[1]潘 强,刘尔玺,冯淳元,等.Q235钢板表面堆焊不锈钢改性处理[J].焊管,2017,40(4):22-26.[doi:10.19291/j.cnki.1001-3938.2017.04.005]
　PAN Qiang,LIU Erxi,FENG Chunyuan,et al.Q235 Steel Plate Surface Overlaying Stainless Steel Modified Process[J].,2017,40(4):22-26.[doi:10.19291/j.cnki.1001-3938.2017.04.005]
点击复制

Q235钢板表面堆焊不锈钢改性处理
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
40
期数:
2017年第4期
页码:
22-26
栏目:
应用与开发
出版日期:
2017-04-28

文章信息/Info

Title:
Q235 Steel Plate Surface Overlaying Stainless Steel Modified Process
文章编号:
10.19291/j.cnki.1001-3938.2017.04.005
作者:
潘 强; 刘尔玺; 冯淳元; 杨耀华; 王 波; 潘会平
兰州市兰石能源装备工程研究院有限公司， 兰州 730050
Author(s):
PAN Qiang;  LIU Erxi;  FENG Chunyuan;  YANG Yaohua;  WANG Bo;  PAN Huiping
Lanshi Energy Equipment Engineering Research Institute Co.， Ltd.， Lanzhou 730050， China
关键词:
Q235钢; 堆焊; 不锈钢; 表面性能
Keywords:
Q235 steel;  overlaying welding;  stainless steel;  surface performance
分类号:
TG455
DOI:
10.19291/j.cnki.1001-3938.2017.04.005
文献标志码:
B
摘要:
为了提高Q235钢表面的耐蚀性和硬度等性能，采用TIG堆焊技术对Q235钢进行表面堆焊不锈钢试验，在30个试样中选取堆焊效果较好的4个试样，分析了其组织的宏观和微观形貌，选择15#试样堆焊层进行了腐蚀试验，并与Q235钢板的硬度进行了比较分析。试验结果表明，通过在Q235钢板表面堆焊不锈钢进行表面处理，其表面硬度有明显的提高，堆焊后Q235钢板表面堆焊层的耐蚀性比Q235钢母材的耐蚀性强。
Abstract:
In order to improve the surface performance of Q235 steel， such as corrosion resistance， hardness and so on， in this article， it adopted TIG technology to conduct surface overlaying welding on stainless steel， carried out 30 groups of tests，selected four samples which possessing good overlaying welding effect， analyzed the macroscopic and microscopic morphology， and selected 15# specimen to conduct corrosion test. Finally， it is concluded that surface overlaying welding on stainless steel for Q235 steel， the surface hardness of steel plate obviously be increased， the corrosion resistance of Q235 steel after surfacing welding is better than that of Q235 steel base metal.

参考文献/References:

[1]王娟. 表面堆焊与热喷涂技术[M].? 北京:化学工业出版社, 2004.
[2]梁志杰. 现代表面镀覆技术[M]. 北京:国防工业出版社，2005.
[3]牛艳, 林振龙, 林国基,等. Q235钢在海洋铁细菌作用下的腐蚀行为研究[J]. 海洋环境科学, 2014(5): 739-744.
[4]LI Y L, ZHANG H, HU R H, et al. Development of a steel rapid rotoyping system based on TIG welding deposition technology[J]. Mechanical & Electrical School, 2008(9):154-157.
[5]APASOV A M, APASOV A A. Studying in formative parameters of acoustical emission during welding articles from austenitic heat-resistance steel[C]∥Proceedings of the International Scientific and Practical Conference of Students,Post-graduates and Young Scientists.[s.l.]:IEEE, 2001:81-84.
[6]禹业晓, 李玉龙, 徐健宁, 等. Q235钢板表面TIG法熔覆铜接头的组织和力学性能[J]. 航空材料学报, 2014,34(1): 62-68.
[7]白梅, 刘斌, 廖海红, 等. 基于激光熔覆不锈钢涂层技术的工艺及腐蚀性研究[J]. 热加工工艺,2015(6):125-128.
[8]刘琛. Q235钢表面化学镀Ni-Cu-P的研究[J]. 铸造技术,2005,26(11): 879-882.
[9]熊忠琪, 邓琦林. 不锈钢堆焊层抗磨损腐蚀性能的实验研究[J]. 电加工与磨具, 2009(2): 40-43.
[10]丁志敏, 冯秋元, 石子源, 等. Q235钢表面熔盐电镀铝及其耐蚀性研究[J]. 金属热处理, 2004, 29(7): 41-43.
[11]吴志生, 云晖, 刘翠荣, 等. Q235钢表面堆焊不锈钢的组织与性能[J]. 焊接技术, 2014(3): 13-15.
[12]李玉龙, 禹业晓. TIG堆焊技术研究进展[J]. 电焊机,2012, 42(12): 70-76.
[13]禹业晓. 低碳钢堆焊表面改性工艺及其热过程分析[D].?南昌: 南昌大学, 2013.

相似文献/References:

[1]张希川,李 健,张瑞涛,等.管道内壁不锈钢焊条堆焊的耐腐蚀工艺研究[J].焊管,2012,35(8):9.[doi:１００１－３９３８（２０１２）０8-0009-04]
　ZHANG Xichuan,LI Jian,ZHANG Ruitao,et al.Research on Corrosion Resistance Process of Stainless Steel Electrode Overlaying Welding on the Inner Wall of Pipeline[J].,2012,35(4):9.[doi:１００１－３９３８（２０１２）０8-0009-04]
[2]付现桥,徐 敬,卜明哲,等.L360QS/316L不锈钢复合钢管焊接工艺和性能研究[J].焊管,2014,37(2):48.[doi:１００１－３９３８（２０１4）02-0048-05]
　Fu Xianqiao,XU Jing,BU Mingzhe,et al.Welding Process and Performance Study on L360QS/316L Stainless Steel Clad Pipe[J].,2014,37(4):48.[doi:１００１－３９３８（２０１4）02-0048-05]
[3]左丽娜,杜先鹏,马玉强,等.大型阀门耐腐蚀层的堆焊与加工工艺研究[J].焊管,2014,37(3):34.[doi:１００１－３９３８（２０１4）03-0034-05]
　ZUO Lina,DU Xianpeng,MA Yuqiang,et al.Research on Corrosion Resistance Layers Surfacing and Cutting Processes of Large-scale Valve[J].,2014,37(4):34.[doi:１００１－３９３８（２０１4）03-0034-05]
[4]何 帅,王立君,梁恩宝,等.预测X65钢堆焊质量的PSO+BP算法[J].焊管,2015,38(2):5.[doi:１００１－３９３８（２０１5）02-0005-06]
　HE Shuai,WANG Lijun,LIANG Enbao.PSO + BP Algorithm Prediction of X65 Steel Surfacing Quality[J].,2015,38(4):5.[doi:１００１－３９３８（２０１5）02-0005-06]
[5]王富铎,梁国栋,王 斌,等.海洋用CRA双金属复合管管端全自动堆焊工艺改进[J].焊管,2015,38(3):43.[doi:１００１－３９３８（２０１5）03-0043-05]
　WANG Fuduo,LIANG Guodong,WANG Bin,et al.Automatic Overlay Welding Procedure Improvement of the CRA Bimetal Lined Pipe Ends Used in Offshore[J].,2015,38(4):43.[doi:１００１－３９３８（２０１5）03-0043-05]
[6]杨 玭,曹晶晶,袁鹏斌.316L/X65双金属复合管管端根焊工艺研究[J].焊管,2015,38(12):40.[doi:１００１－３９３８（２０１5）12-0040-06]
　YANG Pin,CAO Jingjing,YUAN Pengbin.Research on Root Welding Process of 316L/X65 Double-metal Composite Pipe End[J].,2015,38(4):40.[doi:１００１－３９３８（２０１5）12-0040-06]
[7]张念涛,吴志星,李 晋,等.X65钢管内壁堆焊镍基合金耐蚀层过程的数值仿真模拟[J].焊管,2016,39(2):14.[doi:10.19291/j.cnki.1001-3938.2016.02.004]
　ZHANG Niantao,WU Zhixing,LI Jin,et al.Nickel-base Alloy Corrosion Resistance Layer Numerical Simulation of X65 Steel Pipe Inwall Surfacing Welding[J].,2016,39(4):14.[doi:10.19291/j.cnki.1001-3938.2016.02.004]
[8]杜兴吉,沈 赟,沈晓军,等.X射线平板数字成像技术在复合管管端堆焊检测中的应用[J].焊管,2016,39(6):22.[doi:10.19291/j.cnki.1001-3938.2016.06.005]
　DU Xingji,SHEN Yun,SHEN Xiaojun,et al.Application of X-ray Panel Digital Imaging Inspection Technology inSurfacing Welding of Composite Pipes Tube End[J].,2016,39(4):22.[doi:10.19291/j.cnki.1001-3938.2016.06.005]
[9]张俊宝,唐 识,梅 乐,等.埋弧堆焊低合金钢熔敷金属组织和性能研究[J].焊管,2016,39(8):16.[doi:10.19291/j.cnki.1001-3938.2016.08.004]
　ZHANG Junbao,TANG Shi,MEI Le,et al.Study on Microstructure & Properties of Submerged Arc Surfacing Welding Low-alloy Steel Weld Metal[J].,2016,39(4):16.[doi:10.19291/j.cnki.1001-3938.2016.08.004]
[10]吴建英.细长喷水管道的堆焊工艺及变形控制[J].焊管,2017,40(9):39.[doi:10.19291/j.cnki.1001-3938.2017.09.009]
　WU Jianying.Surfacing Welding Process and Deformation Control of Elongated Spary Pipe[J].,2017,40(4):39.[doi:10.19291/j.cnki.1001-3938.2017.09.009]

备注/Memo

备注/Memo:
收稿日期： 2017－01－12
作者简介： 潘?? 强（1987—）， 男， 2013年毕业于南昌大学材料成型及控制工程专业， 大学本科， 现主要从事材料研发、 车辆工程方面的工作。
更新日期/Last Update: