[1]袁雪婷,等.组织特征对高强管线钢焊缝及热影响区韧性的影响[J].焊管,2017,40(11):22-27.[doi:10.19291/j.cnki.1001-3938.2017.11.005]
 Influence of Microstructure Characteristics on the Toughness of High Strength Pipeline Steel Weld and Heat Affected Zone.[J].,2017,40(11):22-27.[doi:10.19291/j.cnki.1001-3938.2017.11.005]
点击复制

组织特征对高强管线钢焊缝及
热影响区韧性的影响
()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
40
期数:
2017年第11期
页码:
22-27
栏目:
试验与研究
出版日期:
2017-11-28

文章信息/Info

文章编号:
10.19291/j.cnki.1001-3938.2017.11.005
作者:
袁雪婷1 2李 丽3杨 军1 2牛 辉1 2刘海璋1 2郭 丹2
1. 国家石油天然气管材工程技术研究中心, 陕西 宝鸡 721008;
2. 宝鸡石油钢管有限责任公司, 陕西 宝鸡 721008;
3. 中国石油集团川庆钻探工程有限公司 安全环保质量监督检测研究院, 四川 广汉 618300
Author(s):
Influence of Microstructure Characteristics on the Toughness of High Strength Pipeline Steel Weld and Heat Affected Zone
YUAN Xueting1,2,LI Li3,YANG Jun1,2, NIU Hui1,2, LIU Haizhang1,2,  GUO Dan2
关键词:
高强管线钢韧性焊接接头第二相粒子
Keywords:
high strength pipeline steel toughness welded joints second phase particles
分类号:
TG142.1
DOI:
10.19291/j.cnki.1001-3938.2017.11.005
文献标志码:
A
摘要:
为了研究组织特征对高强管线钢管焊缝及热影响区韧性的影响,降低管线建设成本,保证服役管道的安全性和可靠性,以X80管线钢为例,分析了奥氏体晶粒尺寸、第二项粒子、HAZ粗晶区第二相组织等对管线钢管焊缝及HAZ韧性的影响。分析结果表明,适当控制t8/5和tH,保证第二相粒子的数量、均匀分布及HAZ粗晶区贝氏体的均匀化和精细化,避免岛链状大尺寸尖角型M-A组元的产生是提高焊缝及热影响区韧性的有效方法。另外,在焊材的设计和制备上做好多元合金和微合金含量的精细配比和冶炼,防止合金元素偏聚,形成大尺寸夹杂和异类相影响焊缝塑韧性。
Abstract:
In order to research the influence of microstructure characteristics on the toughness of high strength line pipe weld and heat affected zone(HAZ), reduce costs of pipeline construction and ensure safety and reliability of service, a case study of X80 pipeline steel, the influence of austenite grain size, second phase particles, second phase structure of HAZ coarse grain zone on the toughness of weld and HAZ were analyzed. The analysis results showed that the effective ways to improve the toughness on welded and HAZ of high strength pipeline steel pipe were to control t8/5 and tH properly for guarantees the number and uniform distribution of the second phase particles and the uniformity and refinement of bainite in HAZ coarse grain area, and avoid the formation of the large-size angle-shaped M-A element of island chain. In addition, in the design and preparation of welding materials, achieve the subtle proportion and smelting of the content of the multi-alloy and micro-alloy to prevent forming inclusions and heterogeneous phases which influenced plasticity and toughness in the weld caused by the segregation of alloy elements.

参考文献/References:

[1] 潘家华. 我国的天然气及天然气管道工业[J]. 焊管, 2008, 31(4):5-6.
[2] 李鹤林, 吉玲康, 谢丽华. 中国石油管的发展现状分析[J]. 河北科技大学学报, 2006, 27(1):1-5.
[3] 张斌, 钱成文, 王玉梅, 等. 国内外高钢级管线钢的发展及应用[J]. 石油工程建设, 2012, 38(1):1-5.
[4] 王晓香. 焊接钢管技术的新进展[J]. 焊管, 2011, 34(3): 5-11.
[5] 李延丰. 中国螺旋缝埋弧焊管制造技术的发展[C]//第十四届中国(北方)钢管与管道技术交流会会议论文集.沧州: [s.n.] 2011:19-24.
[6] DEMOFONTI G, MANNUCCI G, HILLEBRAND H G, et al. Evaluation of the suitability of X100 steel pipes for high pressure gas transportation pipelines by full scale tests[C] //Proceedings of IPC 2004 International Pipeline Conference. Calgary, Alberta, Canada: IPC,2004:1-8.
[7] YOO J Y, AHN S S, SEO D H, et al. New development of high grade X80 to X120 pipeline steels[J]. Materials and Manufacturing Processes, 2011, 26(1):154-160.
[8] 余志峰, 史航, 佟雷, 等. 基于应变设计方法在西气东输二线的应用[J]. 油气储运, 2010, 29(2):143-147.
[9] 李鹤林, 李霄, 吉玲康, 等. 油气管道基于应变的设计及抗大变形管线钢的开发与应用[J]. 焊管, 2007, 5(30):5-11.
[10] 申坤, 王斌. TRIP效应在基于应变设计的大变形管线钢中的应用[J]. 焊管, 2013, 36(3):11-14.
[11] 冯耀荣. 油气输送管道工程技术进展[M]. 北京:石油工业出版社, 2006, 69-81.
[12] 石磊, 杨永和, 徐震, 等. 国产X80管线钢管焊接接头的力学性能[J]. 机械工程材料, 2015, 39(7): 99-116.
[13] 李延丰, 王庆强, 王庆国, 等. X90钢级螺旋缝埋弧焊管的研制结果及分析[J]. 钢管, 2011, 40(2): 25-28.
[14] 孙宏, 田鹏, 李涛, 等. X80级Φ1 422 mm×21.4 mm螺旋焊管的试制[J]. 焊管, 2013(S1): 15-19.
[15] 孙德新. X70螺旋焊管焊接的工程应用研究[D] . 天津:天津大学, 2007.
[16] 毕宗岳, 杨军, 牛靖, 等. X100高强管线钢焊接接头的断裂韧性[J]. 金属学报, 2013, 49(5): 576-582.
[17] GUO A M, LI S R, GUO J, et al. Effect of zirconium addition on the impact toughness of the heat affected zone in a high strength low alloy pipeline steel[J]. Materials Characterization, 2008, 59(2): 134-139.
[18] BHADESHIA H K D H. Reliability of weld microstructure and properties calculations[J]. Welding Journal, 2004, 83(9): 237-243.
[19] 吕德林,  李砚珠. 焊接金相分析[M].  北京: 机械工业出版社,1986.
[20] 高保雷. X80钢焊接HAZ晶粒长大规律研究及计算机模拟[D]. 天津:天津大学, 2005.
[21] 胡美娟, 王鹏, 韩新利, 等. X80级抗大变形管线钢焊接粗晶区的组织和性能[J]. 焊接学报, 2012, 33(9): 22-24.
[22] 张西锋, 袁守谦, 魏颖娟. 超细晶粒钢的制备原理及技术[J]. 钢铁研究学报, 2008, 20(4): 1-7
[23] 俞德刚. 钢的强韧化理论与设计[M]. 上海:上海交通大学出版社, 1990.
[24] 王国承, 王铁明, 尚德礼, 等. 超细第二相粒子强化钢铁材料的研究进展[J]. 钢铁研究学报, 2007, 19(6): 5-8.
[25] 陈翠欣, 李午申, 王庆鹏, 等. X80管线钢焊接粗晶区的组织和性能[J]. 焊接学报, 2005, 26(6): 77-80.
[26] 李学达. 第三代管线钢的焊接性能研究[D]. 北京:北京科技大学, 2015.
[27] 孟凡刚, 陈玉华, 王勇. 管线钢焊接局部脆化区的M-A组元[J]. 焊接技术, 2007, 36(1): 13-15.
[28] LI Y, BAKER T N. Effect of morphology of martensite-austenite phase on fracture of weld heat affected zone in vanadium and niobium microalloyed steels[J]. Mater Sci Technol, 2010(26): 1029-1040.
[29] 陈延清. X80高钢级管线钢埋弧焊丝的研究[D].天津: 天津大学, 2010.
[30] 毕宗岳, 杨军, 牛辉, 等. X90高强管线钢母材及焊缝的冲击韧性[J]. 材料热处理学报, 2017, 38(10): 72-79.
[31] LOWE I I, MITCHELL  A. Clean Steel: Superclean[M]. London: U K by J Nitting and R Vis Mauathan, 1995.

相似文献/References:

[1]许良红,陈延清,牛 辉.焊接热循环对高Nb X70级管线钢热影响区组织和韧性的影响[J].焊管,2009,32(5):18.[doi:1001-3938(2009)05-0018-04]
 XU Liang-hong,CHEN Yan-qing,NIU Hui.Effect on HAZ Structure and Toughness of Welding Thermal Cycle for High Nb X70 Grade Pipeline Steel[J].,2009,32(11):18.[doi:1001-3938(2009)05-0018-04]
[2]孔君华,郑琳,刘小国,等.西气东输二线工程用X80管线钢热轧板卷的组织与韧性[J].焊管,2011,34(5):5.
[3]张伟卫,李 洋,李 鹤,等.X100高强度管线钢管力学性能研究及试验分析[J].焊管,2011,34(10):16.[doi:1001-3938(2011)10-0016-04]
 ZHANG Wei-wei,LI Yang,LI He,et al.Structure and Welding Performance Study on X100 Line Pipe with High Strength[J].,2011,34(11):16.[doi:1001-3938(2011)10-0016-04]
[4]党 民,吕 能,李昱坤 编译李云龙,等.TAP项目X100钢管的制造[J].焊管,2011,34(11):75.[doi:1001-3938(2011)11-0075-06]
 Edited and Translated by DANG Min,LV Neng,LI Yu-kunChecked by LI Yun-long,et al.The Manufacture of X100 Steel Pipes for TAP Project[J].,2011,34(11):75.[doi:1001-3938(2011)11-0075-06]
[5]刘振双.GCr15钢焊管轧辊的热处理工艺[J].焊管,2012,35(2):37.[doi:1001-3938(2012)02-0037-04]
 LIU Zhen-shuang.Heat Treatment Process of Welded Pipe Roller Made by GCr15 Steel[J].,2012,35(11):37.[doi:1001-3938(2012)02-0037-04]
[6]于 磊,李志宏,王国平,等.X80M管线钢焊接接头性能研究[J].焊管,2013,36(12):19.[doi:1001-3938(2013)12-0019-04]
 YU Lei,LI Zhihong,WANG Guoping,et al.Research on X80M Pipeline Steel Welded Joint[J].,2013,36(11):19.[doi:1001-3938(2013)12-0019-04]
[7]李国鹏,韩秀林,赵 波,等.X80和X90管线钢热影响区组织与韧性对比[J].焊管,2014,37(7):13.[doi:1001-3938(2014)07-0013-05]
 LI Guopeng,HAN Xiulin,ZHAO Bo,et al.Comparison of Microstructure and Toughness of X80 and X90 Pipeline Heat-affected Zone (HAZ)[J].,2014,37(11):13.[doi:1001-3938(2014)07-0013-05]
[8]刘振伟,田 鹏,王志太,等.X90和X100管线钢管HAZ夏比冲击韧性研究[J].焊管,2014,37(8):30.[doi:1001-3938(2014)08-0030-04]
 LIU Zhenwei,TIAN Peng,WANG Zhitai,et al.tudy on Charpy Impact Toughness of X90 and X100 Line Pipe Heat Affected Zone (HAZ)[J].,2014,37(11):30.[doi:1001-3938(2014)08-0030-04]
[9]马 璇,等.MA的形成过程和分布对高强度管线钢力学性能的影响[J].焊管,2016,39(5):64.[doi:10.19291/j.cnki.1001-3938.2016.05.012]
 Edited and Translated by MA Xuan,WANG Hui,LIU Gangwei,et al.Effects of Distribution and the Formation Process of MA on Deformation and Toughness of High Strength Linepipe Steel[J].,2016,39(11):64.[doi:10.19291/j.cnki.1001-3938.2016.05.012]
[10]李 丽,杨 军,等.成型和焊接对高强管线钢管焊缝及热影响区冲击韧性的影响[J].焊管,2017,40(12):1.[doi:DOI: 10.19291/j.cnki.1001-3938.2017.12.001]
 LI Li,YANG Jun,NIU Hui,et al.Influences of Molding and Welding on Toughness of High Strength PipelineSteel Weld and Heat Affected Zone[J].,2017,40(11):1.[doi:DOI: 10.19291/j.cnki.1001-3938.2017.12.001]

备注/Memo

备注/Memo:

收稿日期:2017-06-13
基金项目: 国家科技支撑计划项目“超高强度油气输送管材关键技术研究”(项目编号2011BAE35B01)。

作者简介:袁雪婷(1988—),女,助理工程师,硕士,研究方向为油气管材开发及焊接技术。

更新日期/Last Update: 2017-12-11