相似文献/References:
[1]乔桂英,王 旭,付彦宏,等.加热温度和冷却速度对X80级弯管用钢组织与性能的影响[J].焊管,2008,31(6):15.[doi:1001－3938（2008）06－0015－04]
QIAO Gui-ying,WANG Xu,FU Yan-hong,et al.Effects of Heat Temperature and Cooling Rate on Microstructure and Mechanical Properties of X80 Steel[J].,2008,31(9):15.[doi:1001－3938（2008）06－0015－04]
[2]孔君华,郑 琳,关 云,等.西气东输二线工程用18.4 mm厚 X80级热轧板卷生产实践[J].焊管,2008,31(6):50.[doi:1001－3938（2008）06－0050－04]
KONG Jun-hua,ZHENG Ling,GUAN Yun,et al.Production Experience of X80 Grade Hot Rolled Coil with 18.4 mm Thickness Used〖JZ〗for the Second West to East Gas Pipeline Project[J].,2008,31(9):50.[doi:1001－3938（2008）06－0050－04]
[3]黄国建,张英慧,孔祥磊,等.特厚规格X70和X80级热轧卷板的开发与应用[J].焊管,2009,32(2):17.[doi:1001－3938（2009）02－0017-06]
HUANG Guo-jian,ZHANG Ying-hui,KONG Xiang-lei,et al.Development and Application of X70 & X80 Grade HRC with Heavy Thickness[J].,2009,32(9):17.[doi:1001－3938（2009）02－0017-06]
[4]孙 奇,赵 波 编译.高应变时效抗力X80管线钢显微组织和力学性能[J].焊管,2011,34(8):63.
[5]赵志伟,高振宇,付彦宏,等.西气东输二线工程用X80级φ1 219 mm感应加热弯管的研发[J].焊管,2012,35(2):5.[doi:１００１－３９３８（２０１２）０２-0005-05]
ZHAO Zhi-wei,GAO Zhen-yu,FU Yan-hong,et al.The Development of X80 Grade φ1 219 mm Hot Induction Bend Used to the 2nd West-east Gas Pipeline Project[J].,2012,35(9):5.[doi:１００１－３９３８（２０１２）０２-0005-05]
[6]章传国,郑磊,张备,等.X80 大口径UOE焊管的开发和应用[J].焊管,2012,35(12):19.[doi:１００１－３９３８（２０１２）12-0019-06]
ZHENG Lei,ZHANG Chuanguo,ZHANG Bei,et al.Development and Application of X80 Large Diameter UOE Pipe[J].,2012,35(9):19.[doi:１００１－３９３８（２０１２）12-0019-06]
[7]王泽恒,马国光,王艳华,等.基于BS 7910标准含埋藏裂纹缺陷X80长输管线的二级安全评定[J].焊管,2013,36(4):61.[doi:１００１－３９３８（２０１3）04-0061-05]
WANG Zeheng,MA Guoguang,WANG Yanhua,et al.Level 2 Safety Assessment for X80 Long-distance Transportation Pipeline with Embedded Crack Based on BS 7910 Standard[J].,2013,36(9):61.[doi:１００１－３９３８（２０１3）04-0061-05]
[8]马小芳 编译.GMAW焊接的HTP高铌X80管线钢管的纵向应变容量[J].焊管,2013,36(11):75.[doi:１００１－３９３８（２０１3）11-0075-06]
Edited and Translated by MA Xiaofang.Longitudinal Strain Capacity of GMAW Welded High Niobium (HTP) Grade X80 Steel Pipes[J].,2013,36(9):75.[doi:１００１－３９３８（２０１3）11-0075-06]
[9]刘迎来,吴 宏,井懿平,等.高强度油气输送管道三通验证试验研究[J].焊管,2014,37(3):28.[doi:１００１－３９３８（２０１4）03-0028-06]
LIU Yinglai,WU Hong,JING Yiping,et al.Study on the Validation Test of Tee for High Strength Oil and Gas Pipeline[J].,2014,37(9):28.[doi:１００１－３９３８（２０１4）03-0028-06]
[10]李建一,王 旭,孙灵丽,等.X80钢级热轧板卷及螺旋焊管拉伸性能统计分析[J].焊管,2014,37(3):55.[doi:１００１－３９３８（２０１4）03-0055-05]
LI Jianyi,WANG Xu,SUN Lingli,et al.Statistic Analysis on Tensile Property of X80 Grade Hot Rolled Coil and SAWH Steel Pipe[J].,2014,37(9):55.[doi:１００１－３９３８（２０１4）03-0055-05]