[1]张伟卫,王海涛,张继明,等.X100管线钢加工过程中组织变化的热模拟研究[J].焊管,2015,38(2):11-15.[doi:1001-3938(2015)02-0011-05]
 ZHANG Weiwei,WANG Haitao,ZHANG Jiming,et al.Thermal Simulation Research on Microstructure Transformation in the Manufacturing Process of X100 Pipeline Steel[J].,2015,38(2):11-15.[doi:1001-3938(2015)02-0011-05]
点击复制

X100管线钢加工过程中组织变化的热模拟研究
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
38
期数:
2015年第2期
页码:
11-15
栏目:
试验与研究
出版日期:
2015-02-28

文章信息/Info

Title:
Thermal Simulation Research on Microstructure Transformation
in the Manufacturing Process of X100 Pipeline Steel
文章编号:
1001-3938(2015)02-0011-05
作者:
张伟卫王海涛张继明李 鹤吉玲康熊庆人
(中国石油集团石油管工程技术研究院,西安 710065)
Author(s):
ZHANG WeiweiWANG HaitaoZHANG JimingLI HeJI LingkangXIONG Qingren
(CNPC Tubular Goods Research Institute,Xi’an 710065,China)
关键词:
热模拟弛豫X100管线钢显微组织
Keywords:
thermal simulation relaxation X100 pipeline steel microstructure
分类号:
TG113.12
DOI:
1001-3938(2015)02-0011-05
文献标志码:
A
摘要:
通过热模拟试验对X100管线钢在热加工过程中终轧温度和弛豫温度对显微组织的影响进行了研究,对不同终轧温度和弛豫温度作用下的组织转变规律和组织特征进行了深入分析。结果表明,通过调整终轧温度和弛豫温度可控制X100管线钢中多边形铁素体的含量,从而影响X100管线钢的力学性能。本研究可为开发具有优良变形能力的X100管线钢提供重要理论支持。
Abstract:
This paper studied the effect of finish rolling temperature and relaxation temperature on the microstructure of X100 pipeline steel through thermal simulation test, and the microstructure transformation rule and its essential characteristics under the action of different finish rolling temperature and the relaxation temperature were analyzed. The results showed that by controlling the finish rolling temperature and relaxation temperature could control polygon ferrite content in X100 pipeline steel, thus affect the mechanical properties of the X100 pipeline steel. The research can provide important theoretical support on the research and development X100 pipeline steel with excellent deformation ability.

参考文献/References:

[1]WIDGERY D,BLACKMAN S. Pipelines for stranded gad reserves: cutting the cost[C]//Proceedings of the 22nd world gas conference.Tokyo: [s.n], 2003:1-11.
[2]SHINOHARA Y,BESSON J,MADI Y. Effect of prestrain on ductility in high strength line pipe steels[C]∥Proceedings of the nineteenth international offshore and polar engineering conference. Osaka, Japan:[s.n.],2009: 146-153.
[3]吴海凤,郑磊. 预应变量和时效温度对X80管线钢性能的影响[J]. 材料热处理技术, 2009, 38(10):166-169.
[4]刘冰,刘学杰,张宏. 基于应变的管道设计准则[J]. 天然气工业,2008, 28(02):1-3.
[5]李龙,丁桦,温景林,等. 铁素体和贝氏体复相组织低碳钢的力学特性[J]. 材料研究学报, 2007, 21(05):517-522.
[6]张红梅,孙彬斌,贾志伟,等. 热轧双相钢显微组织和力学性能[J]. 材料热处理学报, 2007, 28(04): 78-82.[7]杨景红,刘清友,孙冬柏,等. 轧制工艺对微合金管 线钢组织及M/A岛的影响[J]. 北京科技大学学报,2009, 31(02):180-185.
[8]曾明, 江海涛, 胡水平, 等. 高钢级X100管线钢的组织与性能[J]. 材料科学与工程学报, 2011, 29(03):386-391.
[9]段琳娜, 刘清友, 贾书君, 等. X100级管线钢的组织和强韧性[J]. 材料研究学报, 2012, 26(04):443-448. [10]崔忠圻. 金属学与热处理[M]. 北京:机械工业出版社,2003:38-46.

相似文献/References:

[1]吕统全,王 勇,占焕校.X80管线钢焊接热影响区的二次脆化研究[J].焊管,2007,30(4):21.[doi:1001-3938(2007)04-0021-04]
 LU Tong-quan,WANG Yong,ZHAN Huan-xiao.Quadratic Short Study of Welding Heated Affect Zone on Grade X80 Pipeline Steel[J].,2007,30(2):21.[doi:1001-3938(2007)04-0021-04]
[2]周 雄,刘顺洪,段元威,等.t8/5对X70级管线钢热影响区粗晶区性能影响[J].焊管,2008,31(6):22.[doi:1001-3938(2008)06-0022-05]
 ZHOU Xiong,LIU Shun-hong,DUAN Yuan-wei,et al.Effect of t8/5 on the Coarse Grain Zone of HAZ Properties for X70 Pipeline Steel[J].,2008,31(2):22.[doi:1001-3938(2008)06-0022-05]
[3]冯 斌,刘 宇,刘方明.X70级管线钢焊接热裂纹模拟研究[J].焊管,2009,32(1):15.[doi:1001-3938(2009)01-0015-06]
 FENG Bin,LIU Yu,LIU Fang-min.Welding Thermal Crack Simulation Study on X70 Grade Pipeline Steel[J].,2009,32(2):15.[doi:1001-3938(2009)01-0015-06]
[4]张涵,葛玉宏.多丝埋弧焊热影响区冲击韧性分析[J].焊管,2009,32(11):46.[doi:1001-3938(2009)11-0046-05]
 ZHANG Han,GE Yu-hong.Aanlysis on Heat Affected Zone Impact Toughness of Multi-wire Submerged Arc Welding[J].,2009,32(2):46.[doi:1001-3938(2009)11-0046-05]
[5]冯斌,刘宇,刘方明,等.X80级管线钢热加工敏感性研究[J].焊管,2009,32(12):11.[doi:1001-3938(2009)12-0011-05]
 FENG Bin,LIU Yu,LIU Fang-ming,et al.Heat Processing Sensitivity Research on X80 Grade Pipeline Steel[J].,2009,32(2):11.[doi:1001-3938(2009)12-0011-05]
[6]陈延清,杜则裕,许良红,等.高Nb X70管线钢焊接连续冷却转变曲线分析[J].焊管,2010,33(7):21.[doi:1001-3938(2010)07-0021-03]
 CHEN an-qing,DU Ze-yu,XU Liang-hong,et al.Welding Continuous Cooling Transition Curve Of High Nb X70 Pipeline Steel[J].,2010,33(2):21.[doi:1001-3938(2010)07-0021-03]
[7]何小东,王月霞,吴 双,等.预热温度和冷却速度对X80大变形管线钢焊接粗晶区性能的影响[J].焊管,2012,35(10):10.[doi:1001-3938(2012)10-0010-06]
 HE Xiaodong,WANG Yuexia,WU Shuang,et al.Effect of Pre-heat Temperature and Cooling Rate on Properties in Coarse Grain Heat-affected Zone for X80 High Deformability Pipeline Steel[J].,2012,35(2):10.[doi:1001-3938(2012)10-0010-06]
[8]胡美娟,李炎华,吉玲康,等.X65MS酸性服役管线钢焊接性研究[J].焊管,2014,37(11):15.[doi:1001-3938(2014)11-0015-04]
 HU Meijuan,LI Yanhua,JI Lingkang,et al.Research on Weldability of X65MS Pipeline Steel for Sour Service[J].,2014,37(2):15.[doi:1001-3938(2014)11-0015-04]
[9]郭有田,陈中均,赵向东,等.X80钢级Φ1 219 mm 弯管局部加热热模拟工艺性能研究[J].焊管,2018,41(8):14.[doi:10.19291/j.cnki.1001-3938.2018.08.002]
 GUO Youtian,CHEN Zhongjun,ZHAO Xiangdong,et al.Process and Performance of Local Heating Thermal Simulation of X80 Grade Φ1 219 mm Elbow[J].,2018,41(2):14.[doi:10.19291/j.cnki.1001-3938.2018.08.002]
[10]黄鹏儒,王 雷,冯雪楠,等.焊接热循环对连续油管焊接HAZ组织的影响[J].焊管,2019,42(2):19.[doi:10.19291/j.cnki.1001-3938.2019.2.004]
 HUANG Pengru,WANG Lei,FENG Xuenan,et al.Effects on Microstructure of Heat-affected Zone in Coiled Tubing by Welding Thermal Cycle[J].,2019,42(2):19.[doi:10.19291/j.cnki.1001-3938.2019.2.004]

备注/Memo

备注/Memo:
收稿日期:2014-10-09
作者简介:张伟卫(1981—),男,硕士,主要从事石油天然气输送管道与管线钢材料的应用研究工作。
更新日期/Last Update: