[1]傅如闻,李 蔚.回火温度对X60热煨弯管外弧侧性能及组织的影响[J].焊管,2011,34(7):59-62.
点击复制

回火温度对X60热煨弯管外弧侧性能及组织的影响
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
34
期数:
2011年第7期
页码:
59-62
栏目:
经验交流
出版日期:
2011-07-28

文章信息/Info

Title:
Effect of tempering temperature and property of X60
作者:
傅如闻 李  蔚
关键词:
感应加热弯管回火温度抗形变能力
摘要:
采用力学性能检测及金相分析技术,研究了不同回火温度对实际生产的X60感应加热弯管外弧侧母材横向力学性能及微观组织的影响规律。试验结果表明:在X60感应加热弯管的生产中,采用 500~550 ℃回火处理时,弯管的力学性能最佳,但与弯制前的直缝埋弧焊管相比,弯管的抗形变能力变差;采用650 ℃回火处理时,弯管外弧侧母材的屈强比大于0.93,已不适宜用作油气输送管线管。

参考文献/References:

[1] SY/T 5257—2004,油气输送用钢制弯管[S].
[2] 《热处理手册》编委会.热处理手册(第1卷) :工艺基础[M].3版.北京:机械工业出版社,2002.
[3] GB/T 9452—2003,热处理炉有效加热区间测定方法[S].
[4] API SPEC 5L(44版),管线钢管规范[S].
[5] 石川信行,远藤茂,村罔隆二.Effect of Microstructureal Characteristics on Deformability of High Stength Linepipe Steel [J].CAMPISIJ,2004(17):314-317.
[6] 李鹤林.高强度微合金管线钢显微组织分析与鉴别图谱[M]. 北京:石油工业出版社,2001.

相似文献/References:

[1]王晓香,李延丰,付彦宏,等.X80管线钢管和感应加热弯管的开发[J].焊管,2009,32(5):28.[doi:1001-3938(2009)05-0028-03]
 WANG Xiao-xiang,LI Yan-feng,FU Yan-hong,et al.Development of X80 Grade Pipeline Steel Pipe and Induction Heating Bend[J].,2009,32(7):28.[doi:1001-3938(2009)05-0028-03]
[2]王晓香,李延丰,付彦宏,等.X80管线钢管和感应加热弯管的开发[J].焊管,2009,32(6):30.[doi:1001-3938(2009)06-0030-06]
 WANG Xiao-xiang,LI Yan-feng,FU Yan-hong,et al.Development of X80 Grade Pipeline Steel Pipe and Induction Heating Bend[J].,2009,32(7):30.[doi:1001-3938(2009)06-0030-06]
[3]李立科,郑茂盛,孙利军,等.热处理对X80管线钢组织性能的影响[J].焊管,2010,33(4):18.[doi:1001-3938(2010)04-0018-04]
 LI Li-ke,ZHENG Mao-sheng,SUN Li-jun,et al.The Influence of Heat Treatment on Microstructure Properties of X80 Pipeline Steel[J].,2010,33(7):18.[doi:1001-3938(2010)04-0018-04]
[4]牛靖,刘迎来,张骁勇,等.X80钢的热处理组织和性能研究[J].焊管,2011,34(6):14.[doi:1001-3938(2011)06-0014-06]
 NIU Jing,LIU Ying-lai,ZHANG Xiao-yong,et al.Study on heat treatment microstructure and mechanical properties of pipeline steel X80[J].,2011,34(7):14.[doi:1001-3938(2011)06-0014-06]
[5]李继红,孟 强,支金花,等.回火温度对马氏体不锈钢1Cr13焊接接头耐腐蚀性能的影响[J].焊管,2012,35(10):20.[doi:1001-3938(2012)10-0020-05]
 LI Jihong,MENG Qiang,ZHI Jinhua,et al.Effect of Tempering temperature on Corrosion Restistance of Martensite Stainless Steel 1Cr13 Welded Joints[J].,2012,35(7):20.[doi:1001-3938(2012)10-0020-05]
[6]杨玮玮,彭立山,李国鹏,等.感应加热弯管热处理前后热影响区组织和性能的变化[J].焊管,2015,38(6):58.[doi:1001-3938(2015)06-0058-05]
 YANG Weiwei,PENG Lishan,LI Guopeng,et al.The Change of Heat Affected Zone(HAZ) Microstructure and Performance of Induction Heating Bend Pipes Before and After Heat Treatment[J].,2015,38(7):58.[doi:1001-3938(2015)06-0058-05]
[7]何 莹.不同回火温度对X70管线钢管焊缝组织性能的影响[J].焊管,2017,40(5):36.[doi:10.19291/j.cnki.1001-3938.2017.05.007]
 HE Ying,ZHANG Weifeng.Influence of Different Tempering Temperatures on X70 Line Pipe Weld Microstructure Performance[J].,2017,40(7):36.[doi:10.19291/j.cnki.1001-3938.2017.05.007]
[8]尹文明,雷 庆,赵志伟,等.土耳其TANAP工程用感应加热弯管制造标准及技术难点[J].焊管,2017,40(8):61.[doi:10.19291/j.cnki.1001-3938.2017.08.013]
 YIN Wenming,LEI Qing,ZHAO Zhiwei,et al.Induction Heated Bending Pipe Manufacture Standard and Technical Difficulties Used for Turkey TANAP Engineering[J].,2017,40(7):61.[doi:10.19291/j.cnki.1001-3938.2017.08.013]
[9]罗华权,张丽娜,仝 珂,等.感应加热弯管屈服强度和抗拉强度偏低原因分析[J].焊管,2017,40(11):37.[doi:10.19291/j.cnki.1001-3938.2017.11.008]
 LUO Huaquan,ZHANG Lina,TONG Ke,et al.Cause Analysis of Low Yield Strength and Tensile Strength of Induction Heating Elbow[J].,2017,40(7):37.[doi:10.19291/j.cnki.1001-3938.2017.11.008]

备注/Memo

备注/Memo:
作者简介:傅如闻(1973—),男,工学硕士,现从事特种设备监督检验及研究工作。
更新日期/Last Update: