[1]刘志宏,郁 杰,吴杰峰.CICC导体缩径过程的有限元仿真[J].焊管,2007,30(4):44-46.[doi:1001-3938(2007)04-0044-03]
 LIU Zhi-hong,YU Jie,WU Jie-feng.FEM Simulation of Compaction for CICC[J].,2007,30(4):44-46.[doi:1001-3938(2007)04-0044-03]
点击复制

CICC导体缩径过程的有限元仿真
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
30
期数:
2007年第4期
页码:
44-46
栏目:
应用与开发
出版日期:
2007-07-28

文章信息/Info

Title:
FEM Simulation of Compaction for CICC
文章编号:
1001-3938(2007)04-0044-03
作者:
刘志宏郁 杰吴杰峰
(中国科学院等离子体物理研究所)
Author(s):
LIU Zhi-hongYU JieWU Jie-feng
关键词:
CICC缩径有限元法
Keywords:
CICCcompactionfinite element method(FEM)
分类号:
TG335.71
DOI:
1001-3938(2007)04-0044-03
文献标志码:
A
摘要:
利用显式动力学有限元分析软件ANSYS/LS-DYNA仿真了CICC(Cable in Conduit Conductor)导体的缩径过程,研究了不同轧制速度和摩擦系数条件下轧制力的变化规律。模拟了导体缩径过程中卷入和稳定轧制时导体内应力、应变的变化过程,分析了缩径过程中钢管的弹复行为。另外对轧制仿真过程中网格密度对计算精度的影响也进行了计算和比较。其结果为CICC导体的研制提供了依据。
Abstract:
The explicit dynamic finite element analysis software ANSYS/LS-DYNA was used to simulate the process of CICC(Cable in Conduit Conductor)compaction. Relation between rolling speed,meshing density,friction coefficient and rolling force was studied.It is found that rolling force increases with the increase of the friction coefficient.Rolling force is almost constant during steady state rolling.Stress and metal flow in steel tube during sizing process were analyzed.And the effect of the strip mesh density on the simulation result is also studied in this paper.The findings provide a important basis for the design and produce of the CICC.

参考文献/References:

[1]陈思跃.EAST超导TOKAMAK装置CICC导体及接头制造工艺研究[D].合肥:中国科学院等离子体物理研究所,2006.
[2]刘立忠,刘相华,王国栋.轧制过程的显式动力学有限元法模拟[J].东北大学学报,2001,22(3):327-330.
[3]周纪华,管克智.金属塑性变形阻力[M].北京:机械工业出版社,1989.
[4]孙一康.带钢热连轧的模型与控制[M].北京:冶金工业出版社,2002.
[5]日本钢铁协会.板带轧制理论与实践[M].王国栋,吴国良,译.北京:中国铁道出版社,1990.
[6]张小平,柳玉伟,李志永.双道次辊挤成型过程挤压力公式的建立[J].太原重型机械学院学报,2005,26(1):16-21.
[7]FURUMOTO H,YAMADA K.Effect of the Number of Workroll Surface Division on Prediction of Contact Length in Coupled Analysis of Roll and Strip Deformation During Sheet Rolling[J].ISIJ Internation,2002,42(7):736-743.

备注/Memo

备注/Memo:
刘志宏(1983-),男,中国科学院等离子体物理研究所硕士研究生,主要研究方向为CICC导体的研制。
更新日期/Last Update: