[1]李霄,熊庆人,石凯,等.焊管残余应力研究进展及展望[J].焊管,2009,32(7):12-17.[doi:1001－3938（2009）07－0012－06]
　LI Xiao,XIONG Qing-ren,SHI Kai,et al.Research Progress and Prospect of Residual Stress in Welded Pipe[J].,2009,32(7):12-17.[doi:1001－3938（2009）07－0012－06]
点击复制

焊管残余应力研究进展及展望
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
32
期数:
2009年第7期
页码:
12-17
栏目:
试验与研究
出版日期:
2009-07-28

文章信息/Info

Title:
Research Progress and Prospect of Residual Stress in Welded Pipe
文章编号:
1001－3938（2009）07－0012－06
作者:
李霄1; 2; 熊庆人3; 石凯1; 刘彦明1; 李健1; 胥聪敏1; 张燕娜1
（1.西安石油大学 材料加工工程重点学科重点实验室 ，西安 710065；2.西安交通大学 材料学院，西安 710049；3.中国石油天然气集团公司管材研究所，西安 710065)
Author(s):
LI Xiao1; 2; XIONG Qing-ren3; SHI Kai1; LIU Yan-ming1; LI Jian1; XU Cong-min1; ZHANG Yan-na1
(1.Key Laboratary College of Material Science and Technology,Xi’an Shiyou University,Xi’an 710065,China；2. College of Material Science and Technology,Xi’an Jiaotong University,Xi’an 710049,China；3.Tubular Goods Research Center of CNPC,Xi’an 710065,China)
关键词:
焊管; 成型; 焊接; 残余应力; 水压试验; 扩径; 切环法
Keywords:
welded pipe; forming; welding; residual stress; hydrotest; expanding; slit-ring method
分类号:
TG404
DOI:
1001－3938（2009）07－0012－06
文献标志码:
A
摘要:
在焊管制造过程中需进行弯曲成型、焊接、水压、弯管、防腐等工艺过程，这些工艺过程造成的残余应力关系到焊管的服役寿命。介绍了焊管残余应力的研究方法、研究成果。指出，焊管的残余应力与其成型工艺关系重大，一般直缝焊管的残余应力水平低、分布均匀，螺旋焊管的残余应力水平高，且分布均匀性差。水压试验和扩径可以有效降低残余应力，但水压和扩径参数与残余应力的具体关系仍需要进行大量研究才能确定。最后指出，对切环法与磁测法的应用、螺旋焊管成型的精确模型、残余应力沿厚度方向的分布等问题仍需要进行深入研究。
Abstract:
During the manufacturing procedure,the pipe body was formed,welded,pressurized,bended and coated successively,and residual stress was induced into the pipe body which is closely related with the service life,and many researches are about it.In this paper the main residual stress studing methodes and main research results are reviewed.It has a very strong relationship between residual stess and forming process.The residual stress of general LSAW(Longitudinal Submerged Arc Welded) pipe is lower and more uniform than HSAW(Helical Submerged Arc Welded) pipe.Hydrotest and expanding process can effectively reduce residual stress,but the relationship among hydrotest pressure,expanding parameter and residual stress need to be defined through a lot of research.Meanwhile the application of ring-slit method and magnetic method,the model of HSAW pipe forming,the distribution along thickness of residual stress need to be studied deeply.

参考文献/References:

［1］罗建豪.无损残余应力测量技术及其新技术［J］.力学与实践,2003,25(4):7－11.
［2］NATHAN W.POERNER B S M E.An Investigation of Variability Among Residual Stress Measurement Techniques and Prediction of Machining Induced Distortion［D］.Texas:Texas Tech University,2007：16－17.
［3］KUDRYAVTSEV,KLEIMAN J.Ultrasonic Technique and Device for Residual Stress Measurement［C］∥Proceedings of the SEM Annual Conference on Theoretical.USA:Experimental and Computational Mechanics.Cincinnati,1999：467－473.
［4］RUSSELL D，BUTTLE D，MC CARTHY J.Online Monitoring of Absolute Stress Values in Pipelines［EB/OL］.http://www.ppsaonline.com/papers/2006-Aberdeen-5-Russell.pdf,2006-11-22/2009-7-5.
［5］HAYASHI M,ISHIWATA M,MORII Y,et al.Residual Stress Distribution in Carbon Steel Pipe Welded Joint Measured by Neutron Diffraction［J］.Mater Sci Res Int,2000,6(4):287-294.
［6］HAN Z W,LIU C,LU W P,et al.Experimental Investigation and Theoretical Analysis of Roll Forming of Electrical Resistance Welded Pipes［J］.Journal of Materials Processing Technology,2004,145(3):311－316.
［7］韩志武，刘才.有限条法模拟直缝焊管的成型过程［J］.金属学报,2000,36(11):1219－1222.
［8］丁锋,吴东晓.ERW焊管成型变形研究及有限元分析［J］.焊管,2007,30(2):23－26.
［9］TENY R W,ROY J P.Approximation of the Axial Strains Developed During the Roll Forming of ERW Pipe［J］.Journal of Materials Processing Technology,1990，22(1):29－44.
［10］KIUCH IM,WANG F Z.FEM Simulation of Roll Forming of ERW Pipes and Mill Process Design［C］∥Proceeding of NUM ISHEET’99.Besancon France:［s.n.］，1999:529－534.

相似文献/References:

[1]马海君.强力焊管的孔型设计[J].焊管,2007,30(4):56.[doi:1001－3938（2007）04－0056－02]
　MA Hai-jun.Pass Design of High-strength Welded Pipe[J].,2007,30(7):56.[doi:1001－3938（2007）04－0056－02]
[2]刘庆才,李 东,黎剑锋.影响输气管线钢管抗H2S性能主要因素的探讨[J].焊管,2007,30(5):54.[doi:1001－3938（2007）05－0054－05]
　LIU Qing-cai,LI Dong,LI Jian-feng.Key Factors Affecting Sour Service Ability of Welded Pipe and Its Domestic Production[J].,2007,30(7):54.[doi:1001－3938（2007）05－0054－05]
[3]刘继英,Albert Sedlmaier.异型钢管成型的计算机辅助设计[J].焊管,2008,31(2):53.[doi:1001－3938（2008）02－0053－02]
　LIU Ji-ying,Albert Sedlmaier.Computer Aided Design for Rollforming Shaped Tube[J].,2008,31(7):53.[doi:1001－3938（2008）02－0053－02]
[4]侯永利,曹文军.螺旋焊管成型缝“噘嘴”产生的原因及控制措施[J].焊管,2008,31(2):75.[doi:1001－3938（2008）02－0075－02]
　HOU Yong-li,CAO Wen-jun.Reason and Control Measure Occurred in Forming Weld? Protruding of Spiral Submerged Arc Welded Pipe[J].,2008,31(7):75.[doi:1001－3938（2008）02－0075－02]
[5]彭在美.我国焊接钢管的发展进入重要的战略转折期[J].焊管,2008,31(6):5.[doi:1001－3938（2008）06－0005－10]
　PENG Zai-mei.The Development of China Welded Pipe Steps into the Important Strategic Transition Period[J].,2008,31(7):5.[doi:1001－3938（2008）06－0005－10]
[6]宗 波,王树人,王铁民,等.国产X80级螺旋埋弧焊管的试制[J].焊管,2008,31(6):39.[doi:1001－3938（2008）06－0039〖KG－＊2〗－04]
　ZONG Bo,WANG Shu-ren,WANG Tie-min,et al.Trial Production of X80 Grade Helically Submerged Arc Welded Pipe in China[J].,2008,31(7):39.[doi:1001－3938（2008）06－0039〖KG－＊2〗－04]
[7]张 军.方矩形焊管成型质量分析[J].焊管,2009,32(1):46.[doi:1001－3938（2009）01－0046－02]
　ZHANG Jun.Forming Quality Analysis on Rectangular Welded Pipe[J].,2009,32(7):46.[doi:1001－3938（2009）01－0046－02]
[8]马 露 涛.φ720mm焊管平头机夹管装置设计[J].焊管,2009,32(9):47.[doi:1001－3938（2009）09－0047－03]
　MA Lu-tao.Design for φ720mm Welded Pipe Beveling Machine Clamp Pipe Device[J].,2009,32(7):47.[doi:1001－3938（2009）09－0047－03]
[9]耿开博.铝管、不锈钢管的高频感应焊接[J].焊管,2009,32(11):29.[doi:1001－3938（2009）11－0029－03]
　GENG Kai-bo.High-frequency Induction Welding of Aluminum and Stainless Steel Pipes[J].,2009,32(7):29.[doi:1001－3938（2009）11－0029－03]
[10]陈志翔,Jean Paul Boillot,Jeff Noruk.数字激光视觉技术在焊管生产中的应用[J].焊管,2010,33(2):29.[doi:1001－3938（2010）02－0029－04]
　CHEN Zhi-xiang,Jean Paul Boillot,Jeff Noruk.Application of Digital Laser Vision Technology in Welded Pipe Production[J].,2010,33(7):29.[doi:1001－3938（2010）02－0029－04]
[11]孙　宏　编译.具有塑性各向异性的高强度UOE钢管成型与屈曲仿真[J].焊管,2013,36(11):63.[doi:１００１－３９３８（２０１3）11-0063-08]
　Translated by SUN Hong.Forming and Buckling Simulation on High-strength UOE Pipe with Plastic Anisotropy[J].,2013,36(7):63.[doi:１００１－３９３８（２０１3）11-0063-08]
[12]陈浩明,毕宗岳,等.中碳钢HFW焊管成型焊接质量分析与改进[J].焊管,2019,42(9):56.[doi:10.19291/j.cnki.1001-3938.2019.9.011]
　CHEN Haoming,BI Zongyue,LU Yunfei,et al.Quality Analysis and Improvement of Medium Carbon Steel HFW Welded Pipe Forming and Welding[J].,2019,42(7):56.[doi:10.19291/j.cnki.1001-3938.2019.9.011]

备注/Memo

备注/Memo:
作者简介：李霄（1969-），女，副教授，主要从事焊接结构方面的教学与科研工作。
收稿日期：2009－03－26
更新日期/Last Update: