参考文献/References:
[1] 练章华, 于浩, 刘永辉, 等. 大斜度井中套管磨损机理研究[J]. 西南石油大学学报(自然科学版), 2016,38(2):176-182.
[2] 梁尔国, 李子丰, 王长进, 等. 深井和大位移井套管磨损程度预测[J]. 石油钻探技术, 2013, 41(2): 65-69.
[3] 黄洪春, 沈忠厚, 高德利. 三高气田套管磨损研究及应用分析[J]. 石油机械, 2015, 43(4): 28-33.
[4] YU Hao, LIAN Zhanghua, LIN Tiejun, et al. Experimental and numerical study on casing wear in a directional well under in situ stress for oil and gas drilling [J]. Journal of Natural Gas Science and Engineering, 2016(35): 986-996.
[5] TAN Leichuan, GAO Deli, ZHOU Jinhui. Casing wear prediction with considering initial internal casing eccentricity[J]. Arabian Journal for Science and Engineering, 2018, 43(5): 2593-2603.
[6] TAN Leichuan, GAO Deli, ZHOU Jinhui. A prediction model of casing wear in extended-reach drilling with buckled drillstring[J]. Journal of Applied Mechanics, 2018, 85(2): 1001-1011.
[7] LIAN Zhanghua, ZHANG Qing, LIN Tiejun, et al. Experimental study and prediction model of casing wear in oil and gas wells[J]. Journal of Pressure Vessel Technology, 2016, 138(3): 1404-1410.
[8] LIN T, ZHANG Q, LIAN Z, et al. Evaluation of casing integrity defects considering wear and corrosion-application to casing design[J]. Journal of Natural Gas Science and Engineering, 2016(29): 440-452.
[9] 屈展, 王小增, 窦益华, 等. 非均匀载荷作用下偏心磨损套管稳定性准则[J]. 工程力学, 2015, 32(7): 249-256.
[10] 王刚庆, 刘旭辉, 王小增, 等. 月牙形和偏心圆筒形内壁磨损套管应力分析[J]. 石油机械, 2013, 41(4):35-39.
[11] 王小增, 屈展, 窦益华, 等. 月牙形磨损套管抗内压强度计算[J]. 机械设计与制造, 2015(2):21-24.
[12] 冯进, 李东海,邓曦, 等. 磨损套管爆破强度应力应变分布规律研究[J]. 石油机械, 2012, 40(5): 33-36,85.
[13] 冯进, 张慢来, 李东海, 等.固井缺陷对磨损套管抗内压强度的影响[J]. 石油钻采工艺, 2012, 34(3): 48-51
[14] 梁尔国, 李子丰, 赵金海. 磨损套管抗挤强度计算模型[J]. 石油钻探技术, 2012,40 (2): 41-45.
[15] 梁尔国, 王仲民, 刘瑛, 等. 钻杆与套管摩擦磨损的试验研究[J]. 石油矿场机械, 2015,44 (2): 47-51.
[16] 于浩, 练章华, 冯智, 等. 石油套管偏磨后剩余强度的模拟分析[J]. 润滑与密封, 2015, 40(6): 25-31.
[17] 廖华林, 管志川, 马广军, 等. 深井超深井内壁磨损套管剩余强度计算[J]. 工程力学, 2010,27 (2): 250-256.
[18] 万立夫, 李根生, 管志川, 等. 深井内壁磨损套管剩余抗内压强度研究[J]. 石油机械, 2012, 40(5): 24-28.
[19] 陈占锋, 朱卫平, 狄勤丰, 等. 偏磨套管破裂强度三维弹塑性有限元分析[J]. 石油钻采工艺, 2013, 35(6): 1-4.
[20] 陈占锋, 朱卫平, 狄勤丰. 磨损套管抗内压强度的通用计算模型[J]. 应用力学学报, 2015, 32(6):967-972,1101.
[21] ASME B31G (1991), Manual for Determining the Remaining Strength of Corroded Pipelines[S].
[22] KIEFNER J F, VIETH P H. A modified criterion for evaluating the remaining strength of corroded pipe [R]. Report Prepared for American Gas Association, PR 3-805, 1989.
[23] CSA Z662—2007,Oil and gas pipeline system[S].
[24] DNV RP-F101(1999), corroded pipelines [S].
[25] LEIS B N, STEPHENS D R. An alternative approach to assess the integrity of corroded line pipe part I: current status; part II: alternative criterion[C]//Proc. of the 7th Int. offshore and polar engineering conference. [s.l.]: ISOPE, 1997: 624-641.
[26] RITCHIE D, LAST S. Burst criteria of corroded pipelines-defect acceptance criteria[C]//Proc. of the EPRG/RPC 10th Biennial Joint Technical Meeting on line pipe research. Cambridge, UK, 1995:1-11.
[27] CHEN Z, ZHU W, DI Q, et al. Prediction of burst pressure of pipes with geometric eccentricity[J]. Journal of Pressure Vessel Technology, 2015, 137(6): 1201-1208.
[28] CHEN Z, ZHU W, DI Q, et al. Burst pressure analysis of pipes with geometric eccentricity and small thickess-to-diameter ratio[J]. Journal of Petroleum Science and Engineering, 2015(127): 452-458.