[1]徐 凯,唐家睿,杨晓龙,等.水平井用套管接头评价方法研究[J].焊管,2021,44(12):47-52.[doi:10.19291/j.cnki.1001-3938.2021.12.009]
　XU Kai,TANG Jiarui,YANG Xiaolong,et al.Study on Evaluation Method of Casing Joint for Horizontal Well[J].,2021,44(12):47-52.[doi:10.19291/j.cnki.1001-3938.2021.12.009]
点击复制

水平井用套管接头评价方法研究()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
第44卷
期数:
2021年第12期
页码:
47-52
栏目:
国外焊管
出版日期:
2021-12-28

文章信息/Info

Title:
Study on Evaluation Method of Casing Joint for Horizontal Well
文章编号:
10.19291/j.cnki.1001-3938.2021.12.009
作者:
徐 凯; 唐家睿; 杨晓龙; 魏耀奇; 田永强; 李 超; 董 超
1. 国家石油天然气管材工程技术研究中心，陕西 宝鸡 721008；2. 宝鸡石油钢管有限责任公司，陕西 宝鸡 721008
Author(s):
XU Kai;  TANG Jiarui;  YANG Xiaolong;  WEI Yaoqi;  TIAN Yongqiang;  LI Chao;  DONG Chao
1. Chinese National Engineering Research Center for Petroleum and Natual Gas Tubular Goods, Baoji 721008, Shaanxi, China; 2. Baoji Petroleum Steel Pipe Co., Ltd., Baoji 721008, Shaanxi, China
关键词:
水力压裂; 套管与固井; 套管接头; 连接性评价
Keywords:
hydraulic fracturing;  casing and cementing;  casing joint;  connectivity evaluation
分类号:
TG115.5
DOI:
10.19291/j.cnki.1001-3938.2021.12.009
文献标志码:
B
摘要:
概述了水力压裂技术采用的套管接头性能评价方法的发展史，重点研究了API TR 5SF套管连接性能评估方法。研究表明，API TR 5SF是根据多段水平压裂井（MFHW）中存在的工艺驱动循环载荷指定的套管接头评价协议，该协议允许根据用户的需求灵活定制检测方案，推荐试验程序遵循接头上卸扣安装载荷、下套管载荷、压裂载荷、生产载荷的加载顺序。最后，以大位移水平井用套管接头和一种半直连型套管接头为例，根据用户需求按照API TR 5SF制定了满足要求的评价试验程序。
Abstract:
The development history of casing joint performance evaluation method used in hydraulic fracturing technology is summarized and the evaluation method of API TR 5SF casing connection performance is focused. The research shows that API TR 5SF is a casing joint evaluation protocol based on the process driven cyclic load in MFHW well. The protocol allows the flexible detection scheme according to the needs of users, and the recommended test procedure follows the loading sequence of the connection makeup loads，casing running loads，stimulation loads and production loads. Finally, taking the casing joint for extended reach horizontal well and a semi-direct connection casing joint as an example, the evaluation and test procedures meeting the requirements are formulated according to API TR 5SF according to the needs of users.

参考文献/References:

译自：HAMILTON K，PATTILLO P D. Developing an evaluation method for casing connections used in hydraulically fractured wells[C] // SPE Hydraulic Fracturing Technology Conference and Exhibition. 2019.

相似文献/References:

[1]刘少胡,徐泽庆,苑清英,等.超深井变径连续管冲蚀磨损规律研究[J].焊管,2023,46(7):45.[doi:10.19291/j.cnki.1001-3938.2023.07.006]
　LIU Shaohu,XU Zeqing,YUAN Qingying,et al.Research on Erosion Law of Variable Diameter Coiled Tubing in Ultra Deep Wells[J].,2023,46(12):45.[doi:10.19291/j.cnki.1001-3938.2023.07.006]

备注/Memo

备注/Memo:
收稿日期：2021-08-11基金项目： 中国石油天然气集团有限公司科技项目“提高页岩气井抗套损能力的新型套管研发”（项目编号2020B-4020）。译者简介：徐　凯（1987—），硕士，工程师，主要从事油气管道力学性能研究。
更新日期/Last Update: 2022-01-04