[1]彭志珍,陶于春,任尚坤.基于不锈钢焊缝缺陷的无损检测研究进展[J].焊管,2018,41(4):1-6.[doi:10.19291/j.cnki.1001-3938.2018.04.001]
 PENG Zhizhen,TAO Yuchun,REN Shangkun.Research Progress on Non-destructive Testing Based on Weld Defects of Stainless Steel[J].,2018,41(4):1-6.[doi:10.19291/j.cnki.1001-3938.2018.04.001]
点击复制

基于不锈钢焊缝缺陷的无损检测研究进展()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
41
期数:
2018年第4期
页码:
1-6
栏目:
综述
出版日期:
2018-04-28

文章信息/Info

Title:
Research Progress on Non-destructive Testing Based on
Weld Defects of Stainless Steel
文章编号:
10.19291/j.cnki.1001-3938.2018.04.001
作者:
彭志珍1陶于春1任尚坤2
1. 苏州热工研究院有限公司深圳分公司, 广东 深圳 518124;
2. 南昌航空大学 无损检测技术教育部重点实验室, 南昌330063
Author(s):
PENG Zhizhen1  TAO Yuchun1  REN Shangkun2
1. Shenzhen Branch, Suzhou Nuclear Power Research Institute Co., Ltd., Shenzhen 518124,China;
2. Key Laboratory of Nondestructive Testing, Ministry of Education, Nanchang Hangkong University, Nanchang 330063, China
关键词:
不锈钢焊缝奥氏体无损检测超声检测ACFM检测
Keywords:
stainless steel weldseam austenitic non-destructive testing ultrasonic testing ACFM detection
分类号:
TG115.28
DOI:
10.19291/j.cnki.1001-3938.2018.04.001
文献标志码:
A
摘要:
为了全面了解奥氏体不锈钢焊缝无损检测技术的应用及发展,讨论了奥氏体不锈钢的焊缝组织、结构特征,研究了射线检测、超声检测、ACFM检测对不锈钢焊缝检测的进展,分析了其优点和缺点。分析认为,超声检测是检测不锈钢焊缝的主流方法,且取得了很大进展;不锈钢焊缝的超声检测方法所面临的主要问题是提高奥氏体不锈钢焊缝的检测信噪比以及缺陷定位的精确度;ACFM检测方法实现了无接触测量,对不锈钢焊缝的检测研究具有广阔的应用前景。
Abstract:
In order to fully understand the application and development of non-destructive testing technology for austenitic stainless steel welds, the microstructure characteristics of austenitic stainless steel welds were discussed, and the research progress, advantages and disadvantages of stainless steel welds for ray detection, ultrasonic testing, and ACFM testing were analyzed. According to the analysis, the ultrasonic detection method has made great progress in the detection of stainless steel welds and has become a mainstream method, but it needs to improve the signal-to-noise ratio and the defect location accuracy. The ACFM detection method realizes the non-contact measurement and has a good application prospect for the detection and research of stainless steel welds.

参考文献/References:

[1] 宋鹏,曹素红,曹玉库,等. 奥氏体不锈钢焊缝超声检测国内研究进展[J]. 机械化工, 2016(12):91-92.
[2] 罗强, 陈勇, 周军,等. 304奥氏体不锈钢焊缝低温热老化后的显微组织与力学性能[J].机械工程材料,2014, 38(11): 31-34.
[3] CHASSIGNOLE B,VILLARD D,NGUYEN VAN CHI G,et al. Ultra-sonic propagation in austenitic stainless steel welds-approximate model and numerical methods results and comparison with experiments[J]. Rev. Prog. QNDE,2000(19):153-160.
[4] 朱昌宏. 不锈钢焊缝X射线底片中断续条状阴影成像的分析和探讨[J]. 焊接技术,2007,34(7):73-74.
[5] CHASSIGNOLE B,VILLARD D,DUBUGET M,et al. Characterization of austenitic stainless steel welds for ultrasonic NDT[J]. Rev. Prog. QNDE,2000(20):1325-1332.
[6] APFEL A,MOYSAN J,CORNELOUP G,et al. Coupling an ultrasonic propagation code with a model of the heterogeneity of multipass welds to simulate ultrasonic testing[J]. Ultrasonics, 2005(43): 447-456.
[7] EDELMANN X. Application of ultrasonic testing techniques on austenitic welds for fabrication and in-service inspection[J]. NDT International, 1981(6):125-133.
[8] 崔建英,赵中龄,徐贺,等. 奥氏体不锈钢焊缝超声波探头的研制[J].北方交通大学学报, 1997,21(4): 472- 475.
[9] 郑中兴. 大厚度奥氏体钢焊缝超声检测用纵波斜射双晶探头研制[J]. 北方交通大学学报,1999,23(3): 115-119.
[10] 孙晓娜,雷毅,张鹰. 厚板奥氏体不锈钢焊缝显微组织分析[J]. 金属热处理,2006 ,31(10):21-23.
[11] 张鹰,张延丰,雷毅. 奥氏体不锈钢焊缝的超声波检测方法研究[J]. 无损检测, 2006,30(3): 119-122.
[12] 蒋政培,王强,谢正文,等. 奥氏体不锈钢焊缝的超声相控阵检测及定量分析[J].中国计量学院学报,2015,26(2): 166-171.
[13] 胡栋,王强,肖琨,等. 奥氏体不锈钢焊缝的相控阵超声检测[J]. 河南科技大学学报:自然科学版, 2013, 34(1):8-11.
[14] 陈振华, 郑志远,卢超. 不锈钢焊缝中超声传播特性及TOFD检测方法研究[J]. 电子测量与仪器学报, 2017, 31(7): 1129-1136.
[15] 陈振华, 张翀, 李新蕾, 等. 超声TOFD二次波检测技术在奥氏体不锈钢焊缝无损检测中的应用[J]. 无损检测, 2016, 38(6): 1-5.
[16] 陈振华,张翀,卢超,等. 奥氏体不锈钢焊缝超声TOFD检测中声波传播特性分析及其应用[J]. 焊接学报, 2016, 37(8): 91-96.
[17] 丛森, 刚铁,张佳莹. 基于幅度加权编码激励的不锈钢焊缝TOFD成像检测研究[J]. 机械工程学报,2017, 53(12): 52-59.
[18] 彭国平, 陈振华, 叶伟文,等. 基于合成孔径聚焦的不锈钢焊缝超声TOFD检测技术[J]. 无损检测,2016,38(9): 40-45.
[19] 王丽英,刘国奇,陈振华,等. 基于小波包分解的不锈钢焊缝超声TOFD检测图像修正[J]. 无损检测,2015, 37(5): 30-33.
[20] 李建忠, 刘国奇, 陈振华,等. 基于小波包分解的不锈钢焊缝超声TOFD检测信号及缺陷信号提取[J]. 无损检测, 2015, 37(1): 38-41.
[21] 许伯强,杨小平,徐桂东,等. 弱散材料中激光超声单散射理论模型[J]. 中国激光, 2012, 39(3): 63-67.
[22] 李加,倪辰荫,张宏超,等. 基于激光辅助加热的激光超声投捕法识别微裂纹[J].中国激光, 2013, 40(4):206-212.
[23] 曾伟,杨先明,王海涛,等. 激光超声技术及其应用[J]. 无损检测,2013,35(12): 49-52.
[24] SHIGEKI YASHIRO, NOBUYUKI TOYAMA, JUNJI  TAKATSUBO,et al. Laser-generation based imaging of ultrasonic wave propagagation on welded steel plates and its application to defect detection[J]. Materials Transactions, 2010, 51(11): 2067-2075.
[25] 曾伟, 王海涛,田贵云,等. 激光超声波成像技术在奥氏体不锈钢焊缝检测中的研究[J]. 中国激光, 2014, 41(7): 67-71.
[26] 魏朋,任尚坤,叶顺科. 扰动磁场检测笔式探头的研制及试验分析[J]. 仪表技术与传感器,2016 (7):32-35.
[27] 周留赐,任尚坤. 交流电磁场检测仪的信号处理电路设计[J]. 仪表技术与传感器, 2016(2): 31-33.

相似文献/References:

[1]宗 波,刘 新,杨万霞.VistaWeld焊缝自动跟踪系统在螺旋焊管生产中的应用[J].焊管,2007,30(4):58.[doi:1001-3938(2007)04-0058-03]
 ZONG Bo,LIU xin,YANG Wan-xia.Application of“Vista Weld”Weld Automatic Tracking System in the Production of Spiral Submerged Arc Welded Pipe[J].,2007,30(4):58.[doi:1001-3938(2007)04-0058-03]
[2]申英华,胡 剑.焊缝超声检测的基本特征及操作要点[J].焊管,2007,30(4):72.[doi:1001-3938(2007)04-0072-03]
 SHEN Ying-hua,HU Jian.Basic Character and Operational Points of Weld Ultrasonic Testing[J].,2007,30(4):72.[doi:1001-3938(2007)04-0072-03]
[3]何德孚,曹志樑,周志江,等.奥氏体不锈钢焊管焊缝铁素体含量及其测定[J].焊管,2007,30(5):30.[doi:1001-3938(2007)05-0030-06]
 HE De-fu,CAO Zhi-liang,ZHOU Zhi-jiang,et al.Ferritic Content of Austenitic Stainless Steel Weld seam and It’s Measurement Methods[J].,2007,30(4):30.[doi:1001-3938(2007)05-0030-06]
[4]张朝生 编译.C,Si,Mn含量和焊接区氧含量对ERW钢管焊缝区压扁试验的影响[J].焊管,2007,30(5):98.[doi:1001-3938(2007)05-0098-02]
 Edited and Translated by ZHANG Chao-sheng.The Affects of Contents of C,Si,Mn and Concentration of Oxygen in Welding Area to Flatten Test of ERW Pipe[J].,2007,30(4):98.[doi:1001-3938(2007)05-0098-02]
[5]袁大伟.ERW焊管焊缝冲击韧性的影响因素分析[J].焊管,2008,31(3):68.[doi:1001-3938(2008)03-0068-03]
 YUAN Da-wei.Effecting Factor Analysis for ERW Pipe Weld Impact Toughness[J].,2008,31(4):68.[doi:1001-3938(2008)03-0068-03]
[6]刘 平,杨军红,刘浩新.焊缝及焊接材料中Ni元素可见光谱快速分析方法研究[J].焊管,2008,31(5):41.[doi:1001-3938(2008)05-0041-04]
 LIU Ping,YANG Jun-hong,LIU Hao-xin.Research on Visible Spectroscopic Analysis Method of Ni Content in Welding Consumables and Weld[J].,2008,31(4):41.[doi:1001-3938(2008)05-0041-04]
[7]刘平,杨军红,刘浩新.焊缝及焊接材料中W元素可见光谱快速分析方法研究[J].焊管,2009,32(4):18.[doi:1001-3938(2009)04-0018-03]
 LIU Ping,YANG Jun-hong,LIU Hao-xin.Visual Spectrum Rapid Analysis and Research on W Element in Weld and Welding Material[J].,2009,32(4):18.[doi:1001-3938(2009)04-0018-03]
[8]陆卫平.两种辊弯成型的方矩形管焊缝部位的检测分析[J].焊管,2009,32(4):21.[doi:1001-3938(2009)04-0021-04]
 LU Wei-ping.Inspection Analysis on Two Kind of Roll Forming Rectangular Pipe Weld[J].,2009,32(4):21.[doi:1001-3938(2009)04-0021-04]
[9]张祥,曾涛.基于ANSYS压力容器筒体与平板封头焊缝残余应力有限元分析[J].焊管,2009,32(5):22.[doi:1001-3938(2009)05-0022-03]
 ZHANG Xiang,ZENG Tao.The Finite Element Analysis on the Weld Residual Stress of the Pressure Vessel Cylinder and Plate Dome Based on ANSYS[J].,2009,32(4):22.[doi:1001-3938(2009)05-0022-03]
[10]刘平,杨军红,刘浩新.焊缝及焊接材料中V元素快速光谱分析[J].焊管,2009,32(10):19.[doi:1001-3938(2009)10-0019-03]
 LIU Ping,YANG Jun-hong,LIU Hao-xin.Digital Visible Spectroscopic Analysis of V in Weld and Welding Material[J].,2009,32(4):19.[doi:1001-3938(2009)10-0019-03]

备注/Memo

备注/Memo:
收稿日期: 2018-01-26
作者简介:彭志珍(1985—), 湖南双峰人, 男, 硕士, 工程师, 主要从事压水堆核岛在役检查工作。
更新日期/Last Update: 2018-05-28