[1]刘 任,张玉华.新型大直径厚壁钢管铣头倒棱机结构设计[J].焊管,2013,36(1):50-53.[doi:1001-3938(2013)01-0050-04]
 LIU Ren,ZHANG Yuhua.Structure Design of a New Type of Chamfering Machine for Large Diameter Thick Wall Steel Pipe[J].,2013,36(1):50-53.[doi:1001-3938(2013)01-0050-04]
点击复制

新型大直径厚壁钢管铣头倒棱机结构设计
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
36
期数:
2013年第1期
页码:
50-53
栏目:
工艺与设备
出版日期:
2013-01-28

文章信息/Info

Title:
Structure Design of a New Type of Chamfering Machine for Large Diameter Thick Wall Steel Pipe
文章编号:
1001-3938(2013)01-0050-04
作者:
刘 任张玉华
(天津理工大学 机械工程学院, 天津 300384)
Author(s):
LIU Ren ZHANG Yuhua
(School of Mechanical Engineering, Tianjin University of Technology, Tianjin 300384,China)
关键词:
关键词:结构设计铣头倒棱机 加工原理创新厚壁钢管加工
Keywords:
Key words: structure design milling head chamfering machine innovation of processing principle thick wall steel pipe processing
分类号:
TG544
DOI:
1001-3938(2013)01-0050-04
文献标志码:
B
摘要:
对现有的平头倒棱机设备及加工技术进行了分析,提出由于加工原理的限制导致设备加工能力不足,会出现刀具振动过大,切削稳定性差等问题。以此为参考将其加工原理改进为铣削加工,通过更换刀具以及增加过渡盘等方式,设计出具有创新结构的铣头倒棱机以提升对大直径厚壁钢管的加工能力。该设备使钢管在倒棱过程中的稳定性增强并扩大了加工范围,以此提升了钢管倒棱设备的加工能力和产品附加值,且对焊管和无缝钢管均适用,目前已在现场应用。
Abstract:
In this article, it analyzed the existing plain-end chamfering machine and processing technology , put forward some problems which caused by the limit of processing principle, such as insufficient processing capacity, excessive vibration for the cutter and unstable cutting. Based on the said information the processing principle was changed to milling, a kind of milling head chamfering machine was designed to improve processing capacity for large diameter thick wall steel pipe, by changing cutter and adding transition disc. This equipment enhances steel pipe stability, expands processing scope, and pormotes processing capacity of chamfering machine and added value of products. This new type of machine applies to both welded pipe and seamless steel pipe, and has been used on the spot at present.

参考文献/References:

[1] 苏红霞. 数控无缝钢管倒棱机的研究与开发[D]. 浙江:浙江大学, 2007.
[2] 刘邦义, 解吉辉, 孙丽丽, 等. 平头倒棱机技术特点及发展[J]. 重型机械, 2005(03):17-19.
[3] 顾智春. 全自动钢管平头倒棱机组的研究[D]. 辽宁:东北大学,2009.
[4] 张培庆. 钢管平头倒棱机的设计与制造[J]. 钢管, 1998(01):35-38.
[5] 北京正科科技有限公司. 角度铣头及其技术[J]. 现代制造, 2004(16):22-24.
[6] 陈宏钧. 金属切削技术基础手册[M]. 北京:机械工业出版社,2006.
[7] 李宗祥,陈东才.新型平头倒棱机的设计及应用[J].焊管,2002,25(06):59-60.

备注/Memo

备注/Memo:
—————————
作者简介:刘任(1986—),男,江苏徐州人,天津理工大学,研究生,研究方向为机械制造及自动化。
更新日期/Last Update: