[1]仝江涛.“直接成方”矩形管生产工艺及设备的研究[J].焊管,2017,40(8):53-57.[doi:10.19291/j.cnki.1001-3938.2017.08.011]
　TONG Jiangtao.Research on the Production Process and Equipment of “Direct Square” Rectangular Pipe[J].,2017,40(8):53-57.[doi:10.19291/j.cnki.1001-3938.2017.08.011]
点击复制

“直接成方”矩形管生产工艺及设备的研究()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
40
期数:
2017年第8期
页码:
53-57
栏目:
工艺与设备
出版日期:
2017-08-28

文章信息/Info

Title:
Research on the Production Process and Equipment of “Direct Square” Rectangular Pipe
文章编号:
10.19291/j.cnki.1001-3938.2017.08.011
作者:
仝江涛
 天水锻压机床（集团）有限公司， 甘肃 天水 741020
Author(s):
TONG Jiangtao
 Tianshui Metalforming Machine Tool(Group)Co., Ltd., Tianshui 741020, Gansu, China
关键词:
矩形管; 先圆后方; 直接成方; 成型
Keywords:
words: rectangular pipe;  first round then square;  direct square;  forming
分类号:
TG335.75
DOI:
10.19291/j.cnki.1001-3938.2017.08.011
文献标志码:
B
摘要:
为降低大直径矩形管的生产成本，满足建筑行业市场需求，对“直接成方”矩形管生产工艺流程和关键工序进行了研究。指出， “直接成方”成型过程中要保证成型角均大于90°，成型角的圆弧半径大于成品的圆弧半径，并且需要设计专用鹅颈上模；合缝（预焊）工序必须增加内撑辊装置；精整（轧制）工序上辊必须加工出焊缝余高通过槽，防止焊缝余高在精整过程中造成上板面塌陷。同时，对铣边机、成型机、合缝机、精整机、龙门移动矫直机等大直径矩形管主要生产设备的要求进行了阐述。对比研究表明，“直接成方”工艺较“先圆后方”工艺具有明显优势，能够节省设备、减少工序，从而降低生产成本。
Abstract:
In order to reduce the production cost of the large diameter rectangular pipe and meet the market demand of the construction industry, in the paper, it studied the production process and key process precautions of the "direct square" rectangular pipe. It pointed that should ensure the forming angle is greater than 90° during forming process, the arc radius of the forming angle is greater than that of the finished product, and it needs to design the special goose neck upper mould; the pre-welding process must increase the inner brace; during the finishing process, the upper roller must process the groove used for weld reinforcement through, preventing the weld reinforcement cause the surface collapse in the finishing process in finishing process. At the same time, the requirements for large diameter rectangular tube main production equipment were introduced, such as edge milling machine, forming machine, linking machine, finishing machine, Longmen mobile straightening machine etc. The comparison and research result showed that the “direct forming” process is with obvious advantages compared with the “first round then square” process, which can save the equipment and reduce the process, thus to reduce the production cost.

参考文献/References:

[1] 成大先. 机械设计手册[M]. 北京：化学工业出版社.
[2] JGT178—2005，建筑结构用冷弯矩形钢管[S].
[3] 朱龙根. 机械系统设计（第二版）[M]. 北京：机械工业出版社，2002.
[4] 汪恺. 机械设计标准应用手册（第二卷）[M]. 北京：机械工业出版社，1997.
[5] 中永胜. 机械原理教程[M]. 北京：清华出版社，1999.
[6] 哈尔滨工业大学理论力学教研组. 理论力学[M]. 北京：高等教育出版社，1997.
[7] 汪恺. 机械设计标准应用手册（第二卷）[M]. 北京：机械工业出版社，1997.
[8] 濮良贵，纪名刚. 机械设计[M]. 第7版. 北京：高等教育出版社，2001.
[9] 孙桓，陈作模. 机械原理[M]. 北京：高等教育出版社，2000.
[10] 刘鸿文. 材料力学[M]. 北京：高等教育出版社，1991.

相似文献/References:

[1]张文华,杨 仙,窦建民,等.斜轧不等圆角矩形管的计算机辅助孔型设计[J].焊管,2009,32(1):30.[doi:1001－3938（2009）01－0030－03]
　ZHANG Wen-hua,YANG Xian,DOU Jian-min,et al.Computer Aided Pass Design of Skew Rolling Rectangular Pipe with Unequal Fillet[J].,2009,32(8):30.[doi:1001－3938（2009）01－0030－03]
[2]刘 江,韩中奇,王叶松,等.高强钢辊弯成型矩形管特性数值分析[J].焊管,2019,42(4):20.[doi:10.19291/j.cnki.1001-3938.2019.4.004]
　LIU Jiang,HAN Zhongqi,WANG Yesong,et al.Numerical Analysis of the Characteristics of High Strength Steel Roll Forming Rectangular Tube[J].,2019,42(8):20.[doi:10.19291/j.cnki.1001-3938.2019.4.004]
[3]吕翠玉,於成业.矩形管仿形铣切锯恒定弧长切割算法[J].焊管,2021,44(2):66.[doi:10.19291/j.cnki.1001-3938.2021.02.014]
　LYU Cuiyu,YU Chengye.Constant Arc Length Cutting Algorithm of Profiling Milling Saw of Rectangular Pipe[J].,2021,44(8):66.[doi:10.19291/j.cnki.1001-3938.2021.02.014]

备注/Memo

备注/Memo:

收稿日期：2017－04－11

作者简介： 仝江涛（1975—）， 男，工程师， 主要从事设备维修、生产管理、销售等工作。

更新日期/Last Update: 2017-12-11