[1]卢雪峰,石凯,周建宏,等.焊缝碾压形变热处理及其在连续管中的应用[J].焊管,2009,32(4):35-37.[doi:1001－3938（2009）04－0035－03]
　LU Xue-feng,SHI Kai,ZHOU Jian-hong,et al.Weld Thermomechanical Treatment with Roller Compaction and It’s Application in Coiled Tubing Manufacture[J].,2009,32(4):35-37.[doi:1001－3938（2009）04－0035－03]
点击复制

焊缝碾压形变热处理及其在连续管中的应用
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
32
期数:
2009年第4期
页码:
35-37
栏目:
应用与开发
出版日期:
2009-04-28

文章信息/Info

Title:
Weld Thermomechanical Treatment with Roller Compaction and  It’s Application in Coiled Tubing Manufacture
文章编号:
1001－3938（2009）04－0035－03
作者:
卢雪峰; 石凯; 周建宏; 李小影
（西安石油大学,西安 710065)
Author(s):
LU Xue-feng; SHI Kai; ZHOU Jian-hong; LI Xiao-ying
（Xi’an Shiyou University,Xi’an 710065,China）
关键词:
焊缝碾压形变热处理; 连续管; 金相组织; 力学性能
Keywords:
thermomechanical treatment with roller compaction of welding joints; coiled tubing; metallographic structure; mechanical properties
分类号:
TG111.7
DOI:
1001－3938（2009）04－0035－03
文献标志码:
B
摘要:
介绍了焊缝碾压形变热处理设备的一些基本情况，分析了碾压形变热处理的工艺及方法以及影响碾压形变热处理效果的主要因素。通过与常规未进行碾压形变热处理的焊板在金相组织和力学性能方面进行比较,显示采用合理的碾压形变热处理工艺可以有效地改善焊缝的金相组织及力学性能。
Abstract:
This paper introduces some basic information of welding joints thermomechanical treatment with roller compaction equipment,and analyzes the procedure and method of thermomechanical treatment with roller compaction,as well as the main factors in effect the results of thermomechanical treatment with roller compaction.Comparing the metallographic structure and mechanical properties of thermomechanical treatment with roller compaction with those that not undergoing thermomechanical treatment with roller compaction,it shows that adopting applicable thermomechanical treatment with roller compaction procedure can effectively improve metallographic structure and mechanical properties of welding joints.

参考文献/References:

［1］冯定,符达量.连续管作业机的应用及发展方向［J］.石油机械,1994,22(8):47-49.
［2］周志齐,陈玉祥.发展我国连续管作业技术［J］.石油科技论坛,1997（5）:14-17.
［3］崔忠圻.金属学与热处理［M］.北京：机械工业出版社,1989：209.
［4］范成磊,方洪渊,陶军,等.随焊冲击碾压减小应力变形防止热裂纹应变场分析［J］.焊接学报,2004,25(6):47-50.
［5］范成磊.随焊冲击碾压控制焊接应力变形新方法［J］.机械工程学报,2004（8）:87-90.
［6］范成磊.随焊冲击碾压控制焊接应力变形防止热裂纹机理［J］.清华大学学报(自然科学版）,2005（2):65-67.
［7］范成磊,方洪渊,陶军,等.随焊冲击碾压控制平面封闭焊缝残余变形研究［J］.哈尔滨工程大学学报,2005,26(2):238-239.
［8］赵征，李京龙.LY12CZ铝合金随焊锤击碾压工艺规范研究［J］.宇航材料工艺，2007（3）:50-54.

相似文献/References:

[1]毕宗岳,付宏强 编译.高强度连续管[J].焊管,2007,30(6):85.[doi:1001－3938（2007）06－0085－05]
　Edited and Translated by BI Zong-yue,FU Hong-qiang.High Strength Coiled Tubing[J].,2007,30(4):85.[doi:1001－3938（2007）06－0085－05]
[2]毕宗岳,张锦刚.连续管焊丝的试验研究[J].焊管,2008,31(1):26.[doi:1001－3938（2008）01－0026－03]
　BI Zong-yue,ZHANG Jin-gang.Testing & Research of Welding Wire Used for Coil Tubing[J].,2008,31(4):26.[doi:1001－3938（2008）01－0026－03]
[3]李霄,石凯,刘彦明,等.连续管焊接工艺及接头性能研究[J].焊管,2012,35(5):15.[doi:１００１－３９３８（２０１２）０5-0015-04]
　LI Xiao,SHI Kai,LIU Yan-ming,et al.Research on Coiled Tubing Butt Welding Process and Properties of Welded Joint[J].,2012,35(4):15.[doi:１００１－３９３８（２０１２）０5-0015-04]
[4]鲁明春,鲍海霞,陈为民,等.连续管水平井作业下入深度计算及应用[J].焊管,2014,37(7):31.[doi:１００１－３９３８（２０１4）07-0031-04]
　LU Mingchun,BAO Haixia,CHEN Weimin,et al.Running Depth Calculation and Application of Coiled Tubing（CT） Horizontal Well Operation[J].,2014,37(4):31.[doi:１００１－３９３８（２０１4）07-0031-04]
[5]鲁明春.水平井连续管存储式测井技术在涩北气田的试验应用[J].焊管,2014,37(11):27.[doi:１００１－３９３８（２０１4）11-0027-03]
　LU Mingchun.Test Application of Horizontal Coiled Tubing Store Type Logging Technology in China Sebei Gas Field[J].,2014,37(4):27.[doi:１００１－３９３８（２０１4）11-0027-03]
[6]付宏强,郜 飞.国内外连续管标准简介[J].焊管,2015,38(2):68.[doi:１００１－３９３８（２０１5）02-0068-05]
　FU Hongqiang,GAO Fei.Brief Introduction for Coiled Tubing (CT) Standard at Home and Abroad[J].,2015,38(4):68.[doi:１００１－３９３８（２０１5）02-0068-05]
[7]汪海涛,等.高强度CT100连续管力学性能研究[J].焊管,2016,39(4):1.[doi:10.19291/j.cnki.1001-3938.2016.04.001]
　WANG Haitao,YU Han,CHANG Yongle,et al.Mechanical Properties Research of High Strength CT100 Coiled Tubing[J].,2016,39(4):1.[doi:10.19291/j.cnki.1001-3938.2016.04.001]
[8]王维亮,等.连续管管-管对接自动焊技术研究[J].焊管,2016,39(12):9.[doi:10.19291/j.cnki.1001-3938.2016.12.003]
　WANG Weiliang,Yu Han,et al.Automatic Welding Technology Research on Coiled Tubing Butt Welding[J].,2016,39(4):9.[doi:10.19291/j.cnki.1001-3938.2016.12.003]
[9]毕宗岳,等.国产超高强度CT110连续管组织与性能[J].焊管,2017,40(3):24.[doi:10.19291/j.cnki.1001-3938.2017.03.006]
　BI Zongyue,XIAN Linyun,et al.Microstructure and Mechanical Properties of Domestic Ultra-high Strength?CT110 Grade Coiled Tubing[J].,2017,40(4):24.[doi:10.19291/j.cnki.1001-3938.2017.03.006]
[10]郭 峰.LG380Q连续管作业橇组的开发[J].焊管,2017,40(4):27.[doi:10.19291/j.cnki.1001-3938.2017.04.006]
　GUO Feng.Development of LG380Q Skid-mounted Coiled Tubing Unit[J].,2017,40(4):27.[doi:10.19291/j.cnki.1001-3938.2017.04.006]

备注/Memo

备注/Memo:
作者简介：卢雪峰（1983-），男，西安石油大学材料科学与工程学院材料加工工程专业在读硕士研究生。
收稿日期：2008－11－26
更新日期/Last Update: