[1]李周波,毕宗岳,张 峰,等.Q125钢级SEW石油套管的研发[J].焊管,2013,36(8):32-35.[doi:1001-3938(2013)08-0004-32]
 LI Zhoubo,BI Zongyue,ZHANG Feng,et al.Research and Development of Q125 Grade SEW Oil Casing[J].,2013,36(8):32-35.[doi:1001-3938(2013)08-0004-32]
点击复制

Q125钢级SEW石油套管的研发
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
36
期数:
2013年第8期
页码:
32-35
栏目:
应用与开发
出版日期:
2013-08-28

文章信息/Info

Title:
Research and Development of Q125 Grade SEW Oil Casing
文章编号:
1001-3938(2013)08-0004-32
作者:
李周波12毕宗岳12张 峰12芦 琳12何石磊12王 军12王 亮12李远征12
(1.国家石油天然气管材工程技术研究中心,陕西 宝鸡 721008;
2.宝鸡石油钢管有限责任公司,陕西 宝鸡 721008)
Author(s):
LI Zhoubo12 BI Zongyue12 ZHANG Feng12 LU Lin12 HE Shilei12WANG Jun12 WANG Liang12 LI Yuanzheng12
(1. Chinese National Engineering Research Center for Petroleum and Natural Gas Tubular Goods,
Baoji 721008, Shaanxi, China;2 Baoji Petroleum Steel Pipe Co., Ltd., Baoji 721008, Shaanxi, China)
关键词:
套管Q125HFW热张力减径调质处理力学性能
Keywords:
casingQ125high frequency welding(HFW)hot stretch-reducingquenching and temperingmechanical property
分类号:
TE931.2
DOI:
1001-3938(2013)08-0004-32
文献标志码:
A
摘要:
介绍了采用“高频电阻焊(HFW)+热张力减径+全管体调质热处理”工艺开发的Q125钢级SEW石油套管,并对所开发套管进行了常规力学性能检测。检测结果显示,Q125钢级SEW石油套管屈服强度达到945~955 MPa,抗拉强度大于995 MPa,母材及焊缝横向冲击韧性分别大于133 J和98 J。此外,HFW焊管经过热张力减径和全管调质处理后,焊缝区与母材的组织及性能基本一致。检测结果表明,“高频电阻焊+热张力减径+全管体调质热处理”组合新工艺可生产满足API SPEC 5CT标准的Q125钢级石油套管,套管具备优良的综合性能,完全能满足油田用户的需求。
Abstract:
A new Q125 grade SEW oil casing produced by HFW+hot stretch-reducing +quenched-tempered heat treatment for full pipe body process was introduced, and the conventional mechanical properties tests for the developed casing were carried out. The results showed that the yield strength of SEW Q125 reaches 945~955 MPa, tensile strength is over 995 MPa, the transverse impact toughness value of base metal and weld is higher than 133 J and 98 J. In addition, after hot stretch-reducing and quenched-tempered heat treatment for full pipe body, the microstructure and properties of HFW pipe weld and base metal are almost same . The results indicated that Q125 oil casing can be produced by adopting the above mentioned process, which can meet API SPEC 5CT standard. The oil casing possesses excellent comprehensive performance and can completely meet the requirements of oilfield users.

参考文献/References:

[1] 李亚欣,刘雅政,赵金锋,等.P110级石油套管淬火裂纹分析[J].金属热处理,2010,35(05):88-92.
[2] 李亚欣,刘雅政,赵金锋,等.P110级25MnV钢石油套管热处理工艺的优化[J].特种钢,2009,30(06):36-38.
[3] 张作贵,董晓明,田青超,等.N80 ERW套管调质前后焊缝组织演变的EBSD研究[J].电子显微学报,2010,29(01):759-764.
[4]  李亚欣,刘雅政,周乐育,等.石油套管淬火过程中残余应力场的数值模拟[J].北京科技大学学报,2010,32(11):1440-1445.
[5] 方剑,李阳华,谢凯意,等.P110套管探伤合格率偏低原因分析[J].金属热处理,2011,36(S1):154-156.
[6] 崔忠圻.金属学与热处理[M].第1版.北京:机械工业出版社,2004.
[7] 曹建春,雍岐龙,刘清友,等.含铌钼钢中微合金碳氮化物沉淀析出及其强化机制[J].材料热处理学报,2006,27(05):51-55.
[8] 蓝慧芳,杜林秀,李卓,等.工艺参数对高强度钢强度及韧性的影响[J].材料热处理学报,2009,30(01):61-65.
[9] 马爱清,郭兆成,贺景春. 30CrMnMo钢调质Q125钢级套管的工艺研究[J].包钢科技,2009,35(01):26-29.
[10] 马茂源,武会宾,王立东.调质型低碳Q125级ERW石油套管钢的组织与性能[J].金属热处理,2012,37(11):16-19.
[11] 崔国明,金富裕,赵建华.汽车后桥半轴套管淬火加热保温时间的合理确定[J].金属热处理,1990(02):22-26.
[12] 明道田.热处理淬火保温时间探讨[J].冶钢科技,1992(02):54-57.
[13] LIU Qingdong,PENG Jianchao,LIU Wenqing,et al.3D Atomprobe Characterizaion of Alloy Carbides in Tempering Martenite [J]. Acta Metalluragica Sinica,2009,45(11):1288-1296.
[14] API SPEC 5CT,套管和油管规范[S] .
[15] 王会珍,李云凯,李树奎,等. 83钢回火温度与力学性能的关系[J].材料热处理学报,2010,31(09):77-82.

相似文献/References:

[1]蔡晓闻,高连新.我国油套管特殊螺纹接头的发展现状[J].焊管,2008,31(4):41.
 CAI Xiao-wen,GAO Lian-xin.Current Development Situation of the Special Thread Connection for Tubing/Casing[J].,2008,31(8):41.
[2]法 炜,李瑞涛.套管月牙形磨损程度预测研究进展[J].焊管,2009,32(3):20.[doi:1001-3938(2009)03-0020-03]
 FA Wei,LI Rui-tao.The Study of Evolution Casing Wear Degree Predicting[J].,2009,32(8):20.[doi:1001-3938(2009)03-0020-03]
[3]王绪华.套管钻井技术发展与应用[J].焊管,2009,32(10):33.[doi:1001-3938(2009)10-0033-04]
 WANG Xu-hua.The Development and Application of Casing Drilling Technology[J].,2009,32(8):33.[doi:1001-3938(2009)10-0033-04]
[4]申昭熙,赵建新,历建爱,等.全尺寸外压挤毁试验“异常”结果分析[J].焊管,2010,33(11):62.[doi:1001-3938(2010)11-0062-03]
[5]靖立君,闫光龙,赵文轸,等.动态与静态腐蚀电化学噪声特征的对比[J].焊管,2011,34(8):9.
[6]肖国章,高 霞,管磊磊,等.某油井套管腐蚀原因分析[J].焊管,2011,34(8):43.
[7]白 鹤,何石磊,党 涛,等.我国油套管特殊螺纹接头研究现状分析[J].焊管,2011,34(11):30.[doi:1001-3938(2011)11-0030-05]
 BAI He,HE Shi-lei,DANG Tao,et al.The Analysis of Research Status on China Domestic Tubing and Casing Premium Connection[J].,2011,34(8):30.[doi:1001-3938(2011)11-0030-05]
[8]史宏德,田青超,丁维军.N80钢级HFW套管的研发[J].焊管,2012,35(3):24.[doi:1001-3938(2012)03-0024-05]
 SHI Hong-de,TIAN Qing-chao,DING Wei-jun.Development of N80 Grade HFW Casing[J].,2012,35(8):24.[doi:1001-3938(2012)03-0024-05]
[9]王少华,王 军,张 峰.BSG-80TT高抗挤套管的研制[J].焊管,2014,37(5):35.[doi:1001-3938(2014)05-0035-05]
 WANG Shaohua,WANG Jun,ZHANG Feng.R&D of BSG-80TT High Collapse-resistance Casing[J].,2014,37(8):35.[doi:1001-3938(2014)05-0035-05]
[10]郑 伟,白真权,赵雪会.不同温度下抗酸性套管用钢腐蚀行为研究[J].焊管,2014,37(6):22.[doi:1001-3938(2014)06-0022-04]
 ZHENG Wei,BAI Zhenquan,ZHAO Xuehui.Corrosion Behavior Research on Acid Resistance of Casing Steel at Different Temperature[J].,2014,37(8):22.[doi:1001-3938(2014)06-0022-04]

备注/Memo

备注/Memo:
作者简介:李周波(1981—),男,工程师,主要从事焊接技术及油井管新产品开发工作。
更新日期/Last Update: