参考文献/References:
[1]潘家华.油气管道断裂力学分析[M].北京:石油工业出版社,1989:108-133.
[2]LEVIN S I.Causes and Frequency of Failures on Gas Mains in the USSR[J].Pipes & Pipelines International,1993,91(30):9-13.
[3]王新虎. 某海底输油管道断裂分析[M].北京:石油工业出版社,2006:513-521.
[4]WILMOTT M J,SUTHERBY R L.Role of Pressure and Pressure Fluctuations in the Growth of Stress Corrosion Cracks in Line Pipe Steels[C]∥Proceeding of the 2nd International Pipeline Conference.Calgary:ASME,1998:409-422.
[5]BUSSIBA A,DARCIS P D,MCCOLSKEY J D,et al.Fatigue Crack Growth Rates in Six Pipeline Steels[C]∥Proceeding of the 6th International Pipeline Conference.Calgary:ASME,2007:475-484.
[6]刁顺,冯耀荣,庄传晶,等.几种油气输送管材料的疲劳特性与管道寿命预测[J].中国安全科学学报,2008,18(1):123-130.
[7]李亚平,焦中良,帅健.在役管道材料的低轴疲劳性能测试[J].实验室研究与探索,2007,26(11):196-198.
[8]ZHONG Yong,SHAN Yi-yin,XIAO Fu-ren,et al.Effect of Toughness on Low Cycle Fatigue Behavior of Pipeline Steels[J].Material Letters,2005,59(14):1780-1784.
[9]韩玉梅,韩恩厚,郑宇礼,等.X56管线钢的腐蚀疲劳寿命试验研究[J].机械强度,1994,16(1):77-79.
[10]张国君,潘志国,段占军,等.X60管线钢腐蚀疲劳裂纹扩展特性[J].石油化工腐蚀与防护,2001,18(1):53-55.
相似文献/References:
[1]管 伟,王国丽,马伟光,等.俄罗斯大直径管线钢管生产现状[J].焊管,2008,31(6):94.[doi:1001-3938(2008)06-0094-04]
GUAN Wei,WANG Guo-li,MA Wei-guang,et al.Production Current Status of Large Diameter Pipeline Steel in Russia[J].,2008,31(8):94.[doi:1001-3938(2008)06-0094-04]
[2]蔚长春.ANSI/API SPEC 5L《管线钢管规范》的理解和实施[J].焊管,2009,32(2):58.[doi:1001-3938(2009)02-0058-07]
YU Chang-chun.Understanding and Application of ANSI/API SPEC 5L for Line Pipe[J].,2009,32(8):58.[doi:1001-3938(2009)02-0058-07]
[3]孙宏.管线钢管理化性能试样截取与加工方法探讨[J].焊管,2009,32(8):55.[doi:1001-3938(2009)08-0055-04]
SUN Hong.Discussion on Sampling and Machining Methods of Physical and Chemical Properties for Linepipe Steel Pipe[J].,2009,32(8):55.[doi:1001-3938(2009)08-0055-04]
[4]陈宏远,吉玲康,谢文江,等.受初始几何缺陷影响的管线管非线性屈曲分析[J].焊管,2009,32(9):22.[doi:1001-3938(2009)09-0022-05]
CHEN Hong-yuan,JI Ling-kang,XIE Wen-jiang,et al.Analysis on Non-linear Buckling of Line Pipe with Geometrical Imperfection[J].,2009,32(8):22.[doi:1001-3938(2009)09-0022-05]
[5]田均平,康万平,赵红波.外焊坡口角度对X80级螺旋埋弧焊管焊缝质量的影响[J].焊管,2009,32(11):16.[doi:1001-3938(2009)11-0016-05]
TIAN Jun-ping,KANG Wan-ping,ZHAO Hong-bo.Effect of Outside Welding Groove Angle on Weld Quality of X80 Grade SSAW Pipe[J].,2009,32(8):16.[doi:1001-3938(2009)11-0016-05]
[6]陈宏达,申昭熙,董保胜,等.测试管线钢管屈服强度的试样选择[J].焊管,2010,33(7):11.[doi:1001-3938(2010)07-0011-06]
CHEN Hong-da,SHEN Zhao-xi,ONG Bao-sheng,et al.The Specimen Selection of Line Pipe for Testing Yield Strength[J].,2010,33(8):11.[doi:1001-3938(2010)07-0011-06]
[7]高惠临.管线钢管韧性的设计和预测[J].焊管,2010,33(12):5.[doi:1001-3938(2010)12-0005-08]
GAO Hui-lin.The Design and Calculation of Toughness for Pipelines[J].,2010,33(8):5.[doi:1001-3938(2010)12-0005-08]
[8]王晓香.焊接钢管技术的新进展[J].焊管,2011,34(3):5.[doi:1001-3938(2011)03-0005-07]
[9]杨专钊,李安强,杨溪,等.有关DWTT的管线钢产品标准和试验标准分析对比[J].焊管,2011,34(8):59.
[10]刘志军,张 歌,李 超,等.X120管线钢管的开发及其力学性能[J].焊管,2011,34(10):78.[doi:1001-3938(2011)10-0078-05]
Edited and Translated by LIU Zhi-jun,ZHANG Ge,LI Chao,et al.Development and Mechanical Properties of X120 Line Pipe[J].,2011,34(8):78.[doi:1001-3938(2011)10-0078-05]