[1]田永强,唐家睿,焦 炜,等.进给方式对AISI 304L不锈钢螺纹车削的影响[J].焊管,2022,45(12):57-61.[doi:10.19291/j.cnki.1001-3938.2022.12.010]
　Translated by TIAN Yongqiang,TANG Jiarui,JIAO Wei,et al.Effects of the Infeed Method on Thread Turning of AISI 304L Stainless Steel[J].,2022,45(12):57-61.[doi:10.19291/j.cnki.1001-3938.2022.12.010]
点击复制

进给方式对AISI 304L不锈钢螺纹车削的影响()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
45
期数:
2022年第12期
页码:
57-61
栏目:
国外焊管
出版日期:
2022-12-28

文章信息/Info

Title:
Effects of the Infeed Method on Thread Turning of AISI 304L Stainless Steel
文章编号:
10.19291/j.cnki.1001-3938.2022.12.010
作者:
田永强; 唐家睿; 焦 炜; 汪 强; 周新义; 杨晓龙; 张晓华 编译
1. 国家石油天然气管材工程技术研究中心， 陕西 宝鸡 721008； 2. 宝鸡石油钢管有限责任公司， 陕西 宝鸡 721008
Author(s):
Translated by TIAN Yongqiang;  TANG Jiarui;  JIAO Wei;  WANG Qiang;  ZHOU Xinyi;  YANG Xiaolong;  ZHANG Xiaohua
1. Chinese National Engineering Research Center for Petroleum and Natural Gas Tubular Goods, Baoji 721008，Shaanxi, China; 2. Baoji Petroleum Steel Pipe Co., Ltd., Baoji 721008, Shaanxi, China
关键词:
螺纹加工; 进给方式; 切削温度; 不锈钢; 显微硬度
Keywords:
thread machining;  infeed method;  cutting temperature;  stainless steel;  microhardness
分类号:
TG62，TG142
DOI:
10.19291/j.cnki.1001-3938.2022.12.010
文献标志码:
A
摘要:
为了得到AISI 304L不锈钢螺纹最优的车削进给方式，通过对比径向、侧面和增量三种不同的进给方式在加工过程中温度、刀具寿命、螺纹表面的显微硬度变化，研究了不同进给方式对AISI 304L不锈钢螺纹车削的影响。试验结果表明，在加工过程中，采用径向进给的车削方式产生的温度最高，随之依次是侧面进给和增量进给；进给方式直接影响刀具的使用寿命，而刀具寿命与刀尖磨损密切相关，刀尖磨损一定程度上会导致螺纹轮廓的偏差；使用增量进给的车削方式可降低温度、延长刀具寿命并减少螺纹表面硬化深度。
Abstract:
In order to study the optimal infeed method on AISI 304L stainless steel thread turning, thread machining with three different infeed methods are carried out, radial, side and incremental. By comparing the test results of temperature, tool life and microhardness of thread surface in the machining process of three different infeed methods, the influence of the different infeed methods to the AISI 304L stainless steel thread turning is studied. The experimental results show that the processing mode that produces the highest temperature in the processing is radial feed, followed by side feed and incremental feed. Feed method plays an important role in determining tool life. Tool life is mainly limited by tool tip wear, which will lead to the deviation of thread profile. The use of incremental feed can reduce the temperature, prolong the tool life and reduce the depth of thread surface hardening.

参考文献/References:

译自：COSTA C E，POLLI M L. Effects of the infeed method on thread turning of AISI 304L stainless steel[J].Journal of the Brazilian Society of Mechanical Sciences and Engineering，2021，43（5）：1-9.

相似文献/References:

[1]艾裕丰,吴 健,卫尊义,等.API油管和套管螺纹加工与检验探讨[J].焊管,2013,36(5):45.[doi:１００１－３９３８（２０１3）05-0045-05]
　AI Yufeng,WU Jian,WEI Zunyi,et al.Discussion on Threading and Inspection of API Casing and Tubing[J].,2013,36(12):45.[doi:１００１－３９３８（２０１3）05-0045-05]
[2]杨兵兵,童楠楠,郭 鹏,等.接箍螺纹首扣毛刺去除方法[J].焊管,2021,44(4):58.[doi:10.19291/j.cnki.1001-3938.2021.04.012]
　YANG Bingbing,TONG Nannan,GUO Peng,et al.Deburring Method of the First Thread Burr of Coupling[J].,2021,44(12):58.[doi:10.19291/j.cnki.1001-3938.2021.04.012]
[3]李六五,童楠楠,彭建军,等.油套管接箍螺纹加工工艺优化及常见问题处理[J].焊管,2021,44(6):47.[doi:10.19291/j.cnki.1001-3938.2021.06.009]
　LI Liuwu,TONG Nannan,PENG Jianjun,et al.Optimization of Processing Technology of Tubing and Casing Coupling Thread and Solutions of Common Problems[J].,2021,44(12):47.[doi:10.19291/j.cnki.1001-3938.2021.06.009]
[4]彭建军,周雅娣,童楠楠,等.油套管管端车丝常见问题与对策[J].焊管,2023,46(6):65.[doi:10.19291/j.cnki.1001-3938.2023.06.011]
　PENG Jianjun,ZHOU Yadi,TONG Nannan,et al.Problems and Solutions of Oil and Casing Pipe End Threading[J].,2023,46(12):65.[doi:10.19291/j.cnki.1001-3938.2023.06.011]

备注/Memo

备注/Memo:
收稿日期：2022-02-08作者简介：田永强（1994—），硕士，助理工程师，主要从事油井管产品研究与开发工作。
更新日期/Last Update: 2023-01-06