 Grade Steel Coil and Welded Pipe[J].,2008,31(11):16.[doi:1001－3938（2008）05－0016－04]
[8]宗 波,王树人,王铁民,等.国产X80级螺旋埋弧焊管的试制[J].焊管,2008,31(6):39.[doi:1001－3938（2008）06－0039〖KG－＊2〗－04]
　ZONG Bo,WANG Shu-ren,WANG Tie-min,et al.Trial Production of X80 Grade Helically Submerged Arc Welded Pipe in China[J].,2008,31(11):39.[doi:1001－3938（2008）06－0039〖KG－＊2〗－04]
[9]陈小康,张毅.螺旋埋弧焊管生产过程卷板消耗定额编制方法及应用[J].焊管,2009,32(5):70.[doi:1001－3938（2009）05－0070－03]
　CHEN Xiao-kang,ZHANG Yi.Formulate Steel Coil Consumption Quota Method During SSAW Pipe Production and Its Application[J].,2009,32(11):70.[doi:1001－3938（2009）05－0070－03]
[10]孟德强,宁月,徐辉.螺旋埋弧焊管常见焊接裂纹的分析[J].焊管,2009,32(7):58.[doi:1001－3938（2009）07－0058－04]
　MENG De-qiang,NING Yue,XU Hui.Analysis on Common Welding Crack of SSAW Pipe[J].,2009,32(11):58.[doi:1001－3938（2009）07－0058－04]

更新日期/Last Update: