[1]王 斌,梁国萍,王小艳,等.焊接工艺对双金属复合管对接焊缝晶间腐蚀的影响[J].焊管,2018,41(6):47-50.[doi:10.19291/j.cnki.1001-3938.2018.06.011]
　WANG Bin,LIANG Guoping,WANG Xiaoyan,et al.Influence of Different Welding Processes on Intergranular Corrosion ofBimetal-lined Pipe Butt Weld[J].,2018,41(6):47-50.[doi:10.19291/j.cnki.1001-3938.2018.06.011]
点击复制

焊接工艺对双金属复合管对接焊缝晶间腐蚀的影响()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
41
期数:
2018年第6期
页码:
47-50
栏目:
工艺与设备
出版日期:
2018-06-28

文章信息/Info

Title:
Influence of Different Welding Processes on Intergranular Corrosion of
Bimetal-lined Pipe Butt Weld
文章编号:
10.19291/j.cnki.1001-3938.2018.06.011
作者:
王 斌; 梁国萍; 王小艳; 梁国栋; 王 剑; 田卫平; 王思恩
西安向阳航天材料股份有限公司，西安 710065
Author(s):
WANG Bin; LIANG Guoping; WANG Xiaoyan; LIANG Guodong;  WANG Jian; TIAN Weiping; WANG Sien
Xi’an Sunward Aeromat Co.，Ltd.，Xi’an 710065，China
关键词:
双金属复合管; 对接焊; 焊接工艺; 晶间腐蚀
Keywords:
bimetal-lined pipe; butt welding; welding process; intergranular corrosion
分类号:
TG44
DOI:
10.19291/j.cnki.1001-3938.2018.06.011
文献标志码:
B
摘要:
为了保证双金属复合管对接焊焊缝的耐腐蚀性能，结合双金属复合管对接焊的特点与特殊要求，从焊材的选取和焊接工艺参数的设计出发，验证了不同焊接工艺对复合管对接焊焊缝晶间腐蚀的影响。结果显示，实芯焊材正常焊接工艺下，焊缝的晶粒度与母材相当，没有出现腐蚀坑和晶间腐蚀弯曲开裂现象；药芯焊材及大热输入焊接工艺下，焊缝均出现不同程度的腐蚀。试验结果表明，双金属复合管在对接焊时最好选择与覆层材质相当的实芯耐蚀合金焊材，同时，要注意焊接热输入量的控制和内部惰性气体的保护。
Abstract:
In order to ensure the corrosion resistance of bimetal-lined pipe butt weld，combined with the characteristics and special requirements of bimetal-lined pipe butt welding，based on selection of welding material and design of welding parameter，the influences of different welding processes on intergranular corrosion of bimetal-lined pipe butt weld were verified. The results showed that grain size of solid wire under normal welding process was equivalent to the base metal’s without etch pit and intergranular corrosion bending and cracking；under flux-cored wire with great heat input welding process，the different degree of weld corrosion was occurred. The test results indicated that corrosion resistant alloy solid wire，which was similar to coating material，was the best choice for bimetal-lined pipe butt welding，and the control of welding heat input and internal inert gas protection should be paid attention.

参考文献/References:

[1] API SPEC 5LC，CRA Line Pipe[S].
[2] API SPEC 5LD，CRA Clad or Lined Steel Pipe[S].
[3] ASTM A262, Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels1[S].
[4] GB/T 13298—2015，金属显微组织检验方法[S].
[5] GB/T 6394—2017，金属平均晶粒度测定方法[S].
[6] ASTM E340—2002，Standard Test Method for Macroetching Metal and Alloys[S].
[7] 岳川川，姜洋，杨浩哲. 浅谈双金属复合管焊接质量控制[J]. 山东化工，2015，44（1）：108－109.
[8] 曾德智，杜清松，谷坛，等. 双金属复合管防腐技术研究进展[J]. 油气田地面工程，2008，27（12）：64－65.
[9] 钱乐中. 油气输送用耐腐蚀双金属复合管[J]. 特殊钢，2007，28（4）：42－44.
[10] 吕世雄，王廷，冯吉才. 20G/316L双金属复合管弧焊接头组织与性能[J]. 焊接学报，2009，30（4）：93－96.
[11] 李立英，王成，韩彬，等. L415/316L复合管免充氩焊接接头组织与性能[J]. 材料热处理学报，2014，35（1）：125－130.
[12] GB/T 16545—1996，金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除[S].

相似文献/References:

[1]尹长华,靳海成.大直径厚壁X70级钢管与绝缘接头基材P460NH管段的焊接[J].焊管,2007,30(4):36.[doi:1001－3938（2007）04－0036－05]
　YIN Chang-hua,JIN Hai-cheng.The Welding of Heavy-caliber Thick Wall X70 Steel Pipe and Insulated Rail Joint Parent Metal P460NH[J].,2007,30(6):36.[doi:1001－3938（2007）04－0036－05]
[2]左丽娜,张希川,刘忠仁,等.冰箱及空调用铜铝管焊接技术综述[J].焊管,2008,31(3):39.[doi:1001－3938（2008）03－0039－03]
　ZUO Li-na,ZHANG Xi-chuan,LIU Zhong-ren,et al.Welding Technology of Copper and Aluminum Pipe Used in Refrigerators and Air Conditions[J].,2008,31(6):39.[doi:1001－3938（2008）03－0039－03]
[3]张立君,张燕飞,郭崇晓.2205双相不锈钢双金属复合管焊接工艺研究[J].焊管,2009,32(4):30.[doi:1001－3938（2009）04－0030－05]
　ZHANG Li-jun,ZHANG Yan-fei,GUO Chong-xiao.Welding Procedure Research on 2205 Duplex Stainless Steel Bimetal Pipe[J].,2009,32(6):30.[doi:1001－3938（2009）04－0030－05]
[4]周建宏,石 凯,卢雪峰,等.国产CT80级连续油管用钢带对接焊焊接方法探讨[J].焊管,2009,32(5):25.[doi:1001－3938（2009）05－0025－03]
　ZHOU Jian-hong,SHI Kai,LU Xue-feng,et al.Discussion on Strip Butt-welding Method of CT80 Grade Coiled Tubing Made in China[J].,2009,32(6):25.[doi:1001－3938（2009）05－0025－03]
[5]李霄,石凯,刘彦明,等.连续管焊接工艺及接头性能研究[J].焊管,2012,35(5):15.[doi:１００１－３９３８（２０１２）０5-0015-04]
　LI Xiao,SHI Kai,LIU Yan-ming,et al.Research on Coiled Tubing Butt Welding Process and Properties of Welded Joint[J].,2012,35(6):15.[doi:１００１－３９３８（２０１２）０5-0015-04]
[6]谢 勇,曹 胜,杨专钊,等.内衬双金属复合管紧密度测量及影响因素[J].焊管,2014,37(3):23.[doi:１００１－３９３８（２０１4）03-0023-05]
　XIE Yong,CAO Sheng,YANG Zhuanzhao,et al.Tightness Measurement and Influencing Factors of Bimetal Composite Pipe with Lining[J].,2014,37(6):23.[doi:１００１－３９３８（２０１4）03-0023-05]
[7]李发根,孟繁印,郭 霖,等.双金属复合管焊接技术分析[J].焊管,2014,37(6):40.[doi:１００１－３９３８（２０１4）06-0040-04]
　LI Fagen,MENG Fanyin,GUO Lin,et al.Analysis of Welding Technology about Bimetal-lined Pipe[J].,2014,37(6):40.[doi:１００１－３９３８（２０１4）06-0040-04]
[8]王海涛,池 强,李鹤林,等.海底油气输送管道材料开发和应用现状[J].焊管,2014,37(8):25.[doi:１００１－３９３８（２０１4）08-0025-05]
　WANG Haitao,CHI Qiang,LI Helin,et al.Development and Application Status of Submarine Pipeline Materials for Oil and Gas Transportation[J].,2014,37(6):25.[doi:１００１－３９３８（２０１4）08-0025-05]
[9]卢卫卓,刘 迟,魏亚秋.海底管线用双金属复合管3LPP防腐质量控制[J].焊管,2014,37(12):68.[doi:１００１－３９３８（２０１4）12-0068-05]
　LU Weizhuo,LIU Chi,WEI Yaqiu,et al.3PP Corrosion Resistance Quality Control of Bimetal Composite Pipe Used for Submarine Pipeline[J].,2014,37(6):68.[doi:１００１－３９３８（２０１4）12-0068-05]
[10]王富铎,梁国栋,王 斌,等.海洋用CRA双金属复合管管端全自动堆焊工艺改进[J].焊管,2015,38(3):43.[doi:１００１－３９３８（２０１5）03-0043-05]
　WANG Fuduo,LIANG Guodong,WANG Bin,et al.Automatic Overlay Welding Procedure Improvement of the CRA Bimetal Lined Pipe Ends Used in Offshore[J].,2015,38(6):43.[doi:１００１－３９３８（２０１5）03-0043-05]

备注/Memo

备注/Memo:

收稿日期：2018－04－25

作者简介：王   斌（1986—），国际焊接工程师，主要从事双金属复合管的制造与焊接工作。

更新日期/Last Update: 2018-08-02