[1]周书亮,李 斌,陈 楠,等.螺旋焊管板宽自动测量装置的设计应用[J].焊管,2017,40(3):37-40.[doi:10.19291/j.cnki.1001-3938.2017.03.009]
 ZHOU Shuliang,LI Bin,CHEN Nan,et al.Design and Application of the Automatic Measure Device to SAWH Pipe Plate Width[J].,2017,40(3):37-40.[doi:10.19291/j.cnki.1001-3938.2017.03.009]
点击复制

螺旋焊管板宽自动测量装置的设计应用
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
40
期数:
2017年第3期
页码:
37-40
栏目:
应用与开发
出版日期:
2017-03-28

文章信息/Info

Title:
Design and Application of the Automatic Measure Device to
SAWH Pipe Plate Width
文章编号:
10.19291/j.cnki.1001-3938.2017.03.009
作者:
周书亮1李 斌1陈 楠1孙志刚1王科峰1万世平1马毅男2
1. 渤海装备华油钢管公司, 河北 青县 062658;
2. 渤海能克钻杆有限公司, 河北 青县 062658
Author(s):
ZHOU Shuliang1 LI Bin1 CHEN Nan1 SUN Zhigang1 WANG Kefeng1 WAN Shiping1 MA Yinan2
1. CNPC Bohai Equipment North China Petroleum Steel Pipe Co., Ltd., Qingxian 062658, Hebei, China;
2. CNPC Bohai Equipment BHNK Co., Ltd., Qingxian 062658, Hebei, China
关键词:
螺旋焊管铣边板宽自动测量模拟量组态触摸屏
Keywords:
SAWH pip edge milling plate width automatic measurement analog quantity configuration touch screen
分类号:
TE973.6
DOI:
10.19291/j.cnki.1001-3938.2017.03.009
文献标志码:
B
摘要:
为提高螺旋焊管板宽测量的准确性和精度,降低岗位人员劳动强度,消除测量过程中的安全隐患,针对生产中铣边后钢板宽度采用手动测量的现状,设计了一套板宽自动测量装置。该装置通过基恩士激光位移传感器IG28检测钢板两侧板边位置,采用西门子SM331模拟量模块将检测信号采集到PLC主站中,PLC程序对这些信号进行逻辑判断,从而计算出钢板的实时宽度。利用Wincc Flexible组态软件对钢板的实时宽度进行显示,并设置每种规格钢板宽度的上限、下限值,超限时给予报警提示,在触摸屏上显示出来。实际应用表明,该系统运行稳定,测量数据准确,测量误差在±0.5 mm。
Abstract:
In order to improve the accuracy and precision of spiral welded pipe plate width measurement, reduce staff labor intensity, eliminate the potential safety hazard in the process of measurement, aiming at the current status of manual measuring steel plate width after edge milling in production, a set of plate width automatic measurement device was designed. The device detected the edge position of steel plate both sides by adopting IG28 keyence laser displacement sensor, using Siemens SM331 analog module to acquire the signal to the PLC master station, the PLC program conducted logical judgment for these signals, and calculated the real-time width of steel plate. The Wincc Flexible configuration software was used to display the real-time width of steel plate, set the upper limit and lower limit of each type of steel plate width, an alarm will be given and be displayed on the touch screen if the setting is ultralimit. The actual use showed that this device runs stably, measurement data is accurate, and the measurement deviation is within ±0.5 mm.

参考文献/References:

[1] 高惠临.管线钢与管线钢管[M]. 北京:中国石化出版社,2012.
[2] 魏克新.自动控制综合应用技术[M]. 北京:化学工业出版社,2012.
[3] 梁涛,杨彬,岳大为. Profibus现场总线控制系统的设计与开发[M]. 北京:国防工业出版社,2013.
[4] 廖常初. S7-300/400 PLC应用技术[M]. 北京:机械工业出版社,2012.
[5] 向晓汉,苏高峰. 西门子PLC工业通信完全精通教程 [M]. 北京:化学工业出版社,2013.
[6] 童敏明,唐守峰,董海波. 传感器原理与检测技术[M]. 北京:机械工业出版社,2014.
[7] 马明建. 数据采集与处理技术[M]. 西安:西安交通大学出版社,2012.
[8] 濮良贵,陈国定,吴立言. 机械设计[M]. 北京:高等教育出版社,2013.
[9] 吴晓明.现代气动元件与系统[M]. 北京:化学工业出版社,2014.
[10] 王建. 触摸屏实用技术[M]. 北京:机械工业出版社,2012.
[11] 周志敏. 西门子人机界面工程应用与故障检修实例[M].北京:机械工业出版社,2016.

相似文献/References:

[1]林三宝,秦克礼,ZHAO Jing,等.基于激光视觉的螺旋焊管内外焊焊缝跟踪系统[J].焊管,2007,30(4):41.[doi:1001-3938(2007)04-0041-03]
 LIN San-bao,QIN Ke-li,ZHAO Jing,et al.Laser Vision Based Seam Tracking System for ID&OD Spiral Pipe Mill[J].,2007,30(3):41.[doi:1001-3938(2007)04-0041-03]
[2]刘 云,彭春明,刘德应.螺旋焊管内焊双丝焊装置的设计与应用[J].焊管,2007,30(4):51.[doi:1001-3938(2007)04-0051-03]
 LIU Yun,PENG Chun-ming,LIU De-ying.Design and Application of Inside Welding Double Wires Welding Unit for Spiral Submerged Arc Welding Pipe[J].,2007,30(3):51.[doi:1001-3938(2007)04-0051-03]
[3]宗 波,刘 新,杨万霞.VistaWeld焊缝自动跟踪系统在螺旋焊管生产中的应用[J].焊管,2007,30(4):58.[doi:1001-3938(2007)04-0058-03]
 ZONG Bo,LIU xin,YANG Wan-xia.Application of“Vista Weld”Weld Automatic Tracking System in the Production of Spiral Submerged Arc Welded Pipe[J].,2007,30(3):58.[doi:1001-3938(2007)04-0058-03]
[4]刘洪飞.螺旋焊管带钢边缘铣削形状与焊接工艺的匹配[J].焊管,2007,30(4):61.[doi:1001-3938(2007)04-0061-05]
 LIU Hong-fei.Matching of Welding Process with Milling Shape of Strip Edges for Spiral Submerged Arc Welded Pipe[J].,2007,30(3):61.[doi:1001-3938(2007)04-0061-05]
[5]吴 忧,陶文辉.螺旋焊管拉伸试验断裂位置的研究[J].焊管,2007,30(5):93.[doi:1001-3938(2007)05-0093-03]
 WU You,TAO Wen-hui.Study on Breaking Position of Tensile Testing of Helical Submerged Arc Welding Pipe[J].,2007,30(3):93.[doi:1001-3938(2007)05-0093-03]
[6]马小明,余 娟.螺旋埋弧焊管焊缝断裂失效分析[J].焊管,2007,30(6):31.[doi:1001-3938(2007)06-0031-05]
 MA Xiao-ming,YU Juan.Failure Analysis for the Spiral Weled Pipes[J].,2007,30(3):31.[doi:1001-3938(2007)06-0031-05]
[7]张世平,陈其卫,侯永高,等.自动管端除渣机的设计与应用[J].焊管,2007,30(6):59.[doi:1001-3938(2007)06-0059-02]
 ZHANG Shi-ping,CHEN Qi-wei,HOU Yong-gao,et al.Design & Application? of Auto-deslagging Unit of Pipe Ends[J].,2007,30(3):59.[doi:1001-3938(2007)06-0059-02]
[8]林春明,陈文豪.螺旋焊管拍片射线机安放位置的工艺探讨[J].焊管,2007,30(6):61.[doi:1001-3938(2007)06-0061-03]
 LIN Chun-ming,CHEN Wen-hao.Process Discussion on Installation Position of X Radiography-filming Unit for SSAW Pipe[J].,2007,30(3):61.[doi:1001-3938(2007)06-0061-03]
[9]白忠泉.螺旋焊管成型器点接触内压辊的压痕及其控制[J].焊管,2007,30(6):67.[doi:1001-3938(2007)06-0067-02]
 BAI Zhong-quan.Indentation and its Control of Point-Contacting Inside Press Roller of Forming Unit of SSAW Pipe[J].,2007,30(3):67.[doi:1001-3938(2007)06-0067-02]
[10]王力霞,胡岩鹏,张艳秋,等.某输油管线螺旋焊管焊缝断裂原因分析[J].焊管,2008,31(1):33.[doi:1001-3938(2008)01-0033-03]
 WANG Li-xia,HU Yan-peng,ZHANG Yan-qiu,et al.Fracture Analysis on Weld Seam of SSAW Pipe of Certain Oil Pipeline[J].,2008,31(3):33.[doi:1001-3938(2008)01-0033-03]

备注/Memo

备注/Memo:
收稿日期: 2017-02-08
作者简介: 周书亮(1984—),男,大学本科,工程师,主要从事电气设计与设备维护工作。
更新日期/Last Update: