参考文献/References:
[1] LIU S. Investigation of the impact toughness of self-shielded flux cored wire girth welds for X80 pipelines [J]. Baosteel Technical Research，2014，8（4）：53-59.
[2] NOBUYUKI ISHIKAWA, TOYOHISA SHINMIYA, SATOSHI IGI，et al. Toughness evaluation on seam weld HAZ of high strength UOE pipeline[C] // 6th International Pipeline Conference. Calgary, Canada：[s.n.]，2006.
[3] 黄福祥，隋永莉，王纪. 西气东输冀宁支线X80钢工业性应用工程中的焊接技术[J]. 焊接技术，2007 （3）：58-59.
[4] 熊林玉，杜则裕，董丽红，等. 高强度X80钢管道的焊接[J]. 石油工程建设，2004 （2）：31-34.
[5] 张彦华. 焊接力学与结构完整性原理[M]. 北京：北京航空航天大学出版社，2007.
[6] 黄治军，缪凯，曹修悌，等. 管线钢焊接接头抗HIC性能分析[J]. 钢铁研究，2004 （6）：14-20.
[7] LIU S. Girth weldability and welding process of Baosteel X80 UOE linepipes[J]. Baosteel Technical Research，2010 （3）：15-19.
[8] WANG Y Y，WANG B，LIU B L，et al. Strain capacity of vintage girth welds and integrity management process [C]// 22nd Joint Technical Meeting（JTM）. Brisbane，Australia：[s.n.]，2019.
[9] HIROYUKI MOTOHASHI，NAOTO HAGIWARA. Effect of strength matching on ductile fracture behaviour of X80 linepipe girth weld subject to tensile loading [J]. Material Science Forum，2007（539-543）：2204-2209.
[10] WANG Y Y，JIA D，DAVID J，et al. Low strain capacity girth welds of newly constructed pipelines and its implications in integrity management[C] // 22nd Joint Technical meeting（JTM）. Brisbane，Australia：[s.n.]，2019.
[11] ZHU X K，JOYCE J A. Review of fracture toughness （G, K, J, CTOD, CTOA） testing and standardization [J]. Engineering Fracture Mechanics，2012（85）：1-46.
[12] 曲文卿，张彦华，张鹏，等. 油气管道环焊接头断裂性能的不均匀性分析[J]. 焊管，2006，23（6）：11-15.
[13] WU Y Y, YUAN W G, JENS P T, et al. Fracture toughness testing and validation of pipeline girth weld flaw acceptance criteria for sour service under large strain [C]//Proceedings of the ASME 2011 30th International Conference on Ocean，Offshore and Arctic Engineering. Rotterdam，The Netherlands：[s.n.]，2011.
[14] DNVGL-RP-F108，Assessment of Flaws in Pipeline and Riser Girth Welds [S].
[15] 陈玉华，王勇，韩彬. X70 管线钢在役焊接局部脆化区的组织及精细结构[J]. 材料热处理学报， 2007，28（1）：79-82.
[16] NOBUYUKI ISHIKAWA, TOYOHISA SHINMIYA, SATOSHI IGI, et al. Toughness evaluation on seam weld HAZ of high strength UOE linepipe [C] //6th International Pipeline Conference. Calgary, Alberta, Canada：[s.n.]，2006.
[17] 余大涛，李岩，高惠临. X65管线钢二次焊接热循环的局部脆化[J]. 焊管，2001，24（5）：11-16.
[18] 张小立，庄传晶，冯耀荣，等. X80级管线钢焊接热影响区的局部脆化[J]. 钢铁，2007，42（3）：69-72.
[19] 兆文忠，李向伟，董平沙. 焊接结构抗疲劳设计理论与方法 [M]. 北京：机械工业出版社，2016.
[20] YUAN W G, XU D Q, WU Y Y, et al. Effects of strain rate on fracture toughness in sour environment [C] //Proceedings of the ASME 2010 29th International Conference on Ocean，Offshore and Arctic Engineering. Shanghai，China：[s.n.]，2010.
[21] 王建平，霍立兴，许永泰，等. 海底油气外输管线的断裂和疲劳评定[J]. 管道技术与装备，2006（6）：4-7.
[22] 邓彩艳，张玉凤，霍立兴，等. 海底管线用钢焊接接头的安全评定及寿命预测[J]. 天津大学学报，2004，37（2）：121-125.
[23] BS 7910，Guide to Methods for Assessing the Acceptability of Flaws in Metallic Structures [S].
[24] DNVGL-ST-F101，Submarine Pipeline Systems [S].
相似文献/References:
[1]杨天冰,郭瑞杰,白世武,等.X70级管道环焊缝接头残余应力数值模拟[J].焊管,2008,31(4):21.[doi:1001－3938（2008）04－0021－07]
YANG Tian-bing,GUO Rui-jie,BAI Shi-wu,et al.Residual Stress Simulation of X70 Pipeline Girth Welding Joint[J].,2008,31(4):21.[doi:1001－3938（2008）04－0021－07]
[2]牛靖,刘迎来,王鹏,等.F52法兰/X52接管环焊接头开裂原因浅析[J].焊管,2011,34(8):13.
[3]尹长华,王建国,姚登樽.Nb-Cr X80管线钢管焊接接头断裂韧性的研究[J].焊管,2011,34(9):18.
[4]姚登樽,尹长华,肖美珍,等.Nb-Cr X80管线钢管焊接接头可靠性分析[J].焊管,2012,35(1):16.[doi:1001-3938（2012）01-0016-05]
YAO Deng-zun,YIN Zhang-hua,XIAO Mei-zhen,et al.Study on the Reliability of Nb-Cr X80 Line Pipe Welded Joint[J].,2012,35(4):16.[doi:1001-3938（2012）01-0016-05]
[5]齐丽华,刘小峰,刘迎来,等.X80螺旋埋弧焊管对接环焊接头失效裂纹分析[J].焊管,2012,35(6):16.[doi:１００１－３９３８（２０１２）０6-0016-06]
QI Li-hua,LIU Xiao-feng,LIU Ying-lai,et al.Cracking Reason Analysis on Circumferential Welded Joints of X80 SAWH Pipe[J].,2012,35(4):16.[doi:１００１－３９３８（２０１２）０6-0016-06]
[6]齐丽华,刘小峰,刘润清,等.站场螺旋焊管环焊缝接头失效原因分析[J].焊管,2013,36(1):54.[doi:１００１－３９３８（２０１3）01-0054-06]
QI Lihua,LIU Xiaofeng,LIU Runqing,et al.Cracking Reason Analysis on Circumferential Welded Joints of Spiral Submerged Arc Welded Pipe[J].,2013,36(4):54.[doi:１００１－３９３８（２０１3）01-0054-06]
[7]隋永莉.大应变钢管在管道建设中的应用及现场焊接技术[J].焊管,2013,36(6):32.[doi:１００１－３９３８（２０１3）06-0032-05]
SUI Yongli.Application and Field Welding Technology of Large Strain Steel Pipe in Pipeline Construction[J].,2013,36(4):32.[doi:１００１－３９３８（２０１3）06-0032-05]
[8]齐丽华,王 磊,杨耀斌,等.X80管线钢半自动自保护药芯环焊接头性能影响因素研究[J].焊管,2021,44(6):7.[doi:19291/j.cnki.1001-3938.2021.06.002]
QI Lihua,WANG Lei,YANG Yaobin,et al.Influence Factors of Performance of Semi-automatic Self Shielded Flux Cored Girth Welding Joint of X80 Pipeline Steel[J].,2021,44(4):7.[doi:19291/j.cnki.1001-3938.2021.06.002]
[9]齐丽华,王 磊,高雄雄,等.FCAW-S工艺条件下X80环焊接头性能及安全运行影响因素研究[J].焊管,2021,44(8):1.[doi:10.19291/j.cnki.1001-3938.2021.08.001]
QI Lihua,WANG Lei,GAO Xiongxiong,et al.Study on the Influencing Factors of Performance and Safe Operation of X80 Girth Welding Joint under FCAW-S Welding Process[J].,2021,44(4):1.[doi:10.19291/j.cnki.1001-3938.2021.08.001]
[10]何小东,杨耀彬,David Han,等.强度匹配对X80螺旋埋弧焊管环焊接头宽板拉伸性能的影响[J].焊管,2023,46(4):1.[doi:10.19291/j.cnki.1001-3938.2023.04.001]
HE Xiaodong,YANG Yaobin,HAN David,et al.Effect of Strength Matching on Wide Plate Tensile Properties of GMAW Girth Welded Joint of X80 Submerged?rc Welded Helical Pipe[J].,2023,46(4):1.[doi:10.19291/j.cnki.1001-3938.2023.04.001]