[1]郑中,赵迪,刘清友.螺旋焊管用X100热轧卷板的研制[J].焊管,2011,34(1):17-24.[doi:1001-3938（2011）01-0017-08]
　ZHENG Zhong,ZHAO Di,LIU Qing-you.Research on X100 Hot Rolled Coil Used for Helical Submerged Arc Welded (SAWH) Pipe[J].,2011,34(1):17-24.[doi:1001-3938（2011）01-0017-08]
点击复制

螺旋焊管用X100热轧卷板的研制
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
34
期数:
2011年第1期
页码:
17-24
栏目:
应用与开发
出版日期:
2011-01-28

文章信息/Info

Title:
Research on X100 Hot Rolled Coil Used for Helical Submerged Arc Welded (SAWH) Pipe
文章编号:
1001-3938（2011）01-0017-08
作者:
郑中1; 赵迪2; 刘清友3
(1.本溪钢铁(集团)公司热轧厂，辽宁本溪117000;
2.本溪钢铁(集团)公司技术中心，辽宁本溪117000;
3. 中国钢研科技集团公司，北京100081)
Author(s):
ZHENG Zhong1;  ZHAO Di2;  LIU Qing-you3
(1. Hot Rolled Plant,Benxi Iron & Steel (Group) Co.,Ltd.,Benxi 117000,Liaoning,China;
2. Technology Center,Benxi Iron & Steel (Group)Co.,Ltd.,Benxi 117000,Liaoning,China;
3. China Iron & Steel Research Institute Group,Beijing 100081,China)
关键词:
X100管线钢; 热轧卷板; 高韧性; 焊接性
Keywords:
X100pipeline steel; hot rolled coil; high toughness; weldability
分类号:
TG335.11
DOI:
1001-3938（2011）01-0017-08
文献标志码:
A
摘要:
高压长输管线运输效率的提高，使高强度、优良低温韧性的高级别石油管线钢在管线建设中越来越受到青睐。本溪钢铁(集团)公司（简称本钢）在2300机组热轧生产线上试验出15.3mm厚螺旋焊管用X100管线钢，其-20℃冲击功达到300J以上，制管结果显示：φ1219mm×15.3mm螺旋焊管用X100钢不仅抗疲劳韧性优良，而且焊接性能良好，各项指标均满足中国石油天然气集团公司X100管线钢标准要求。
Abstract:
With the increasing transportation efficiency of high pressure long-distance pipeline,high grade pipeline steel with high strength and excellent low temperature toughness is more and more favored.Benxi Iron & Steel (Group) Co.,Ltd (abbreviated as Benxi Steel) had produced X100 hot rolled coil for SAWH pipe with 15.3mm wall thickness on its 2300 unit production line,the impact energy reached over 300J under -20℃.The pipe manufacturing result showed that X100 hot rolled coil for 1219mm×15.3mm SAWH pipe not only possess excellent anti-fatigue toughness,but also with good weldability,which can meet X100 steel requirements of CNPC’s standard.

参考文献/References:

［1］付俊岩,尚成嘉,刘清友.中国高等级管线用钢的演技及其工业化实践［C］.第七届(2009)中国钢铁年会会议论文集.北京：中国金属学会,2009:89-92.
［2］HULKA K,BRODIGNON P,CRAY J M.Experience with Low Carbon HSLA Steel Containing 0.06-0.10 Percent Niobium［C］.International Seminar the HTP Steel Project. Araxá, Brazil:［s.n.］ , 2004.
［3］ GUO Jia, SHANG Chengjia.Weather Resistance of Low Carbon High Performance Bridge Steel［J］.Mterials and Design, 2009,30(1):129-133.
［4］ZUROB H S,ZHU G,SUBRAMANIAN S V,et al.Analysis of the Effect of Mn on the Recrystallization Kinetics of High Nb Steel:An Example of Physicallybased Alloy Design［J］. ISIJ International, 2005,45(5):713-716.
［5］EVENS G M. The Effect of Suphur and Phosphorus on Microstructure Properties of C-Mn Allweld Metal Deposites［J］.Metal Constructure,1986,18(9):631-636.
［6］KONG J H,Influence of Mo Content on Microstructure and Mechanical Properties of High Strength Pipeline Steel［J］.Materials and Design，2004(25)：723-728.

相似文献/References:

[1]肖英杰,孙常全 编译.X100、X120管线钢的研发和生产[J].焊管,2010,33(5):67.[doi:1001－3938（2010）05－0067－05]
　Edited and translated by XIAO Ying-jie,SUN Chang-quan.Research & Development and Production of X100/X120 Pipeline Steel[J].,2010,33(1):67.[doi:1001－3938（2010）05－0067－05]
[2]张　君,牛　辉.X100管线钢冷裂纹敏感性研究[J].焊管,2011,34(12):22.[doi:1001-3938（2011）12-0022-05]
　ZHANG Jun,NIU Hui.Study on Cold Cracking Sensitivity of X100 Grade Pipeline Steel[J].,2011,34(1):22.[doi:1001-3938（2011）12-0022-05]
[3]张 敏,陈飞绸,李继红.X100管线钢埋弧焊用烧结焊剂的研制[J].焊管,2012,35(6):9.[doi:１００１－３９３８（２０１２）０6-0009-04]
　ZHANG Min,CHEN Fei-chou,LI Ji-hong.Development of Sintered Flux Used for X100 Pipeline Steel Submerged-arc Welding[J].,2012,35(1):9.[doi:１００１－３９３８（２０１２）０6-0009-04]
[4]赵红波,牛 辉,付宏强,等.X100超高强度管线钢用埋弧焊烧结焊剂研制[J].焊管,2014,37(3):18.[doi:１００１－３９３８（２０１4）03-0019-04]
　ZHAO Hongbo,NIU Hui,FU Hongqiang,et al.Development of Submerged-arc Welding Sintered Flux Used for X100 Ultra High Strength Pipeline Steel[J].,2014,37(1):18.[doi:１００１－３９３８（２０１4）03-0019-04]
[5]赵红波,毕宗岳,李新宁,等.超高强度X100管线钢埋弧焊焊丝研制[J].焊管,2014,37(4):22.[doi:１００１－３９３８（２０１4）04-0022-04]
　ZHAO Hongbo,BI Zongyue,LI Xinning,et al.Development of SAW Welding Wire for Ultra-high Strength X100 Pipeline Steel[J].,2014,37(1):22.[doi:１００１－３９３８（２０１4）04-0022-04]
[6]毕宗岳,牛 辉,温宝京,等.超高强度X100管线钢埋弧焊焊丝研制[J].焊管,2014,37(5):16.[doi:１００１－３９３８（２０１4）05-0016-04]
　BI Zongyue,NIU Hui,WEN Baojing,et al.Development of SAW Welding Wire for Ultra-high Strength X100 Pipeline Steel[J].,2014,37(1):16.[doi:１００１－３９３８（２０１4）05-0016-04]
[7]张伟卫,王海涛,张继明,等.X100管线钢加工过程中组织变化的热模拟研究[J].焊管,2015,38(2):11.[doi:１００１－３９３８（２０１5）02-0011-05]
　ZHANG Weiwei,WANG Haitao,ZHANG Jiming,et al.Thermal Simulation Research on Microstructure Transformation in the Manufacturing Process of X100 Pipeline Steel[J].,2015,38(1):11.[doi:１００１－３９３８（２０１5）02-0011-05]
[8]马文军,李 琳,张 敏,等.填充金属对X100管线钢焊缝组织性能的影响[J].焊管,2015,38(5):18.[doi:１００１－３９３８（２０１5）05-0018-04]
　MA Wenjun,LI Lin,ZHANG Min,et al.Effect of Filler Metal on Weld Microstructure Properties of X100 Pipeline Steel[J].,2015,38(1):18.[doi:１００１－３９３８（２０１5）05-0018-04]
[9]常永乐,等.X100螺旋埋弧焊管反弯断裂失效分析[J].焊管,2016,39(6):53.[doi:10.19291/j.cnki.1001-3938.2016.06.012]
　CHANG Yongle,HUANG Xiaohui,et al.Analysis of Root Bend Fracture Failure for X100 SAWH Pipe[J].,2016,39(1):53.[doi:10.19291/j.cnki.1001-3938.2016.06.012]
[10]邓贺鑫.高强度X100管线钢自动焊接技术研究[J].焊管,2017,40(1):9.[doi:10.19291/j.cnki.1001-3938.2017.01.003]
　DENG Hexin.Research on Automatic Welding Technology of X100 Grade High Strength Pipeline Steel[J].,2017,40(1):9.[doi:10.19291/j.cnki.1001-3938.2017.01.003]

备注/Memo

备注/Memo:
作者简介：郑中（1973—），男，辽宁本溪钢铁(集团)公司热轧厂高级工程师，主要从事产品研发工作。
收稿日期：2010－07－21
更新日期/Last Update: