[1]王长安,余国民,魏雅博.平板DR数字成像技术在焊管行业中的应用[J].焊管,2014,37(12):52-55.[doi:1001-3938(2014)12-0052-04]
 WANG Changan,YU Guomin,et al.Application of Flat Panel Digital Radiography Imaging Technology in Welded Pipe Industry[J].,2014,37(12):52-55.[doi:1001-3938(2014)12-0052-04]
点击复制

平板DR数字成像技术在焊管行业中的应用
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
37
期数:
2014年第12期
页码:
52-55
栏目:
工艺与设备
出版日期:
2014-12-28

文章信息/Info

Title:
Application of Flat Panel Digital Radiography Imaging Technology
 in Welded Pipe Industry
文章编号:
1001-3938(2014)12-0052-04
作者:
王长安12余国民12魏雅博3 
(1.中国石油集团石油管工程技术研究院,西安 710077;
2.北京隆盛泰科石油管科技有限公司,北京 100101;
3.上海海隆防腐技术工程有限公司,上海 200941)
Author(s):
WANG Changan1 2 YU Guomin1 2 WEI Yabo3
(1. CNPC Tubular Goods Research Institute, Xi’an 710077, China;
2. Beijing Longshine Oil Tubular Technology Co., Ltd., Beijing 100101,China;
3. Shanghai Hilong Anti-corrosion Technology Engineering Co., Ltd., Shanghai 200941, China)
关键词:
焊管DR成像X射线灵敏度
Keywords:
welded pipe DR imaging X-ray sensitivity
分类号:
TE973.6
DOI:
1001-3938(2014)12-0052-04
文献标志码:
B
摘要:
介绍了DR数字成像技术的工作原理及其在焊管行业检测中的应用。在灵敏度检测、 图像分辨率、剩磁影响和辐射剂量等方面与传统的X射线工业电视的检测效果进行了比较分析。结果表明, DR数字成像技术具有检测灵敏度和检测效率较高、劳动强度小、辐射剂量小等优点, 保证了焊缝质量, 大大降低了管线的事故发生率, 可以替代传统X射线工业电视检测技术在焊管行业的应用。
Abstract:
In this article, it introduced the working principle of digital radiography(DR) imaging technology and its application in welded pipe industry. Compared with the detection effect of traditional X-ray industrial TV from sensitivity detection, image resolution, residual magnetization, radiation dose etc. The result showed that the flat panel DR imaging technology is with some advantages, such as high sensitivity of detection, high efficiency, low labour tension, little doses of radiation and so on. It ensures the weld quality, greatly reduces the accident rate of pipeline, and can replace X-ray industrial TV detecting technology. At present, this technology is widely applied in welded pipe industry.

参考文献/References:

[1]刘云,余光俊. 螺旋埋弧焊管X射线探伤图像扭曲的磁校正[J]. 焊管,2006(02):59-60.
[2]孔凡琴,路宏年.采用数字射线DR成像的焊接质量检测[J].无损检测,2008,30(01):20-22.
[3]夏纪真. CR和DR成像技术[J]. 无损探伤, 2007, 31 (01):4-6.
[4]陈树年,路宏年.数字式X射线成像无损检测技术[J]. 华北工学院学报,1999,20(01):50-51.
[5]韩焱.射线数字成像检测技术[J]. 无损检测, 2003, 25(09) :468-469.
[6]陈树越.改进射线数字成像系统的图像质量[J] . 测试技术学报,2001,15(03):163-165.
[7]唐彦林, 丁晓军, 王化松.线扫描DR数字成像技术在螺旋埋弧焊管检测中的应用[J].焊管, 2006, 29 (03):38-39.
[8]张金光,张健.DR数字成像系统在大口径长输管道施工中的应用[J]. 无损探伤, 2012, 36(04):17-18.
[9]李衍.承压设备焊缝CR和DR技术应用最新国际动态[J].无损探伤,2009, 33(04):3-5.
[10] 孔凡琴,路宏年.基于数字射线成像的航空发动机涡轮叶片缺陷尺寸的自动测定[J]. 兵工学报, 2005, 26(03):335-337.

相似文献/References:

[1]马海君.强力焊管的孔型设计[J].焊管,2007,30(4):56.[doi:1001-3938(2007)04-0056-02]
 MA Hai-jun.Pass Design of High-strength Welded Pipe[J].,2007,30(12):56.[doi:1001-3938(2007)04-0056-02]
[2]刘庆才,李 东,黎剑锋.影响输气管线钢管抗H2S性能主要因素的探讨[J].焊管,2007,30(5):54.[doi:1001-3938(2007)05-0054-05]
 LIU Qing-cai,LI Dong,LI Jian-feng.Key Factors Affecting Sour Service Ability of Welded Pipe and Its Domestic Production[J].,2007,30(12):54.[doi:1001-3938(2007)05-0054-05]
[3]彭在美.我国焊接钢管的发展进入重要的战略转折期[J].焊管,2008,31(6):5.[doi:1001-3938(2008)06-0005-10]
 PENG Zai-mei.The Development of China Welded Pipe Steps into the Important Strategic Transition Period[J].,2008,31(12):5.[doi:1001-3938(2008)06-0005-10]
[4]李霄,熊庆人,石凯,等.焊管残余应力研究进展及展望[J].焊管,2009,32(7):12.[doi:1001-3938(2009)07-0012-06]
 LI Xiao,XIONG Qing-ren,SHI Kai,et al.Research Progress and Prospect of Residual Stress in Welded Pipe[J].,2009,32(12):12.[doi:1001-3938(2009)07-0012-06]
[5]马 露 涛.φ720mm焊管平头机夹管装置设计[J].焊管,2009,32(9):47.[doi:1001-3938(2009)09-0047-03]
 MA Lu-tao.Design for φ720mm Welded Pipe Beveling Machine Clamp Pipe Device[J].,2009,32(12):47.[doi:1001-3938(2009)09-0047-03]
[6]耿开博.铝管、不锈钢管的高频感应焊接[J].焊管,2009,32(11):29.[doi:1001-3938(2009)11-0029-03]
 GENG Kai-bo.High-frequency Induction Welding of Aluminum and Stainless Steel Pipes[J].,2009,32(12):29.[doi:1001-3938(2009)11-0029-03]
[7]陈志翔,Jean Paul Boillot,Jeff Noruk.数字激光视觉技术在焊管生产中的应用[J].焊管,2010,33(2):29.[doi:1001-3938(2010)02-0029-04]
 CHEN Zhi-xiang,Jean Paul Boillot,Jeff Noruk.Application of Digital Laser Vision Technology in Welded Pipe Production[J].,2010,33(12):29.[doi:1001-3938(2010)02-0029-04]
[8]黄克坚,苏章卓,甘遂谋,等.焊管机械扩径力的计算[J].焊管,2010,33(12):13.[doi:1001-3938(2010)12-0023-04]
[9]吴庆根.高频焊管生产中管体温度不均造成弯管的防止措施[J].焊管,2011,34(1):51.[doi:1001-3938(2011)01-0051-03]
[10]王晓香.坚持结构调整和科技进步继续向焊管强国迈进[J].焊管,2011,34(2):5.[doi:1001-3938(2011)02-0005-05]
 WANG Xiao-xiang.Go Ahead to the Target of Welded Pipe Powerful Nation by Insisting in Structural Adjustment and Technical Promotion[J].,2011,34(12):5.[doi:1001-3938(2011)02-0005-05]
[11]巨西民,巨 佳,李晓敏,等.埋弧焊管焊缝DR检测灵敏度的研究[J].焊管,2013,36(10):60.[doi:1001-3938(2013)10-0060-04]
 JU Ximin,JU Jia,LI Xiaomin,et al.Study the Sensitivity of Digital Radiography(DR) Testing for Weldseam of Submerged Arc Welded Pipe[J].,2013,36(12):60.[doi:1001-3938(2013)10-0060-04]

备注/Memo

备注/Memo:
收稿日期:2014-11-17
作者简介:王长安(1966—),男,高级工程师,长期从事油气输送管驻厂监造与技术服务工作,现任北京隆盛石油管科技有限公司副总经理。
更新日期/Last Update: