[1]贾 帅,王志学,许建华,等.基于简明支架理论的管道最大悬空长度计算分析[J].焊管,2021,44(12):24-26,32.[doi:10.19291/j.cnki.1001-3938.2021.12.004]
 JIA Shuai,WANG Zhixue,XU Jianhua,et al.Calculation and Analysis of Maximum Hanging Length of Pipeline Based on Concise Support Theory[J].,2021,44(12):24-26,32.[doi:10.19291/j.cnki.1001-3938.2021.12.004]
点击复制

基于简明支架理论的管道最大悬空长度计算分析()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
第44卷
期数:
2021年第12期
页码:
24-26,32
栏目:
应用与开发
出版日期:
2021-12-28

文章信息/Info

Title:
Calculation and Analysis of Maximum Hanging Length of Pipeline Based on Concise Support Theory
文章编号:
10.19291/j.cnki.1001-3938.2021.12.004
作者:
贾 帅王志学许建华董一瑾
1.中航油京津冀物流有限公司,天津 300000;2. 河北工业大学,天津 300300
Author(s):
JIA Shuai WANG Zhixue XU Jianhua DONG Yijin
1. CNAF Beijing-Tianjin-Hebei Logistics Co., Ltd., Tianjin 300000, China; 2. Hebei University of Technology, Tianjin 300300, China
关键词:
油气管道悬空长度简明支架强度刚度
Keywords:
oil and gas pipeline hanging length concise scaffolding strength rigidity
分类号:
TG973.94
DOI:
10.19291/j.cnki.1001-3938.2021.12.004
文献标志码:
B
摘要:
为了准确计算管道安全情况下的极限悬空长度,按照简明支架理论对石油石化管道和一般工业管道悬空的最大安全长度进行了计算,比较了两者计算公式的差异,并结合工程实际给出了四种不同规格管材的计算结果。计算结果显示,石油石化管道和一般工业管道计算公式虽然不同,但计算结果差异很小,都能满足实际工程需要。研究表明,基于简明支架理论的管道最大悬空长度计算方法可为管道悬空状态下安全管理和管道建设、运行提供参考。
Abstract:
In order to accurately calculate the extreme impending length under the condition of pipeline safety, the maximum safety length of petroleum and petrochemical pipeline and the industrial pipeline is calculated according to the concise support theory, the differences between the two calculation formulas are compared, and the calculation results of four different specifications of pipes are given in combination with engineering practice. The calculation results show that although the calculation formulas of petroleum and petrochemical pipeline and general industrial pipeline are different, the difference of calculation results is very small, which can meet the needs of practical engineering. The research shows that the calculation method of maximum impending length of pipeline based on concise support theory can provide reference for safety management, pipeline construction and operation under impending state.

参考文献/References:

[1] 马廷霞,吴锦强,唐愚,等. 成品油管道的极限悬空长度研究[J]. 西南石油大学学报(自然科学版),2012,34(4):165-172.[2] 邓道明,周海新,申玉平. 横向滑坡过程中管道的内力和变形计算[J]. 油气储运,1998,17(7):18-22.[3] 王维,梁政. 关于悬垂管道计算模型的研究[J]. 天然气工业,1997,17(5):63-66.[4] 梁政. 石油工程中的若干力学问题[M]. 北京:石油工业出版社,1999.[5] 尚尔京,于永南. 地层塌陷区段埋地管道变形与应力分析[J].西安石油大学学报:自然科学版,2009(4):46-49,57.[6] 张昆. 复杂环境下埋地管道受力变形研究[D]. 成都:西南石油大学,2007.[7] 杜景水,马廷霞. 基于小挠度理论的悬空管道力学分析[J]. 油气储运,2009,28(1):16-18.[8] 邓道明,张庆元. 有/无固定墩跨越管道的内力和变形比较[J]. 油气储运,1999,18(6):6-14.[9] 高建,王德国,何仁洋,等. 基于应变的悬空管道性能分析[J]. 管道技术与设备,2011,6(6):13-15.[10] 李鹤林,李霄,吉玲康,等. 油气管道基于应变的设计及抗大变形管线钢的开发与应用[J]. 焊管,2007(5):5-10.[11] 刘冰,刘学杰,张宏. 基于应变的管道设计准则[J]. 天然气工业,2008,28(2):129-131.[12] 王小龙,姚安林. 埋地管道局部悬空的挠度和内力分析[J]. 工程力学,2008,25(8):218-222.[13] 王峰会,赵新伟. 高压管道黄土塌陷情况下的力学分析与计算[J]. 油气储运,2004,23(4):4-8.[14] 曲昭嘉,王瑾,曲圣伟,等. 简明管道支架计算及构造手册[M]. 北京:机械工业出版社,2002:39-48.[15] 王怀义. 石油化工管道安装设计便查手册[M]. 北京:中国石化出版社,2003:762-788.

相似文献/References:

[1]张振永,郭 彬.腐蚀管道剩余强度的确定及改造措施[J].焊管,2007,30(4):75.[doi:1001-3938(2007)04-0075-04]
 ZHANG Zhen-yong,GUO Bin.Determination of Residual Strength for Corrosion Pipeline and Rebuild Measures[J].,2007,30(12):75.[doi:1001-3938(2007)04-0075-04]
[2]徐庆磊,周 巍,尤海英,等.油气管道完整性管理体系分析[J].焊管,2007,30(6):81.[doi:1001-3938(2007)06-0081-04]
 XU QING-lei,LIU Ying,YOU Hai-ying,et al.Oil and Gas Pipeline Integrity Management System Analysis[J].,2007,30(12):81.[doi:1001-3938(2007)06-0081-04]
[3]刘 颖,刘长林,周 巍.油气管道的风险评价方法[J].焊管,2008,31(1):36.[doi:1001-3938(2008)01-0036-04]
 LIU Ying,LIU Chang-ling,ZHOU Wei.Risk Assessment of Oil-gas Pipeline[J].,2008,31(12):36.[doi:1001-3938(2008)01-0036-04]
[4]李为卫.油气输送管道用大直径双层埋弧焊管[J].焊管,2009,32(3):27.[doi:1001-3938(2009)03-0027-04]
 LI Wei-wei.Large Diameter& Double Layer SAW Linepipe for Oil and Gas[J].,2009,32(12):27.[doi:1001-3938(2009)03-0027-04]
[5]覃海涛,王爱民.管道补焊强度有限元分析[J].焊管,2009,32(7):22.[doi:1001-3938(2009)07-0022-04]
 QIN Hai-tao,WANG Ai-min.Finite Element Analysis of Repair Welding Strength in Oil Pipeline[J].,2009,32(12):22.[doi:1001-3938(2009)07-0022-04]
[6]薛振奎,隋永莉.焊接新技术在我国管道建设中的应用[J].焊管,2010,33(4):58.[doi:1001-3938(2010)04-0058-04]
 XUE Zhen-kui,SUI Yong-li.The Application of the New Welding Technology in Our Country Pipeline Construction[J].,2010,33(12):58.[doi:1001-3938(2010)04-0058-04]
[7]吉建立,许 勇,黄 龙,等.国内外油气管道防腐层阴极剥离试验方法及标准对比[J].焊管,2013,36(10):68.[doi:1001-3938(2013)10-0068-05]
 JI Jianli,XU Yong,HUANG Long,et al.Comparison of Cathodic Disbondment(CD) Test Methods andCriteria Between Overseas and China Oil and Gas Pipeline[J].,2013,36(12):68.[doi:1001-3938(2013)10-0068-05]
[8]郑茂盛,滕海鹏,胡 军,等.灰色理论用于油气管道安全性评价值得注意的问题[J].焊管,2013,36(11):20.[doi:1001-3938(2013)11-0020-03]
 ZHENG Maosheng,TENG Haipeng,HU Jun,et al.Notable Problems of Grey Theory Used in Safety Evaluation of Oil and Gas Pipeline[J].,2013,36(12):20.[doi:1001-3938(2013)11-0020-03]
[9]隋永莉,曹晓军,胡小坡.油气管道环焊缝焊接施工应关注的问题及建议[J].焊管,2014,37(5):62.[doi:1001-3938(2014)05-0062-04]
 SUI Yongli,CAO Xiaojun,HU Xiaopo.Focus on Problems and Suggestions of Oil and Gas Pipeline Circumferential Weld Welding at Site Construction[J].,2014,37(12):62.[doi:1001-3938(2014)05-0062-04]
[10]王国丽,庞艳风,谭建辉,等.油气管道全尺寸气体爆破试验场方案探讨[J].焊管,2015,38(4):33.[doi:1001-3938(2015)04-0033-05]
 WANG Guoli,PANG Yanfeng,TAN Jianhui,et al.Discussion on Full-size Gas Burst Test Field Used for Oil and Gas Pipeline[J].,2015,38(12):33.[doi:1001-3938(2015)04-0033-05]

备注/Memo

备注/Memo:
收稿日期: 2021-06-18作者简介:贾 帅(1990—),男,工程师,硕士,现主要从事输油管道相关方向的研究工作。
更新日期/Last Update: 2022-01-04