[1]李鸿斌,毕宗岳,余 晗,等.服役速度管柱性能分析[J].焊管,2015,38(3):52-56.[doi:1001-3938(2015)03-0052-05]
 LI Hongbin,BI Zongyue,YU Han,et al.Performance Analysis on Service Velocity String[J].,2015,38(3):52-56.[doi:1001-3938(2015)03-0052-05]
点击复制

服役速度管柱性能分析
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
38
期数:
2015年第3期
页码:
52-56
栏目:
经验交流
出版日期:
2015-03-28

文章信息/Info

Title:
Performance Analysis on Service Velocity String
文章编号:
1001-3938(2015)03-0052-05
作者:
李鸿斌12毕宗岳12余 晗12张晓峰12汪海涛12
1. 国家石油天然气管材工程技术研究中心,陕西 宝鸡 721008;
 2. 宝鸡石油钢管有限责任公司 钢管研究院,陕西 宝鸡 721008
Author(s):
LI Hongbin12BI Zongyue12YU Han12ZHANG Xiaofeng12WANG Haitao12
1. National Petroleum and Gas Tubular Goods Engineering Technology Research Center,Baoji 721008,Shaanxi,China;
2. Baoji Petroleum Steel Pipe Co., Ltd., Baoji 721008,Shaanxi,China
关键词:
焊管连续油管速度管柱服役疲劳性能腐蚀
Keywords:
welded pipecoiled tubing (CT) velocity string service fatigue performance corrosion
分类号:
TE931.2
DOI:
1001-3938(2015)03-0052-05
文献标志码:
B
摘要:
为更好了解气井内服役后速度管柱的性能,起出了某气井内服役3年的速度管柱,分别截取井口位置及井底位置管段,进行了外观、壁厚、金相和力学性能等检测。检测结果表明:该井况下的速度管柱经过3年服役后,管体为均匀腐蚀,焊缝性能无劣化,管样拉伸性能、压扁、扩口、静水压试验仍满足API SPEC 5ST标准要求,管样的疲劳性能也无明显降低。表明在该井况环境下国产速度管柱经过3年服役后,管体性能仍能满足继续服役的要求。
Abstract:
In order to better understand the velocity string performance in the gas well after service, the velocity string in a gas well served for 3 years was pulled out. It sampled from wellhead position and bottom location respectively to carry out performance tests, including appearance, wall thickness, metallographic, mechanical test, etc. The results showed that the velocity string after 3 year service, the pipe body was uniform corrosion, the weld properties were without deterioration. The tensile performance, flattening, expanding and hydrostatic test of sample pipe can still satisfy the requirements of API SPEC 5ST standard, and the fatigue performance did not decrease obviously. It indicated that under this well condition the velocity string after 3 years of service, the performance of pipe body can still meet the requirements of continuous service.

参考文献/References:

[1]罗鹏,秦跃平,陈锐,等. 体积压裂与速度管柱排液复合技术的应用[J]. 焊管,2012,35(01):29-32.
[2]赵彬彬,许学刚,白晓弘,等. 低成本速度管柱排水采气技术探讨[J]. 石油机械,2013,41(02):84-86.
[3]李相宏,陶小红,张友彩,等. 连续油管排水采气技术及其在广安002-H1-2井中的应用[J]. 天然气勘探与开发,2011,34(01):51-53.
[4]王海涛,李相方.气井CT速度管柱完井技术理论研究[J]. 石油钻采工艺,2009,31(03):41-45.
[5]钟晓瑜,颜光宗,黄艳,等. 连续油管深井排水采气技术[J]. 天然气工业,2005,25(01):111-113.
[6]卢秀德,刘钢,杨光炼. 50.8 mm连续油管作速度管串在天然气井的应用[J]. 油气井测试,2010,19(03):44-45.
[7]田伟,白晓弘,郭彬. 连续油管排水采气技术在苏里格气田的应用研究[J] . 化工技术与开发.2010,39(10):14-15.
[8] 黄艳,佘朝毅,马回运,等. 四川盆地气田排水采气工艺技术研究与应用[J]. 钻采工艺,2008,31(05):66-78.
[9] 赵彬彬,白晓弘,陈德见,等. 速度管柱排水采气效果评价及应用新领域[J]. 石油机械,2012,40(11):62-65.
[10]曹和平,张书平,白晓弘,等. 速度管柱系统研制与应用[J]. 石油机械,2011,39(10):113-115.
[11]曹彩云,刘毅,王小佳. 苏里格气田小直径油管排水采气试验及效果分析[J] . 石油化工应用.2011,30(06):31-35.
[12]解永刚,王雅萍,徐勇. 速度管柱排水采气技术在Z21- 22井的应用[J] . 石油化工应用,2013,32(06):100-102.
[13]赵宏波,王建平,王定峰. 速度管柱在长北山2气田的应用及效果分析[J]. 石油化工应用,2014,33(01):39-45.
[14]李相宏,陶小红,张友彩,等. 连续油管排水采气技术及其在广安002-H1-2井的应用[J]. 天然气勘探与开发,2011,34(01):51-53.
[15]王优强,张嗣伟,方爱国. 连续油管的失效形式与原因概述[J] . Oil Field Equipment,1999,28(04):15-18.
[16]彭建云,蒋俊,刘清友,等. 超深井生产测试用连续管的安全性评价[J]. 石油机械,2012,40(11):66-69.

相似文献/References:

[1]马海君.强力焊管的孔型设计[J].焊管,2007,30(4):56.[doi:1001-3938(2007)04-0056-02]
 MA Hai-jun.Pass Design of High-strength Welded Pipe[J].,2007,30(3):56.[doi:1001-3938(2007)04-0056-02]
[2]刘庆才,李 东,黎剑锋.影响输气管线钢管抗H2S性能主要因素的探讨[J].焊管,2007,30(5):54.[doi:1001-3938(2007)05-0054-05]
 LIU Qing-cai,LI Dong,LI Jian-feng.Key Factors Affecting Sour Service Ability of Welded Pipe and Its Domestic Production[J].,2007,30(3):54.[doi:1001-3938(2007)05-0054-05]
[3]彭在美.我国焊接钢管的发展进入重要的战略转折期[J].焊管,2008,31(6):5.[doi:1001-3938(2008)06-0005-10]
 PENG Zai-mei.The Development of China Welded Pipe Steps into the Important Strategic Transition Period[J].,2008,31(3):5.[doi:1001-3938(2008)06-0005-10]
[4]周建宏,石 凯,卢雪峰,等.国产CT80级连续油管用钢带对接焊焊接方法探讨[J].焊管,2009,32(5):25.[doi:1001-3938(2009)05-0025-03]
 ZHOU Jian-hong,SHI Kai,LU Xue-feng,et al.Discussion on Strip Butt-welding Method of CT80 Grade Coiled Tubing Made in China[J].,2009,32(3):25.[doi:1001-3938(2009)05-0025-03]
[5]李霄,熊庆人,石凯,等.焊管残余应力研究进展及展望[J].焊管,2009,32(7):12.[doi:1001-3938(2009)07-0012-06]
 LI Xiao,XIONG Qing-ren,SHI Kai,et al.Research Progress and Prospect of Residual Stress in Welded Pipe[J].,2009,32(3):12.[doi:1001-3938(2009)07-0012-06]
[6]马 露 涛.φ720mm焊管平头机夹管装置设计[J].焊管,2009,32(9):47.[doi:1001-3938(2009)09-0047-03]
 MA Lu-tao.Design for φ720mm Welded Pipe Beveling Machine Clamp Pipe Device[J].,2009,32(3):47.[doi:1001-3938(2009)09-0047-03]
[7]耿开博.铝管、不锈钢管的高频感应焊接[J].焊管,2009,32(11):29.[doi:1001-3938(2009)11-0029-03]
 GENG Kai-bo.High-frequency Induction Welding of Aluminum and Stainless Steel Pipes[J].,2009,32(3):29.[doi:1001-3938(2009)11-0029-03]
[8]陈志翔,Jean Paul Boillot,Jeff Noruk.数字激光视觉技术在焊管生产中的应用[J].焊管,2010,33(2):29.[doi:1001-3938(2010)02-0029-04]
 CHEN Zhi-xiang,Jean Paul Boillot,Jeff Noruk.Application of Digital Laser Vision Technology in Welded Pipe Production[J].,2010,33(3):29.[doi:1001-3938(2010)02-0029-04]
[9]黄克坚,苏章卓,甘遂谋,等.焊管机械扩径力的计算[J].焊管,2010,33(12):13.[doi:1001-3938(2010)12-0023-04]
[10]吴庆根.高频焊管生产中管体温度不均造成弯管的防止措施[J].焊管,2011,34(1):51.[doi:1001-3938(2011)01-0051-03]
[11]温庆伦,李 霄,姬二佳.连续油管对接焊残余应力场分析[J].焊管,2016,39(4):5.[doi:10.19291/j.cnki.1001-3938.2016.04.002]
 WEN Qinglun,LI Xiao,JI Erjia.Coiled Tubing Butt Welding Residual Stress Field Analysis[J].,2016,39(3):5.[doi:10.19291/j.cnki.1001-3938.2016.04.002]

备注/Memo

备注/Memo:
收稿日期:2014-09-03
基金项目:连续管制造检测技术及产业化研究(2011CZB-001)。
作者简介:李鸿斌(1984—),男,工程师,主要从事连续管新产品研发等工作。
更新日期/Last Update: