[1]杜伟,娄琦,李云龙,等.JCOE制管与防腐过程对抗大变形钢性能的影响[J].焊管,2011,34(6):20-24.[doi:1001-3938(2011)06-0020-05]
 DU Wei,LIANG Gen-xuan,LOU Qi,et al.The Effects of JCOE Manufacture and Coating Process on Properties of High Deformability Steel[J].,2011,34(6):20-24.[doi:1001-3938(2011)06-0020-05]
点击复制

JCOE制管与防腐过程对抗大变形钢性能的影响
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
34
期数:
2011年第6期
页码:
20-24
栏目:
试验与研究
出版日期:
2011-06-28

文章信息/Info

Title:
The Effects of JCOE Manufacture and Coating Process on Properties of High Deformability Steel
文章编号:
1001-3938(2011)06-0020-05
作者:
杜伟娄琦李云龙王长安杨专钊
1.中国石油集团石油管工程技术研究院,西安 710065;
2.北京隆盛泰科石油管科技有限公司,北京 100101;
3.宝鸡石油钢管有限责任公司,陕西 宝鸡 721008
Author(s):
DU Wei1 LIANG Gen-xuanLOU Qi LI Yun-long WANG Chang-an YANG Zhuan-zhao
1.CNPC Tubular Goods Research Institute, Xi’an 710065, China;
2.Beijing Longshine Oil Tubular Technology Co., Ltd., Beijing 100101, China;
3.Baoji Petroleum Steel Pipe Co., Ltd., Baoji 721008, Shaanxi, China
关键词:
抗大变形钢应变时效均匀延伸率形变强化指数(n)
Keywords:
high deformability steel strain aging uniform elongation strain hardening exponent(n)
分类号:
TG113.25
DOI:
1001-3938(2011)06-0020-05
文献标志码:
A
摘要:
比较了A,B和C 三种抗大变形钢板组织及性能,B和C组织中多边形铁素体含量更高,抗大变形能力较好。JCOE制管中三种钢板加工硬化明显,制管后屈服强度、屈强比显著上升,均匀延伸率、形变强化指数下降。通过热模拟方法研究了钢管防腐中应变时效作用。研究发现,应变时效程度与钢的组织有关,其中以针状铁素体为主的A试样应变时效更显著,时效后拉伸曲线中连续屈服行为不再明显。对比时效后钢管最终性能,C试样具有多边形铁素体与贝氏体层状交叠分布的双相组织,抗大变形能力最佳,屈强比(0.79)最低,均匀延伸率(7.5%)及形变强化指数(n=0.12)最高。
Abstract:
Microstructure and properties of three kinds of high deformability steel plate(A, B, C) are compared. In B and C structure the polygonal ferrite content was higher, and it possessed greater high deformation resistance. Due to strong hardening effect, the yield strength and Y/T ratio increased significantly after JCOE, uniform elongation and strain hardening exponent decreased. By thermal simulation method, the effect of strain aging in coating process was studied. The results showed that the degree of strain aging was in connection with structure, strain aging in A was more obvious, and the continuous yield behavior of A was not obvious after strain aging. Compared the final properties, it found that C possessed dual phase microstructure of polygonal ferrite and bainite layered overlapping distribution, its high deformation resistance ability was the best, Y/T ratio(0.79) was the lowest, uniform elongation(7.5%)and strain hardening exponent(n=0.12)were the highest.

参考文献/References:

[1] 李鹤林, 李霄, 吉玲康, 等. 油气管道基于应变的设计及抗大变形管线钢的开发与应用[J]. 焊管,2007, 30(5): 5-11.
[2] LIU B, LIU X J, ZHANG H. Strain-based Design Criteria of Pipelines[J]. Journal of Loss Prevention in the Process Industries, 2009(22): 884-888.
[3] GAO H, WANG M T, YU Z F. Strain-Based Design of X80 Gas Pipeline in Seismic Area in China[C]//Proceedings of the Sixteenth(2007) International Offshore and Polar Engineering Conference. Portugal: [s. n.], 2007: 3088-3092.
[4] 高建忠, 王春芳, 王长安, 等. 高钢级管线钢应变时效行为分析[J]. 材料开发与应用, 2009(6): 86-90.
[5] 刘栋池, 张晨鹏, 王晓香, 等. 内外涂层防腐工艺对高钢级管线钢管力学性能的影响[J]. 焊管, 2007, 30 (1): 38-40.
[6] 黎剑峰, 冯钊棠. 直缝焊管制管工艺对钢管横向拉伸性能影响探讨[J]. 焊管, 2006, 29(5): 25-29.
[7] 焦多田, 蔡庆伍, 武会宾, 等. 空冷弛豫对X70级抗大变形管线钢组织性能的影响[J].  材料热处理, 2009, 30(5): 101-105.
[8] TOYOHISA S, NOBUYUKI I, MITSUHIRO O, et al. Development of High Deformability Linepipe with Resistance to Strain-aged Hardening by Heat Treatment On-line Process[C]//Proceedings of the Sixteenth(2007) International Offshore and Polar Engineering Conference. Portugal:[s.n.], 2007: 2963-2968.

相似文献/References:

[1]牛冬梅,王茂堂,何 莹,等.大变形管线钢管应变时效硬化研究[J].焊管,2008,31(5):20.[doi:1001-3938(2008)05-0020-05]
 NIU Dong-mei,WANG Mao-tang,HE Ying,et al.Study on Strain Aging Hardening of Large Distortion Steel[J].,2008,31(6):20.[doi:1001-3938(2008)05-0020-05]
[2]王长安,高建忠,谢勇,等.试样制备过程对高钢级输送管管体拉伸性能的影响[J].焊管,2009,32(8):59.[doi:1001-3938(2009)08-0059-04]
 WANG Chang-an,GAO Jian-zhong,XIE Yong,et al.Influence of Specimen Preparation on Tensile Test of High Grade Line Pipe Body[J].,2009,32(6):59.[doi:1001-3938(2009)08-0059-04]
[3]孙宏,王晓香.X80级螺旋埋弧焊接钢管应变时效研究[J].焊管,2009,32(10):16.[doi:1001-3938(2009)10-0016-03]
 SUN Hong,WANG Xiao-xiang.Research on Strain Aging for X80 Grade HSAW Steel Pipe[J].,2009,32(6):16.[doi:1001-3938(2009)10-0016-03]
[4]闵祥玲,王晓香,万金涛,等.应变时效对高强度管线钢管的影响[J].焊管,2010,33(4):66.[doi:1001-3938(2010)04-0066-06]
 Edited and translated by MIN Xiang-ling,WANG Xiao-xiang,WAN Jin-tao,et al.Effect of Strain-aging on Line Pipe Steel with High Strength[J].,2010,33(6):66.[doi:1001-3938(2010)04-0066-06]
[5]刘振伟,郭 晖,尚成嘉.高Nb X80管线钢的应变时效研究[J].焊管,2011,34(5):12.
[6]马秋荣,张 腾,李 鹤,等.预变形及应变时效对X100管线钢管性能的影响[J].焊管,2012,35(8):13.[doi:1001-3938(2012)08-0013-06]
 MA Qiurong,ZHANG Teng,LI He,et al.Influence of Pre-deformation and Strain Aging on X100 Line Pipe Performance[J].,2012,35(6):13.[doi:1001-3938(2012)08-0013-06]
[7]孙 宏 编译.基于应变设计的UOE与螺旋焊管的评价[J].焊管,2012,35(8):68.[doi:1001-3938(2012)08-0068-08]
 Edited and Translated by SUN Hong.Evaluation of UOE and SAWH Pipe Based on Strain Design[J].,2012,35(6):68.[doi:1001-3938(2012)08-0068-08]
[8]赵 波,孙 奇,燕 铸,等.制管工艺及应变时效对X70抗大变形钢管性能的影响[J].焊管,2012,35(10):25.[doi:1001-3938(2012)10-025-07]
 ZHAO Bo,SUN Qi,YAN Zhu,et al.Effect of Pipe Manufacturing Process and Strain Aging on Properties of X70 Steel Pipe with High Deformation Resistance[J].,2012,35(6):25.[doi:1001-3938(2012)10-025-07]
[9]张伟卫,齐丽华,李 洋,等.X100管线钢应变时效行为研究[J].焊管,2013,36(2):14.[doi:1001-3938(2013)02-0014-05]
 ZHANG Weiwei,QI Lihua,LI Yang,et al.Research on Strain Aging Behavior of X100 Pipeline Steel[J].,2013,36(6):14.[doi:1001-3938(2013)02-0014-05]
[10]柏明卓,郑 磊,张 备,等.基于应变设计用X70大直径UOE管线管的研发[J].焊管,2015,38(1):21.[doi:1001-3938(2015)01-0021-07]
 BAI Mingzhuo,ZHENG Lei,ZHANG Bei,et al.Research and Development of X70 Large Diameter UOE Line Pipefor Strain-based Design Application[J].,2015,38(6):21.[doi:1001-3938(2015)01-0021-07]

备注/Memo

备注/Memo:
作者简介:杜伟(1982—), 男,毕业于北京科技大学,硕士研究生,主要从事石油管工程技术服务工作。
更新日期/Last Update: