[1]董 斌,徐振亚.热轧板HIC试样缺陷的超声判定技术[J].焊管,2017,40(5):58-61.[doi:10.19291/j.cnki.1001-3938.2017.05.012]
　DONG Bin,XU Zhenya.Ultrasonic Determination Technology of Hot-Rolled Plate HIC Specimen Defects[J].,2017,40(5):58-61.[doi:10.19291/j.cnki.1001-3938.2017.05.012]
点击复制

热轧板HIC试样缺陷的超声判定技术
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
40
期数:
2017年第5期
页码:
58-61
栏目:
经验交流
出版日期:
2017-05-28

文章信息/Info

Title:
Ultrasonic Determination Technology of
Hot-Rolled Plate HIC Specimen Defects
文章编号:
10.19291/j.cnki.1001-3938.2017.05.012
作者:
董 斌; 徐振亚
宝山钢铁股份有限公司钢管条钢事业部， 上海 201900
Author(s):
DONG Bin;  XU Zhenya
Tube, Pipe and Bar Business Unit, Baoshan Iron& Steel Co., Ltd., Shanghai 201900, China
关键词:
检测; 超声波; HIC;  夹杂; 缺陷
Keywords:
detection;  ultrasonic ;  HIC;  inclusion;  defect
分类号:
TG115.285
DOI:
10.19291/j.cnki.1001-3938.2017.05.012
文献标志码:
B
摘要:
为了快速检测出热轧板HIC试样中的夹杂和裂纹，并对缺陷进行准确定位、定性和测长，首先采用60°斜探头对夹杂和裂纹进行定位和定性，再用直探头检测出缺陷的长度，最后给出了夹杂和裂纹的静态和动态反射波形。该超声波判定技术可以用来确认试样是否符合标准要求，并进一步判定相应产品是否合格。与传统检测方法相比，该技术能够快速准确地定位和定性缺陷，并且定量精度由原来的2 mm提高至0.5 mm，能够满足API SPEC 5L的相关要求。
Abstract:
In order to quickly inspect the slag and crack in HIC specimen of hot rolled plate, and conduct accurate positioning, qualitative and length measurement for defects, firstly, it adopted 60°oblique sensor to carry out positioning and qualitative, and then used straight probe to detect defect length, finally gave the static and dynamic state reflection waveform of the slag and crack. The ultrasonic technology can be used to confirm the sample whether accord with standard requirements, and further determine the corresponding product is qualified. Compared with the traditional detection method, the technology can rapidly and accurately positioning and qualitative defects, and the quantitative accuracy was increased from 2 mm to 0.5 mm, can meet the requirements of the relevant API SPEC 5L.

参考文献/References:

[1] Q/SY GJX 0125―2007，西气东输二线管道工程用 X70直缝埋弧焊管技术条件[S].
[2] GB/T9711.1―1997，石油天然气工业输送钢管交货技术条件第1部分: A级钢管[S].
[3] GB/T9711.2—1997，石油天然气工业输送钢管交货技术条件第2部分: B级钢管[S].
[4] API SPEC 5L（第45版），管线钢管规范[S].
[5] DNV-OS-F101: 2013，Submarine Pipeline Systems[S].
[6] 郑辉，林树青. 超声检测（第二版）[M]. 北京：中国劳动社会保障出版社，2008.
[7] 胡天明. 超声探伤[M]. 武汉：武汉测绘科技大学出版社，1994.
[8] 中国特种设备检验协会. 超声波探伤（无损检测II级培训教材 [M] . 北京：中国劳动社会保障出版社，2008.
[9] ASTM E273—2015，焊接钢管焊接区超声波检验标准做法（英文版）[S].
[10] 超声探伤编写组. 超声波探伤[M]. 北京：劳动人事出版社，1989.

相似文献/References:

[1]李兴国,李海文.简述智能球在管线变形检测中的应用[J].焊管,2007,30(5):61.[doi:1001－3938（2007）05－0061－02]
　LI Xing-guo,LI Hai-wen.Introduction to Application of Intelligence Ball in the Inspection of Pipe Deformation[J].,2007,30(5):61.[doi:1001－3938（2007）05－0061－02]
[2]吴健,卫尊义,白小亮,等.石油管螺纹检测人员技术资质培训的发展[J].焊管,2009,32(5):51.[doi:1001－3938（2009）05－0051－04]
　WU Jian,WEI Zun-yi,BAI Xiao-liang,et al.The Development of Oil Pipe Thread Inspector Technology Qualification Training[J].,2009,32(5):51.[doi:1001－3938（2009）05－0051－04]
[3]汪 超,王卫华,苏景富.超声波双晶片K1探头的设计与应用[J].焊管,2012,35(2):20.[doi:１００１－３９３８（２０１２）０２-0020-04]
　WANG Chao,WANG Wei-hua,SU Jing-fu.Design and Application of Ultrasonic Double Crystal K1 Probe[J].,2012,35(5):20.[doi:１００１－３９３８（２０１２）０２-0020-04]
[4]王 珂,罗金恒,赵 雄,等.沙漠地区输油管道内腐蚀开挖检测与评价[J].焊管,2012,35(8):55.[doi:１００１－３９３８（２０１２）０8-0053-04]
　WANG Ke,LUO Jinheng,ZHAO Xiong,et al.Inner Corrosion Detection and Evaluation of Oil Pipeline in Desert[J].,2012,35(5):55.[doi:１００１－３９３８（２０１２）０8-0053-04]
[5]张晨鹏,付彦宏,申立群,等.小壁厚X80M钢螺旋缝埋弧焊管的研制[J].焊管,2013,36(9):62.[doi:１００１－３９３８（２０１3）09-0062-04]
　ZHANG Chenpeng,FU Yanhong,SHEN Liqun,et al.Research & Development of Thin Wall Thickness X80M SAWH Steel Pipe[J].,2013,36(5):62.[doi:１００１－３９３８（２０１3）09-0062-04]
[6]甘正红,方晓东,余国民,等.薄壁高频电阻焊管焊缝的爬波检测[J].焊管,2014,37(2):33.[doi:１００１－３９３８（２０１4）02-0033-05]
　GAN Zhenghong,FANG Xiaodong,YU guomin,et al.Creeping Wave Testing for Weld of Thin-walled High-frequency Electric Resistance Welded Pipe[J].,2014,37(5):33.[doi:１００１－３９３８（２０１4）02-0033-05]
[7]赵 远,岳庚新.数字射线实时成像检测技术研究[J].焊管,2015,38(11):33.[doi:１００１－３９３８（２０１5）11-0033-04]
　ZHAO Yuan,YUE Gengxin.Research on Digital Radiography Real-time Imaging Detection Technology[J].,2015,38(5):33.[doi:１００１－３９３８（２０１5）11-0033-04]
[8]钱立锋.Q345钢板拉伸试验磁记忆检测信号特性的研究[J].焊管,2015,38(11):52.[doi:１００１－３９３８（２０１5）11-0052-04]
　QIAN Lifeng.Study on the Characteristics of Magnetic Memory Testing Signal in Q345 Steel Plate Tensile Test[J].,2015,38(5):52.[doi:１００１－３９３８（２０１5）11-0052-04]
[9]林春明,杨伟芳,史文华,等.小直径直缝焊管X射线检测双壁法的灵敏度比较[J].焊管,2016,39(3):31.[doi:10.19291/j.cnki.1001-3938.2016.03.007]
　LIN Chunming,YANG Weifang,SHI Wenhua,et al.Sensitivity Comparison of Double-wall X-ray Detection for Small DiameterLongitudinal Welded Pipe[J].,2016,39(5):31.[doi:10.19291/j.cnki.1001-3938.2016.03.007]
[10]岳庚新,王 妍,赵 远.超声相控阵技术对不同厚度对接焊缝表层缺陷的定位[J].焊管,2016,39(5):52.[doi:10.19291/j.cnki.1001-3938.2016.05.010]
　YUE Gengxin,WANG Yan,ZHAO Yuan.Ultrasonic Phased Array Technology Positioning Analysis of Butt Weld Surface Defect with Different Thickness[J].,2016,39(5):52.[doi:10.19291/j.cnki.1001-3938.2016.05.010]
[11]董 斌,李新文.入射角偏差对超声波检测结果的影响[J].焊管,2017,40(11):55.[doi:10.19291/j.cnki.1001-3938.2017.11.012]
　Dong Bin,Li Xinwen.Influence of Deviation of Incident Angle on Result of UT Testing[J].,2017,40(5):55.[doi:10.19291/j.cnki.1001-3938.2017.11.012]

备注/Memo

备注/Memo:
收稿日期： 2017-02-09
作者简介： 董?? 斌（1984—），男，工程师，硕士，研究方向为无损探伤。
更新日期/Last Update: