相似文献/References:
[1]田晨超,张骁勇,高惠临,等.工艺参数对X100热煨弯管组织和性能的影响[J].焊管,2012,35(4):15.[doi:1001－3938（2012）04－0015－05]
TIAN Chen-chao,ZHANG Xiao-yong,GAO Hui-lin,et al.Effects of Process Parameters on Microstructure and Properties of X100 Hot-bending Bends[J].,2012,35(4):15.[doi:1001－3938（2012）04－0015－05]
[2]张亚锋,杨社民,王耀光,等.Cu污染造成的感应加热弯管裂纹分析[J].焊管,2013,36(12):56.
ZHANG Yafeng,YANG Shemin,WANG Yaoguang,et al.Cracks Analysis of Induction Heating Bend Caused by Cu Contamination[J].,2013,36(4):56.
[3]田晨超,许 飞,焦 磊,等.加热温度对X80钢级热煨弯管组织性能的影响[J].焊管,2014,37(6):11.[doi:１００１－３９３８（２０１4）06-0011-06]
TIAN Chenchao,XU Fei,JIAO Lei,et al.Effects of Heating Temperature on Microstructures and Properties of X80 Grade Hot-bending Bends[J].,2014,37(4):11.[doi:１００１－３９３８（２０１4）06-0011-06]
[4]张海波,彭立山,白雷杰,等.X70钢级大径厚比热煨弯管制造工艺研究[J].焊管,2014,37(10):30.[doi:１００１－３９３８（２０１4）10-0030-04]
ZHANG Haibo,PENG Lishan,BAI Leijie,et al.Research on Manufacturing Technology for X70 Grade LargeDiameter-thickness Ratio Hot Bending Bends[J].,2014,37(4):30.[doi:１００１－３９３８（２０１4）10-0030-04]
[5]郭有田,等.全程加热与局部加热对X90高强钢热煨弯管组织及性能的影响[J].焊管,2016,39(6):10.[doi:10.19291/j.cnki.1001-3938.2016.06.003]
GUO Youtian,CHEN Zhongjun,et al.Influence of Entire Heating and Local Heating on Microstructure and Performance of X90 High Strength Steel Hot Bending Bends[J].,2016,39(4):10.[doi:10.19291/j.cnki.1001-3938.2016.06.003]
[6]何 莹.不同回火温度对X70管线钢管焊缝组织性能的影响[J].焊管,2017,40(5):36.[doi:10.19291/j.cnki.1001-3938.2017.05.007]
HE Ying,ZHANG Weifeng.Influence of Different Tempering Temperatures on X70 Line Pipe Weld Microstructure Performance[J].,2017,40(4):36.[doi:10.19291/j.cnki.1001-3938.2017.05.007]
[7]王俊华,张付峰,胡伟杰,等.热煨弯管拉伸试样尺寸的选择[J].焊管,2017,40(9):53.[doi:10.19291/j.cnki.1001-3938.2017.09.012]
WANG Junhua,ZHANG Fufeng,HU Weijie,et al.Dimension Selection of Hot Bended Pipe Tensile Specimen[J].,2017,40(4):53.[doi:10.19291/j.cnki.1001-3938.2017.09.012]
[8]郭有田,陈中均,赵向东,等.X80钢级Φ1 219 mm 弯管局部加热热模拟工艺性能研究[J].焊管,2018,41(8):14.[doi:10.19291/j.cnki.1001-3938.2018.08.002]
GUO Youtian,CHEN Zhongjun,ZHAO Xiangdong,et al.Process and Performance of Local Heating Thermal Simulation of X80 Grade Φ1 219 mm Elbow[J].,2018,41(4):14.[doi:10.19291/j.cnki.1001-3938.2018.08.002]
[9]嵇 峰,张婷婷,吕成秀,等.X80钢级Φ1 219 mm×33 mm/37.9 mm热煨弯管研制[J].焊管,2019,42(1):17.[doi:10.19291/j.cnki.1001-3938.2019.1.003]
JI Feng,ZHANG Tingting,LYU Chengxiu,et al.Development of X80 Φ1 219 mm×33 mm/37.9 mm Hot Induction Bend Pipe[J].,2019,42(4):17.[doi:10.19291/j.cnki.1001-3938.2019.1.003]
[10]韩银生,等.热煨弯管失效分析及预防措施[J].焊管,2019,42(12):45.[doi:10.19291/j.cnki.1001-3938.2019.12.009]
HAN Yinsheng,LU Weizhuo,et al.Failure Analysis and Preventive Measures of the Hot-bending Bend[J].,2019,42(4):45.[doi:10.19291/j.cnki.1001-3938.2019.12.009]