[1]钱立峰,梁孟轩.TOFD偏置非平行扫查缺陷检出的有效性[J].焊管,2015,38(12):55-57.[doi:1001-3938(2015)12-0055-03]
 QIAN Lifeng,LIANG Mengxuan.Research on the Test Effectiveness of TOFD Offset-scan for Defects[J].,2015,38(12):55-57.[doi:1001-3938(2015)12-0055-03]
点击复制

TOFD偏置非平行扫查缺陷检出的有效性
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
38
期数:
2015年第12期
页码:
55-57
栏目:
经验交流
出版日期:
2015-12-28

文章信息/Info

Title:
Research on the Test Effectiveness of TOFD Offset-scan for Defects
文章编号:
1001-3938(2015)12-0055-03
作者:
钱立峰1梁孟轩2
(1. 海油发展安全环保分公司 工程监理公司, 天津 300345;
 2. 西安科技大学, 西安710054)
Author(s):
QIAN Lifeng1 LIANG Mengxuan2
(1. CNOOC Energy Technology & Services QHSE Branch Company Project Supervision Company, Tianjin 300345, China;
2. Xi’an University of Science and Technology, Xi’an 710054, China)
关键词:
无损检测TOFD偏置非平行扫查对比试块常规超声检测
Keywords:
nondestructive testing TOFD offset-scan reference block conventional ultrasound testing
分类号:
TG441.7
DOI:
1001-3938(2015)12-0055-03
文献标志码:
B
摘要:
为研究TOFD偏置非平行扫查对缺陷检出的有效性,制作了圆锥孔深分别为5 mm,8 mm,13 mm,20 mm和25 mm的人工缺陷对比试块,并在试块上进行了TOFD偏置非平行扫查检测。检测图谱分析结果表明,移除底波后,TOFD偏置非平行扫查可以对所有圆锥孔有效检出,但缺陷深度超过8 mm时,深度测量误差迅速增大。针对现场的TOFD偏置非平行扫查检测,当测量缺陷深度超过8 mm时,应辅以常规超声检测对缺陷进行定位。
Abstract:
In order to study the detection efficiency of the TOFD off-scan mode, the reference block with different depth conical holes as 5 mm, 8 mm, 13 mm, 20 mm, 25 mm were processed. TOFD offset-scan was implemented on the block and the tested graph was studied. The test result showed that the holes can be detected efficiently after the bottom wave removed. But the depth measurement deviation increase rapidly when the actual depth greater than 8 mm.The normal ultrasonic testing should be used to determine the defect depth for on-site TOFD offset-scan detecting.

参考文献/References:

[1]余国民. 超声TOFD法在无损检测领域中的应用[J].焊管,2007,30(6): 39-40.
[2]袁涛,曹怀详. TOFD超声成像检测技术在压力容器检验中的应用[J]. 压力容器,2008,25(2): 58-60.
[3]汪明辉,肖爱武. TOFD方法对焊接缺陷的检测能力[J]. 无损检测,2014,36(7):75-78.
[4]伊新. TOFD检测技术基本原理及其应用探讨[J]. 中国化工装备,2008(2):109-111.
[5]胡先龙,季昌国. 衍射时差法超声波检测[M]. 北京:中国电力出版社,2015:95-97.
[6]NB/T 47013.10—2015,承压设备无损检测 第10部分:衍射时差法超声检测[S].
[7]伍卫平,范钦红. TOFD检测中轴偏离缺陷方位参数的测量误差[J]. 无损检测,2014,28(9): 28-33.
[8]林乃昌,杨晓翔. 基于抛物线拟合的TOFD图像缺陷检测[J]. 焊接学报,2014,35(6): 35-39.
[9]刘卫海. 石油管道焊缝TOFD检测的缺陷分析及优化[J]. 文摘版:工程技术,2015(22): 256-256.
[10] 薛永盛,李玉军. TOFD检测上表面盲区的讨论[J]. 无损检测,2014,38(4): 20-25.

相似文献/References:

[1]张树鹏,赵文生.X射线实时成像系统在压力容器无损检测中的应用[J].焊管,2007,30(6):45.[doi:1001-3938(2007)06-0045-03]
 ZHANG Shu-peng,ZHAO Wen-sheng.Research and Application of the Real-time Imagery System in Nondestructive Detection for the Pressure Vessel[J].,2007,30(12):45.[doi:1001-3938(2007)06-0045-03]
[2]杜波夫 阿 阿,考罗考利尼柯夫С.М..焊接缺陷的金属磁记忆法检测[J].焊管,2008,31(2):44.[doi:1001-3938(2008)02-0044-05]
 A.A.Dubov,S.M.Kolokolnikov.Inspection of Welding Defects with Metal Magnetic Memory Metho[J].,2008,31(12):44.[doi:1001-3938(2008)02-0044-05]
[3]杨专钊,田伟,李云龙,等.卷板制造JCOE直缝埋弧焊接钢管质量分析[J].焊管,2009,32(5):31.[doi:1001-3938(2009)05-0031-05]
 YANG Zhuan-zhao,TIAN Wei,LI Yun-long,et al.Quality Analysis on JCOE Longitudinal Submerged Arc Welded Pipe Made from Rolling Plate[J].,2009,32(12):31.[doi:1001-3938(2009)05-0031-05]
[4]齐向前.TOFD在P92钢检测中的应用[J].焊管,2009,32(12):57.[doi:1001-3938(2009)12-0057-04]
 QI Xiang-qian.Application of Time of Flight Diffraction(TOFD) Technology in the Inspection of P92 Steel[J].,2009,32(12):57.[doi:1001-3938(2009)12-0057-04]
[5]王自信,张圣光,蒋太秋,等.不同管线钢管标准对无损检测要求的差异分析[J].焊管,2012,35(7):63.[doi:1001-3938(2012)07-0063-05]
 WANG Zi-xin,ZHANG Sheng-guang,JIANG Tai-qiu,et al.Analysis on Similarities and Differences of NDT Requirements in Different Line Pipe Standards[J].,2012,35(12):63.[doi:1001-3938(2012)07-0063-05]
[6]孟庆军,唐彦林,任 勇,等.直缝埋弧焊钢管焊缝附近母材缺欠的无损检测[J].焊管,2014,37(1):32.[doi:1001-3938(2014)01-0032-05]
 MENG Qingjun,TANG Yanlin,REN Yong,et al.Non-destructive Testing of Base Metal Imperfections Adjacent to SAWL Pipe Weld[J].,2014,37(12):32.[doi:1001-3938(2014)01-0032-05]
[7]刘 欣.X射线探臂升降装置及射线检测室的设计改造[J].焊管,2014,37(1):50.[doi:1001-3938(2014)01-0050-03]
 LIU Xin.Design Modification of X-ray Lifting Device and the Ray Testing Room[J].,2014,37(12):50.[doi:1001-3938(2014)01-0050-03]
[8]林春明,杨伟芳,钱利雄,等.《不锈钢复合焊接钢管》Q/JZS 16—2012企标中焊缝无损检测方法的首选[J].焊管,2014,37(3):64.[doi:1001-3938(2014)03-0064-04]
 LIN Chunming,YANG Weifang,QIAN Lixiong,et al.Preferred Method of Weld NDT in Enterprise Standard Q/JZS 16—2012 Composite Stainless Steel Welded Pipe[J].,2014,37(12):64.[doi:1001-3938(2014)03-0064-04]
[9]张辉宇,谢建桥.影响LNG储罐无损检测准确性的因素分析[J].焊管,2015,38(5):50.[doi:1001-3938(2015)05-0050-04]
 ZHANG Huiyu,XIE Jianqiao.Analysis on the Factors of Affecting NDT Accuracy to LNG Store Tank[J].,2015,38(12):50.[doi:1001-3938(2015)05-0050-04]
[10]陈青山,崔二炜,陈晓雯,等.X射线工业电视检测系统灵敏度的影响因素及系统优化[J].焊管,2016,39(1):53.[doi:10.19291/j.cnki.1001-3938.2016.01.012]
 CHEN Qingshan,CUI Erwei,CHEN Xiaowen,et al.Influence Factors of X-ray Industrial TV Inspection System Sensitivity and System Optimization[J].,2016,39(12):53.[doi:10.19291/j.cnki.1001-3938.2016.01.012]

备注/Memo

备注/Memo:
收稿日期:2015-08-24
修改稿收稿日期:2015-10-30
作者简介:钱立峰(1973—), 男,天津塘沽人,石油大学石油工程研究生毕业,高级工程师,主要从事项目管理及工程质量控制研究。
更新日期/Last Update: