[1]毕宗岳,牛 辉,温宝京,等.超高强度X100管线钢埋弧焊焊丝研制[J].焊管,2014,37(5):16-19.[doi:1001-3938(2014)05-0016-04]
 BI Zongyue,NIU Hui,WEN Baojing,et al.Development of SAW Welding Wire for Ultra-high Strength X100 Pipeline Steel[J].,2014,37(5):16-19.[doi:1001-3938(2014)05-0016-04]
点击复制

超高强度X100管线钢埋弧焊焊丝研制
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
37
期数:
2014年第5期
页码:
16-19
栏目:
试验与研究
出版日期:
2014-05-28

文章信息/Info

Title:
Development of SAW Welding Wire for Ultra-high Strength X100 Pipeline Steel
文章编号:
1001-3938(2014)05-0016-04
作者:
毕宗岳12牛 辉12温宝京12赵红波12徐红庄1刘刚伟1
(1. 宝鸡石油钢管有限责任公司,陕西 宝鸡 721008;
2. 国家石油天然气管材工程技术研究中心,陕西 宝鸡 721008)
Author(s):
BI Zongyue12 NIU Hui12 WEN Baojing12 ZHAO Hongbo12 XU Hongzhuang1 LIU Gangwei1
(1. Baoji Petroleum Steel Pipe Co.,Ltd.,Baoji 721008,Shaanxi,China;
2. Chinese National Engineering Research Center for Petroleum and Natural Gas Tubular Goods,Baoji 721008,Shaanxi,China)
关键词:
焊接X100管线钢埋弧焊焊丝
Keywords:
weldingX100 pipeline steelsubmerged arc weldingwelding wire
分类号:
TG407
DOI:
1001-3938(2014)05-0016-04
文献标志码:
A
摘要:
以Mn-Ni-Mo-Ti-B为主要合金系,研制出了一种能够适用于X100超高强度管线钢埋弧焊的焊丝。该焊丝与相应的BG-SJ101H2焊剂匹配,依据GB/T 12470—2003 《埋弧焊用低合金钢焊丝和焊剂》要求,经熔敷金属试验检测,屈服强度685 MPa,抗拉强度780 MPa,-40 ℃下冲击功均在27 J以上;通过X100钢管埋弧焊接后,焊缝外观形貌、工艺性能良好,力学性能优良,抗拉强度为780 MPa以上,-10 ℃下冲击功为100 J,实现了焊缝高强度和高韧性的良好匹配,能够满足X100埋弧钢管性能要求。
Abstract:
Adopting Mn-Ni-Mo-Ti-B as main alloy system, a kind of SAW welding wire was developed, which can be applied to X100 ultra high strength pipeline steel. This welding wire is compatible with the corresponding BG-SJ101H2 flux. According to the standard requirements of Low-alloy Steel Electrodes and Fluxed for Submerged Arc Welding GB/T 12470—2003, through test of deposited metal, the result showed that the yield strength is 685 MPa, the tensile strength is 780 MPa, and the impact energy value is more than 27 J under -40 ℃ After X100 steel pipe SAW welding, all the weld appearance, processing performance and mechanical properties are good, the tensile strength is more than 780 MPa, and the impact toughness is 100 J at -10 ℃. It realized good matching with high strength and high toughness, and can meet the requirements of X100 SAW pipe performance.

参考文献/References:

[1] 唐伯钢,尹士科,王玉荣.低碳钢与低合金高强度钢焊接材料[M].北京:机械工业出版社,1987.
[2] 张敏,姚成武,付翀,等.X80管线钢埋弧焊匹配焊丝研制[J].焊接学报,2006,27(04):64-68.
[3] 崔忠圻,刘北兴.金属学与热处理原理[M].哈尔滨:哈尔滨工业大学出版社,1998.
[4] 齐俊杰,黄运华,张跃.微合金化钢[M].北京:冶金工业出版社,2006.
[5] 陈伯蠡.高强钢埋弧焊缝的强韧化研究[J].焊接学报,1987(03):33-35.
[6] 张豪,魏金山,张京海.熔敷金属中筐篮编织状针状铁素体组织研究[J].材料开发与应用,2005(06):14-17.
[7] 马凤辉,李春范,王亚.中国焊接材料的生产与应用[J].焊接,2002(08):8-10.
[8] 赵明纯,单以银,肖福仁,等.管线钢中针状铁素体的形成及其强韧性的分析[J].材料科学与工艺,2001,9(04):356-158.
[9] 陈伯蠡,周运鸿.高强度埋弧焊焊缝强韧化研究[J].焊接学报,1987,8(03):153-161.
[10] 张炳范,李午申,曾悦坚.高韧性焊条的研究[J].焊接学报,1993,14(04):227-232.
[11] 林文彬,葛玉宏,吕世俊,等.X70直缝钢管4丝埋弧焊焊接工艺试验[J].焊接技术,2002(02):24-25.
[12] 李继红,杨亮,张敏.X100管线钢埋弧焊焊接接头的力学性能分析[J].热加工工艺,2013(11):171-172, 175.
[13] 薛小怀,钱百年,国旭明,等.高强高韧性管线钢埋弧用焊丝的研制[J].焊接学报,2002(05):30-34.
[14] 薛小怀.X80管线钢埋弧焊用焊丝、工艺及焊接性研究[J].材料导报,2002(08):53.
[15] 李亚江.微合金化钢[M].北京:冶金工业出版社,2010.

相似文献/References:

[1]赵春友.中直径直缝双面埋弧焊钢管[J].焊管,2007,30(5):59.[doi:1001-3938(2007)05-0059-02]
 ZHAO Chun-you.Longitudinal Double Submerged Arc Welded Pipe with Medium Diameter[J].,2007,30(5):59.[doi:1001-3938(2007)05-0059-02]
[2]郭瑞杰,付桂英,杨天冰,等.长输油气管道激光焊接技术[J].焊管,2007,30(6):78.[doi:1001-3938(2007)06-0078-03]
 GUO Rui-jie,FU Gui-ying.Laser Welding Technology of Long Distance Pipeline[J].,2007,30(5):78.[doi:1001-3938(2007)06-0078-03]
[3]毕宗岳,张锦刚.连续管焊丝的试验研究[J].焊管,2008,31(1):26.[doi:1001-3938(2008)01-0026-03]
 BI Zong-yue,ZHANG Jin-gang.Testing & Research of Welding Wire Used for Coil Tubing[J].,2008,31(5):26.[doi:1001-3938(2008)01-0026-03]
[4]韩志诚,王少刚,徐凤林,等.双相不锈钢的焊接研究进展[J].焊管,2008,31(3):5.[doi:1001-3938(2008)03-0005-04]
 HAN Zhi-cheng,WANG Shao-gang,XU Feng-lin,et al.Progress of Research on Welding of Duplex Stainless Steel[J].,2008,31(5):5.[doi:1001-3938(2008)03-0005-04]
[5]张盟军,刘换军,张 璐,等.林肯焊机并联技术的应用[J].焊管,2008,31(3):56.[doi:1001-3938(2008)03-0056-02]
 ZHANG Meng-jun,LIU Huan-jun,ZHANG Lu,et al.Parallel Connection Technology Application of Lincoln Welding Machine[J].,2008,31(5):56.[doi:1001-3938(2008)03-0056-02]
[6]周友龙,方永龙,袁卫东,等.T91/TP347H管接头焊接工艺试验研究[J].焊管,2008,31(4):17.[doi:1001-3938(2008)04-0017-04]
 ZHOU You-long,FANG Yong-long,YUAN Wei-dong,et al.Study on Welding Procedure Test of T91/TP347H Pipe Joint[J].,2008,31(5):17.[doi:1001-3938(2008)04-0017-04]
[7]冯 斌,刘 宇,刘方明.X70级管线钢焊接热裂纹模拟研究[J].焊管,2009,32(1):15.[doi:1001-3938(2009)01-0015-06]
 FENG Bin,LIU Yu,LIU Fang-min.Welding Thermal Crack Simulation Study on X70 Grade Pipeline Steel[J].,2009,32(5):15.[doi:1001-3938(2009)01-0015-06]
[8]徐 刚,王 旭,李树军,等.林肯交流焊机斯考特连接的研究[J].焊管,2009,32(3):52.[doi:1001-3938(2009)03-0052-02]
 XU Gang,WANG Xu,LI Shu-jun,et al.The Research of Lincoln AC Welding Machine Scott Connection[J].,2009,32(5):52.[doi:1001-3938(2009)03-0052-02]
[9]张祥,曾涛.基于ANSYS压力容器筒体与平板封头焊缝残余应力有限元分析[J].焊管,2009,32(5):22.[doi:1001-3938(2009)05-0022-03]
 ZHANG Xiang,ZENG Tao.The Finite Element Analysis on the Weld Residual Stress of the Pressure Vessel Cylinder and Plate Dome Based on ANSYS[J].,2009,32(5):22.[doi:1001-3938(2009)05-0022-03]
[10]尹长华,邹欣,李广民.“东西伯利亚—太平洋”管道工程项目中焊接相关认证介绍[J].焊管,2009,32(6):59.[doi:1001-3938(2009)06-0059-05]
 YIN Chang-hua,ZOU Xin,LI Guang-min.Regarding qualification and certificate Correlated with Welding[J].,2009,32(5):59.[doi:1001-3938(2009)06-0059-05]
[11]马文军,李 琳,张 敏,等.填充金属对X100管线钢焊缝组织性能的影响[J].焊管,2015,38(5):18.[doi:1001-3938(2015)05-0018-04]
 MA Wenjun,LI Lin,ZHANG Min,et al.Effect of Filler Metal on Weld Microstructure Properties of X100 Pipeline Steel[J].,2015,38(5):18.[doi:1001-3938(2015)05-0018-04]

备注/Memo

备注/Memo:
基金项目:国家科技支撑计划课题:超高强度油气输送管材关键技术研究(2011BAE35B01)。
收稿日期:2014-03-27
作者简介:毕宗岳(1962—),男,博士,高级工程师,主要从事油气管材开发及焊接技术研究工作。
更新日期/Last Update: