[1]王益铭,王海军,彭志刚.拱顶储罐单盘式内浮盘更换施工工艺改进[J].焊管,2022,45(8):61-64.[doi:10.19291/j.cnki.1001-3938.2022.08.012]
　WANG Yiming,WANG Haijun,PENG Zhigang.Improvement of Replacement Construction Technology of Single Plate Internal Floating Plate of Dome Roof Storage Tank[J].,2022,45(8):61-64.[doi:10.19291/j.cnki.1001-3938.2022.08.012]
点击复制

拱顶储罐单盘式内浮盘更换施工工艺改进()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
45
期数:
2022年第8期
页码:
61-64
栏目:
经验交流
出版日期:
2022-08-28

文章信息/Info

Title:
Improvement of Replacement Construction Technology of Single Plate Internal Floating Plate of Dome Roof Storage Tank
文章编号:
10.19291/j.cnki.1001-3938.2022.08.012
作者:
王益铭; 王海军; 彭志刚
1.兰州石化公司，兰州730060； 2.中国石油管道局工程有限公司亚太公司，河北廊坊065000
Author(s):
WANG Yiming;  WANG Haijun;  PENG Zhigang
1.Lanzhou Petrochemical Company， Lanzhou 730060， China；2. China Petroleum Pipeline Engineering Co.， Ltd.， Asia Pacific， Langfang 065000，Hebei，China
关键词:
拱顶储罐; 内浮盘; 检修更换; 焊缝真空试漏
Keywords:
dome roof storage tank;  inner floating plate;  maintenance and replacement;  weld vacuum leak test
分类号:
TG151.1
DOI:
10.19291/j.cnki.1001-3938.2022.08.012
文献标志码:
A
摘要:
拱顶罐区检修施工现场一般远离厂区道路，且由于内浮盘板较薄，大跨距吊运浮盘易造成构件变形，不仅影响内浮盘焊接质量，而且影响内浮盘接液能力。通过设计临时通道倒运工装和改变浮顶临时胎具的搭设方式，提高了单盘板铺设的平整度；将环形船舱在厂房内进行分段模块化制造，控制内浮盘组装及焊接顺序，采用细丝熔化极半自动气体保护焊对单盘板及环舱搭接角焊缝进行焊接等工艺措施，有效控制了内浮盘的焊接变形。通过经济效益对比分析，改进后的施工工艺高效、快捷，经济效益显著。
Abstract:
The maintenance construction site of the dome roof tank area is generally far away from the roads in the plant， with thin inner floating plate， large deformation of floating plate components for long-span hoisting， and dense intersection of welds in the tank， which not only afcts the welding quality of the inner floating plate， but also afcts the liquid receiving capacity of the inner floating plate. The flatness of single plate laying is improved by designing the temporary channel transportation tooling and changing the erection mode of the temporary mould of the floating roof. The welding deformation of the inner floating plate is effectively controlled through the improvement of the process measures such as the sectional modular manufacturing of the annular cabin in the plant， the control of the assembly and welding sequence of the inner floating plate， and the welding of the lap fillt weld of the single plate and the annular cabin by using the filament melting electrode semi-automatic gas shielded welding. Through the comparative analysis of economic benefits， it is verified that the process is effcient and fast， and the economie benefits are remarkable.

参考文献/References:

[1]孔昭瑞.我国组装式浮盘的发展与建议[J]油气储运，2010， 29(11):803-805.[2]穆道彬.组装式内浮盘的发展与应用研究[J].化工管理，2016(36):47.[3]王克田，李志军. FGZLFD I型组装式铝浮盘在储油罐中的应用[J].炼油与化工，2005(1):45.[4]魏列民，魏邦琦.全接液蜂窝铝浮盘运行与检维修风险控制[J].石油化工应用，2022，41(2):112-114.[5]黄玲，徐玉梅，顾玉佳.组装式内浮顶罐的技术改造[J].油气田地面工程，1999(4):62-63.[6]丁少军，梁观治.组装式铝制内浮顶使用情况调查及分析[J].石油化工设备，2012，41(5):66-70.[7]张晓东.大型储罐单盘施工工艺[J].石油工程建设，2009，35(2): 73-76.[8]王京.储罐钢质内浮顶整体提升工艺及稳定性校核[J].电焊机，2016，46(7):121-123.[9]蒋章发.CO2+Ar混合气体保护焊在低合金高强钢中应用[J].金属加工研究与应用，2009(6):39-40.[10]方恭庆.单向倾斜底大型立式储罐的设计与安装[J].化工设备设计， 1994(4):46-48.

备注/Memo

备注/Memo:
收稿日期：2022-05-27作者简介:王益铭(1984—)， 男，工程师，长期从事石油化工设备制造、焊接专业技术工作。
更新日期/Last Update: 2022-08-26