[1]郭有田,陈中均,赵向东,等.X80钢级Φ1 219 mm 弯管局部加热热模拟工艺性能研究[J].焊管,2018,41(8):14-18.[doi:10.19291/j.cnki.1001-3938.2018.08.002]
 GUO Youtian,CHEN Zhongjun,ZHAO Xiangdong,et al.Process and Performance of Local Heating Thermal Simulation of X80 Grade Φ1 219 mm Elbow[J].,2018,41(8):14-18.[doi:10.19291/j.cnki.1001-3938.2018.08.002]
点击复制

X80钢级Φ1 219 mm 弯管局部加热
热模拟工艺性能研究
()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
41
期数:
2018年第8期
页码:
14-18
栏目:
试验与研究
出版日期:
2018-08-28

文章信息/Info

Title:
Process and Performance of Local Heating Thermal Simulation of
X80 Grade Φ1 219 mm Elbow
文章编号:
10.19291/j.cnki.1001-3938.2018.08.002
作者:
郭有田陈中均赵向东段又天秦 涛周 鑫李晓亮
四川石油天然气建设工程有限责任公司容器制造厂, 成都 610000
Author(s):
GUO Youtian CHEN Zhongjun ZHAO Xiangdong DUAN Youtian QIN Tao ZHOU Xin LI Xiaoliang
Container Factory of Sichuan Oil and Gas Construction Engineering Co., Ltd., Chengdu 610000, China
关键词:
X80热煨弯管局部加热焊接接头热模拟性能
Keywords:
X80 hot-bending bends pipes local heating welded joints thermal simulation performance
分类号:
TG151.1
DOI:
10.19291/j.cnki.1001-3938.2018.08.002
文献标志码:
A
摘要:
为了研究X80钢级Φ1 219 mm×22 mm热煨弯管局部加热工艺的可行性,对X80母管管材进行了分析,采用不同加热工艺参数进行了母管直管段、过渡区和加热区热模拟试验,对比优选出了适合局部加热的工艺参数,确定了“加热温度为1 000 ℃,回火温度为520 ℃”的局部加热工艺参数,可满足CDP-S-OGP-PL-016—2014-3《油气管道工程用感应加热弯管技术规格书》的相应要求。
Abstract:
In order to study the feasibility of the local heating process of X80 grade Φ1 219 mm×22 mm high steel grade hot-bending bends pipes, the raw materials of X80 steel pipe were analyzed, and the mother pipe straight section, transition zone and heating zone were carried out with different heating process parameters. At the same time, the process parameters suitable for local heating were optimized, and the local heating process parameters of heating temperature 1 000 ℃ and tempering temperature 520 ℃ were determined, which could meet the corresponding requirements of CDP-S-OGP-PL-016—2014-3 Technical specification of induction bend for oil and gas pipeline.

参考文献/References:

[1] 辛希贤. 管线钢的焊接[M]. 西安: 陕西科学技术出版社, 1994.
[2] 高慧临. 管线钢组织、性能、焊接行为[M]. 西安: 陕西科学技术出版社, 1994.
[3] CDP-S-OGP-PL-016—2014-3, 油气管道工程用感应加热弯管技术规格书[S].
[4] GB/T 9711—2011, 石油天然气工业管线输送系统用钢管[S].
[5] GB/T 4336—2002, 碳素钢和中低合金钢火花源原子发射光谱分析方法(常规法)[S].
[6] ASTM A370—2014, 钢制品机械测试的标准试验方法和定义[S].
[7] 郭有田, 陈中均, 陈轩, 等. 全程加热与局部加热对X90高强钢热煨弯管组织及性能的影响[J]. 焊管, 2016, 39(6): 10-17.
[8] 刘迎来, 池强, 王鹏. 加热温度对X80弯管钢组织与性能的影响[J]. 金属热处理, 2010(10): 29-32.
[9] 王晓香, 李延丰, 付彦宏,等. X80级管线钢管和感应加热弯管的开发[J]. 焊管, 2009, 32(6): 30-35.
[10] 王卫国, 李彦民, 魏秦文,等. X80热煨弯管热处理工艺对组织及性能的影响[J]. 材料工程, 2012(10): 80-83.

相似文献/References:

[1]乔桂英,王 旭,付彦宏,等.加热温度和冷却速度对X80级弯管用钢组织与性能的影响[J].焊管,2008,31(6):15.[doi:1001-3938(2008)06-0015-04]
 QIAO Gui-ying,WANG Xu,FU Yan-hong,et al.Effects of Heat Temperature and Cooling Rate on Microstructure and Mechanical Properties of X80 Steel[J].,2008,31(8):15.[doi:1001-3938(2008)06-0015-04]
[2]孔君华,郑 琳,关 云,等.西气东输二线工程用18.4 mm厚 X80级热轧板卷生产实践[J].焊管,2008,31(6):50.[doi:1001-3938(2008)06-0050-04]
 KONG Jun-hua,ZHENG Ling,GUAN Yun,et al.Production Experience of X80 Grade Hot Rolled Coil with 18.4 mm Thickness Used〖JZ〗for the Second West to East Gas Pipeline Project[J].,2008,31(8):50.[doi:1001-3938(2008)06-0050-04]
[3]黄国建,张英慧,孔祥磊,等.特厚规格X70和X80级热轧卷板的开发与应用[J].焊管,2009,32(2):17.[doi:1001-3938(2009)02-0017-06]
 HUANG Guo-jian,ZHANG Ying-hui,KONG Xiang-lei,et al.Development and Application of X70 & X80 Grade HRC with Heavy Thickness[J].,2009,32(8):17.[doi:1001-3938(2009)02-0017-06]
[4]彭立山,付彦宏,赵志伟,等.X70级φ1016mm热煨弯管角度及曲率半径控制[J].焊管,2010,33(4):34.[doi:1001-3938(2010)04-0034-02]
 PENG Li-shan,FU Yan-hong,ZHAO Zhi-wei,et al.Angle and Radius of Curvature Control for X70 Grade φ1016mm Hot-bending Bend[J].,2010,33(8):34.[doi:1001-3938(2010)04-0034-02]
[5]孙 奇,赵 波 编译.高应变时效抗力X80管线钢显微组织和力学性能[J].焊管,2011,34(8):63.
[6]付彦宏,白雷杰,彭立山,等.X80级DN 1 200 mm大规格等径异径三通的研发[J].焊管,2011,34(9):30.
[7]赵志伟,高振宇,付彦宏,等.西气东输二线工程用X80级φ1 219 mm感应加热弯管的研发[J].焊管,2012,35(2):5.[doi:1001-3938(2012)02-0005-05]
 ZHAO Zhi-wei,GAO Zhen-yu,FU Yan-hong,et al.The Development of X80 Grade φ1 219 mm Hot Induction Bend Used to the 2nd West-east Gas Pipeline Project[J].,2012,35(8):5.[doi:1001-3938(2012)02-0005-05]
[8]田晨超,张骁勇,高惠临,等.工艺参数对X100热煨弯管组织和性能的影响[J].焊管,2012,35(4):15.[doi:1001-3938(2012)04-0015-05]
 TIAN Chen-chao,ZHANG Xiao-yong,GAO Hui-lin,et al.Effects of Process Parameters on Microstructure and Properties of X100 Hot-bending Bends[J].,2012,35(8):15.[doi:1001-3938(2012)04-0015-05]
[9]章传国,郑磊,张备,等.X80 大口径UOE焊管的开发和应用[J].焊管,2012,35(12):19.[doi:1001-3938(2012)12-0019-06]
 ZHENG Lei,ZHANG Chuanguo,ZHANG Bei,et al.Development and Application of X80 Large Diameter UOE Pipe[J].,2012,35(8):19.[doi:1001-3938(2012)12-0019-06]
[10]王泽恒,马国光,王艳华,等.基于BS 7910标准含埋藏裂纹缺陷X80长输管线的二级安全评定[J].焊管,2013,36(4):61.[doi:1001-3938(2013)04-0061-05]
 WANG Zeheng,MA Guoguang,WANG Yanhua,et al.Level 2 Safety Assessment for X80 Long-distance Transportation Pipeline with Embedded Crack Based on BS 7910 Standard[J].,2013,36(8):61.[doi:1001-3938(2013)04-0061-05]

备注/Memo

备注/Memo:

收稿日期:2018-04-27

作者简介:郭有田(1988—),男,工程师,现工作于四川石油天然气建设工程有限责任公司容器制造厂,主要从事压力容器和弯管生产、工艺、设备技术研究工作。

更新日期/Last Update: 2018-09-28