[1]何小东,马秋荣,王长安,等.高强度管线钢焊接接头不同缺口位置的断裂韧性研究[J].焊管,2009,32(8):21-25.[doi:1001－3938（2009）08－0021－05]
　HE Xiao-dong,MA Qiu-rong,WANG Chang-an,et al.Fracture Toughness of Welded joints at Different Notch Location and Discussion of Specifications for High Strength line Pipe[J].,2009,32(8):21-25.[doi:1001－3938（2009）08－0021－05]
点击复制

高强度管线钢焊接接头不同缺口位置的断裂韧性研究
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
32
期数:
2009年第8期
页码:
21-25
栏目:
试验与研究
出版日期:
2009-08-28

文章信息/Info

Title:
Fracture Toughness of Welded joints at Different Notch Location and Discussion of Specifications for High Strength line Pipe
文章编号:
1001－3938（2009）08－0021－05
作者:
何小东; 马秋荣; 王长安; 庄传晶; 杨红兵; 卫尊义; 张蕾
（中国石油天然气集团公司管材研究所，西安 710065）
Author(s):
HE Xiao-dong; MA Qiu-rong; WANG Chang-an; ZHUANG Chuan-jing; YANG Hong-bing; WEI Zun-yi; ZHANG Lei
(Tubular Goods Research Center of China National Petroleum Corporation,Xi’an 710065,China)
关键词:
高强度管线钢; X80/X100钢级; 焊接接头; 缺口位置; 断裂韧性
Keywords:
high-strength pipeline steel; X80/X100 grade; welded joint; location of notch; fracture toughness
分类号:
TG457.6
DOI:
1001－3938（2009）08－0021－05
文献标志码:
A
摘要:
采用夏比冲击试验，研究了X65级高频焊管、X80和X100级埋弧焊管焊接接头不同缺口位置的断裂韧性，用扫描电镜和金相方法分析了冲击试样断口特征和微观组织。结果表明，高钢级管线钢高频焊接焊缝处的断裂韧性最低，其冲击功大小与热处理工艺密切相关；而埋弧焊接热影响区断裂韧性在熔合线处最低，其主要原因是此处的组织为粗大的粒状贝氏体，而且强度越高焊接热循环对管线钢的作用越强，在熔合线附近更容易产生粗大组织，使断裂韧性降低。讨论了油气输送管道用钢管标准和技术条件对焊缝和热影响区冲击试样缺口位置的规定。
Abstract:
The fracture toughness of welded joint at different notch location were studied by Charpy impact test for X65 grade high frequency welded (HFW) pipe,X80 and X100 grade submerged arc welded (SAW) pipe.The fractography and microstructure of impact specimen were also studied by means of SEM and metallographic analysis.The results showed that the fracture toughness of the weld of HFW pipe was lowest.The value of absorbed energy of HFW weld was closely related to the heat treatment process.But the fracture toughness of fusion zone of submerged-arc welded jointer,its microstructure was coarse granular bainite,and was lower than the other locations of heat affected zone (HAZ);and with the increasing of steel strength,the effect of welding heat cycles on the pipeline steel became stronger,and form coarse microstructure in fusion zone leading to decrease fracture toughness.Furthermore,the requirements to the location of notch of impact specimen of weld and HAZ,in some standards and technical specifications of steel pipe used for petroleum and natural gas transportation were discussed.

参考文献/References:

［1］张小立，庄传晶，吉玲康，等.高钢级管线钢的特征参量及其与强韧性的关系［J］.材料工程，2006(8)：3－7.
［2］王勇，韩涛，刘敏.X70管线钢焊接热影响区的局部脆化［J］.材料工程，1999（10）:14-20.
［3］李为卫，刘亚旭， 高惠临，等. X80管线钢焊接热影响区的韧性分析［J］.焊接学报，2006，27（2）：43－46.
［4］郝瑞辉，牛 辉，高惠临.X80级管线钢焊接热影响区不同区域的韧性分布［J］.焊管，2006，29（1）:23－25.
［5］GB/T 9711.3—2005, 石油天然气工业 输送钢管交货技术条件 第3部分:C级钢管［S］.
［6］Q/SY GJX 0104—2007,西气东输二线管道工程用直缝埋弧焊管技术条件［S］.
［7］Q/SY XQ 125—2003,西气东输管道工程用直缝埋弧焊管技术条件［S］.
［8］ISO 3183:2007(E),Petroleum and natural gas industries-Steel pipe for pipeline transportation systems［S］.
［9］陈翠欣，李午申，王庆鹏，等.X80管线钢焊接粗晶区的组织和性能［J］.焊接学报，2005，26（6）:77－80.

相似文献/References:

[1]张朝生　编译.高强度管道钢管表面应力腐蚀裂纹的研究[J].焊管,2007,30(4):82.[doi:1001－3938（2007）04－0083－03]
　Edited and Translated by ZHANG Chao-sheng.Study on Surface Stress Corrosion Crack of High Strength Pipeline[J].,2007,30(8):82.[doi:1001－3938（2007）04－0083－03]
[2]潘家华.全球能源变换及管线钢的发展趋势[J].焊管,2008,31(1):9.[doi:1001－3938（2008）01－0009－03]
　PAN Jia-hua.Transformation of Globe Energy & Developing Trend of Pipeline Steel[J].,2008,31(8):9.[doi:1001－3938（2008）01－0009－03]
[3]陈 妍,毛艳丽.日本高强度管线钢生产概述[J].焊管,2009,32(3):64.[doi:1001－3938（2009）03－0064－05]
　Chen Yan,MAO Yan-li.Production Summarization of JAPAN Pipeline Steel with High Strength[J].,2009,32(8):64.[doi:1001－3938（2009）03－0064－05]
[4]杨扬,李为卫 编译.高强度管线钢DWTT性能研究[J].焊管,2010,33(10):74.[doi:1001-3938(2010)10-0074-06]
　Edited and Translated by YANG Yang,LI Wei-wei.Research on DWTT Properties of High Strength Pipeline Steel[J].,2010,33(8):74.[doi:1001-3938(2010)10-0074-06]
[5]许晓锋,高豹华 编译.塑性变形对落锤撕裂试验异常断口的影响[J].焊管,2015,38(7):58.[doi:１００１－３９３８（２０１5）07-0058-06]
　Edited and Translated by XU Xiaofeng,GAO Baohua.Effect of Plastic Deformation on Occurrence of Abnormal Fracture During DWTT[J].,2015,38(8):58.[doi:１００１－３９３８（２０１5）07-0058-06]
[6]牛爱军,等.深海用高强厚壁直缝埋弧焊管开发技术难点分析[J].焊管,2015,38(11):15.[doi:１００１－３９３８（２０１5）11-0015-05]
　NIU Aijun,YIN Lihong,et al.Technical Difficulties Analysis on Development of SAWL Pipe Used for Deep-sea Pipeline with High Strength and Heavy Wall Thickness[J].,2015,38(8):15.[doi:１００１－３９３８（２０１5）11-0015-05]
[7]黄景鹏,徐学利,王洪铎,等.高强度管线钢焊接性研究现状[J].焊管,2016,39(8):19.[doi:10.19291/j.cnki.1001-3938.2016.08.005]
　HUANG Jingpeng,XU Xueli,WANG Hongduo,et al.Research Current Status of High Strength Pipeline Steel Weldability[J].,2016,39(8):19.[doi:10.19291/j.cnki.1001-3938.2016.08.005]
[8]郑梗梗,徐学利,王洪铎.高强度管线钢焊接性影响因素分析[J].焊管,2017,40(1):36.[doi:10.19291/j.cnki.1001-3938.2017.01.007]
　ZHENG Genggeng,XU Xueli,WANG Hongduo.Influence Factors Analysis of High Strength Pipeline Steel Weldability[J].,2017,40(8):36.[doi:10.19291/j.cnki.1001-3938.2017.01.007]
[9]孙 宏 编译.高强度管线钢力学性能和冶金特性的最新进展[J].焊管,2017,40(9):62.[doi:10.19291/j.cnki.1001-3938.2017.09.014]
　Translated by SUN Hong.Latest Developments in Mechanical Properties and Metallurgical Features of High Strength Line Pipe Steels[J].,2017,40(8):62.[doi:10.19291/j.cnki.1001-3938.2017.09.014]

备注/Memo

备注/Memo:
作者简介：何小东（1970－），男，四川三台人，硕士，国际焊接工程师，主要从事石油管材焊接工艺研究及质量监督检验。
收稿日期：2008－03－29
更新日期/Last Update: