[1]刘宏博,王 洁,王 猛,等.铌对管线钢奥氏体分解的影响[J].焊管,2019,42(1):63-68.[doi:10.19291/j.cnki.1001-3938.2019.1.012]
　Edited and translated by LIU Hongbo,WANG Jie,WANG Meng,et al.The Effect of Niobium on Austenite Decomposition in Line Pipe Steels[J].,2019,42(1):63-68.[doi:10.19291/j.cnki.1001-3938.2019.1.012]
点击复制

铌对管线钢奥氏体分解的影响()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
42
期数:
2019年第1期
页码:
63-68
栏目:
国外焊管
出版日期:
2019-01-28

文章信息/Info

Title:
The Effect of Niobium on Austenite Decomposition in Line Pipe Steels
文章编号:
10.19291/j.cnki.1001-3938.2019.1.012
作者:
刘宏博1; 王 洁1; 王 猛1; 刘福海2 编译
1. 渤海石油装备福建钢管有限公司，福州 350512；
2. 哈尔滨焊接研究院有限公司，哈尔滨 150028
Author(s):
Edited and translated by LIU Hongbo1;  WANG Jie1;  WANG Meng1;  LIU Fuhai2
1. North China Petroleum Fujian Steel Pipe Co., Ltd., Fuzhou 350512, China；
2. Harbin Welding Institute Limited Company, Harbin 150028, China
关键词:
管线钢; 铌; 奥氏体分解; 晶粒尺寸; 冷却速率
Keywords:
pipeline steel;  niobium;  austenite decomposition;  grain size;  cooling rate
分类号:
TG142.1
DOI:
10.19291/j.cnki.1001-3938.2019.1.012
文献标志码:
A
摘要:
为了研究铌对管线钢奥氏体分解的影响规律，采用激光超声波技术对低Nb钢和高Nb钢的原始晶粒生长行为进行测量，并对不同冷却速率、钢中不同Nb状态（固溶或析出）和不同奥氏体晶粒尺寸下的试样进行了光学金相和显微硬度检测，研究了在连续冷却过程中奥氏体晶粒尺寸、冷却速率和Nb状态的函数关系。结果表明，Nb的溶解对奥氏体分解有很强的影响，其抑制了贝氏显微组织细化的转变温度，增加了HAZ粗晶区的硬度，特别是在大奥氏体晶粒尺寸及钢中Nb含量较高的情况下，其影响效果更加明显。
Abstract:
In order to study the influence of niobium on the austenite decomposition of pipeline steel，the laser ultrasonic technique was used to measure the original grain growth behavior of two steels with a low and high Nb content. The metallographic microhardness tests were carried out on samples with different cooling rates，different Nb states（solid solution or precipitation）and different austenite grain sizes. At the same time，the functional relationship between austenite grain size，cooling rate and Nb state during continuous cooling was also studied. The results show that the dissolution of Nb has a great influence on the austenite decomposition，which inhibits the transformation temperature of bainite microstructure refinement and increases the hardness of the HAZ coarse grain region，especially when the austenite grains are coarse and Nb in steel. When the content is high，the effect is more obvious.

相似文献/References:

[1]李新华,罗金恒,赵新伟,等.高钢级管线钢失效评估曲线研究[J].焊管,2007,30(4):33.[doi:1001－3938（2007）04－0033－03]
　LI Xin-hua,LUO Jin-heng,ZHAO Xin-wei,et al.Research on Failure Assessment Curves of High Grade Pipeline Steel[J].,2007,30(1):33.[doi:1001－3938（2007）04－0033－03]
[2]宫少涛,王爱民,吉玲康,等.X80与X100级管线钢屈服强度Rt 0.5与Rp 0.2的差异性研究[J].焊管,2007,30(5):42.[doi:1001－3938（2007）05－0042－03]
　GONG Shao-tao,WANG Ai-min,JI Ling-kang,et al.Study on Difference Between Yield Strength Rt 0.5 and Rp 0.2 for X80 and X100 Pipelines Steel[J].,2007,30(1):42.[doi:1001－3938（2007）05－0042－03]
[3]刘庆才,李 东,黎剑锋.影响输气管线钢管抗H2S性能主要因素的探讨[J].焊管,2007,30(5):54.[doi:1001－3938（2007）05－0054－05]
　LIU Qing-cai,LI Dong,LI Jian-feng.Key Factors Affecting Sour Service Ability of Welded Pipe and Its Domestic Production[J].,2007,30(1):54.[doi:1001－3938（2007）05－0054－05]
[4]王树人,崔志新.管线钢落锤撕裂试验异常脆性断口分析[J].焊管,2007,30(6):69.[doi:1001－3938（2007）06－0069－03]
　WANG Shu-ren? CUI Zhi-xin.Analysis on Abnormal Brittle Fracture of DWTT for Pipeline Steel[J].,2007,30(1):69.[doi:1001－3938（2007）06－0069－03]
[5]陶 鹏,张 弛,杨志刚,等.高钢级管线钢的组织和力学性能[J].焊管,2008,31(2):19.[doi:1001－3938（2008）02－0019－04]
　TAO Peng,ZHANG Chi,YANG Zhi-gang,et al.The Microstructure and Mechanical Property of X70,X80 and X100 Grade Pipeline Steel[J].,2008,31(1):19.[doi:1001－3938（2008）02－0019－04]
[6]黄明浩,徐 烽,黄国建.影响管线钢屈强比的因素探讨[J].焊管,2008,31(3):20.[doi:1001－3938（2008）03－0020－04]
　HUANG Ming-hao,XU Feng,HUANG Guo-jian.Discussion on Influencing Factors of Yield Ratio for Pipeline Steel[J].,2008,31(1):20.[doi:1001－3938（2008）03－0020－04]
[7]牛 辉,余大涛,高惠临.管线钢焊接热影响区的组织预测[J].焊管,2008,31(3):28.[doi:1001－3938（2008）03－0028－05]
　NU Hui,YU Da-tao,GAO Hui-lin.Structure Forecast of Pipeline Steel Welding Heat Affected Zone[J].,2008,31(1):28.[doi:1001－3938（2008）03－0028－05]
[8]孔君华,郑 琳,关 云,等.西气东输二线工程用18.4 mm厚 X80级热轧板卷生产实践[J].焊管,2008,31(6):50.[doi:1001－3938（2008）06－0050－04]
　KONG Jun-hua,ZHENG Ling,GUAN Yun,et al.Production Experience of X80 Grade Hot Rolled Coil with 18.4 mm Thickness Used〖JZ〗for the Second West to East Gas Pipeline Project[J].,2008,31(1):50.[doi:1001－3938（2008）06－0050－04]
[9]黄国建,张英慧,孔祥磊,等.特厚规格X70和X80级热轧卷板的开发与应用[J].焊管,2009,32(2):17.[doi:1001－3938（2009）02－0017-06]
　HUANG Guo-jian,ZHANG Ying-hui,KONG Xiang-lei,et al.Development and Application of X70 & X80 Grade HRC with Heavy Thickness[J].,2009,32(1):17.[doi:1001－3938（2009）02－0017-06]
[10]杨专钊,李云龙,邓波,等.管线钢拉伸试验中异常屈服强度研究与分析[J].焊管,2009,32(4):51.[doi:1001－3938（2009）04－0051－03]
　YANG Zhuan-zhao,LI Yun-long,DENG Bo,et al.Research and Analysis of Abnormal Yield Strength during Tensile Test of Pipeline Steel[J].,2009,32(1):51.[doi:1001－3938（2009）04－0051－03]

备注/Memo

备注/Memo:

收稿日期：2018-11-20

译者简介：刘宏博（1987—），男，焊接工程师，主要从事油气输送用、大直径低压流体输送用螺旋缝埋弧焊焊管的焊接工艺技术研究工作。

更新日期/Last Update: 2019-02-15