[1]徐 凯,等.油气管道流-固耦合振动响应实现方法*[J].焊管,2018,41(5):57-62.[doi:10.19291/j.cnki.1001-3938.2018.05.011]
 XU Kai,ZHOU Xinyi,et al.Realization Method of Fluid-solid Coupling Vibration Response for Oil and Gas Pipeline[J].,2018,41(5):57-62.[doi:10.19291/j.cnki.1001-3938.2018.05.011]
点击复制

油气管道流-固耦合振动响应实现方法*()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
41
期数:
2018年第5期
页码:
57-62
栏目:
经验交流
出版日期:
2018-05-28

文章信息/Info

Title:
Realization Method of Fluid-solid Coupling Vibration Response 
for Oil and Gas Pipeline
文章编号:
10.19291/j.cnki.1001-3938.2018.05.011
作者:
徐 凯1 2周新义1 2杨晓龙1 2李周波1 2刘占浩2郭 鹏2温晓锋2
1. 国家石油天然气管材工程技术研究中心,陕西 宝鸡 721008;
2. 宝鸡石油钢管有限责任公司,陕西 宝鸡 721008
Author(s):
XU Kai 1 2 ZHOU Xinyi 1 2 YANG Xiaolong 1 2 LI Zhoubo 1 2 LIU Zhanhao 2 GUO Peng 2 WEN Xiaofeng 2
1. Chinese National Engineering Research Center for Petroleum and Natural Gas Tubular Goods, Baoji 721008, Shaanxi, China;
2. Baoji Petroleum Steel Pipe Co., Ltd., Baoji 721008, Shaanxi, China
关键词:
油气管道流-固耦合有限元分析数据传递
Keywords:
oil and gas pipeline fluid-solid coupling finite element analysis data transmission
分类号:
TE832
DOI:
10.19291/j.cnki.1001-3938.2018.05.011
文献标志码:
B
摘要:
为了准确描述油气管道服役时管体结构本身振动与其内部流体产生流-固耦合的振动响应模型,通过分析油气管道流-固耦合的分类、流-固耦合振动的基本理论以及耦合交界面上的数据传递等问题,建立了一种准确高效的耦合数据界面传递方法。该方法可以实现油气管道流-固耦合振动全流程的计算,为油气管道的流-固耦合振动响应的快速分析与计算、保障管道服役系统的安全性提供一定的理论基础。
Abstract:
In order to accurately describe the vibration-response model of fluid-solid coupling with the vibration of the pipe structure itself and its internal fluid when the oil and gas pipeline is in service, the classification of fluid-solid coupling, the basic theories of fluid-solid coupling vibration and the data transmission method of coupling interface were analyzed to establish an accurate and efficient interface transmission method of coupling data. This method can be used to calculate the whole process of fluid-solid coupling vibration of oil and gas pipelines, and provide the theoretical basis of the rapid analysis and calculation of the fluid-solid coupled vibration response of oil and gas pipelines and the security of pipeline services systems.

参考文献/References:

[1] 张立翔,黄文虎,TIJSSELING A S. 输流管道流固耦合振动研究进展[J]. 水动力学研究进展,2000,15(3):366-379.
[2] 钱若军,董石麟,袁行飞. 流固耦合理论研究进展[J]. 空间结构,2008,14(1):6-18.
[3] 张磊,郎进花,王松岭. 流固耦合问题数值模拟算法研究进展[J]. 热力发电,2015,44(1):1-7.
[4] 张阿漫. 流固耦合动力学[M].北京:国防工业出版社,2011.
[5] KRUNTCHEVA M R. Acoustic-Structural Resonances of Thin-Walled Structure—Gas Systems[J]. Journal of Sound and Vibration,2006,128(6):722-731.
[6] APPA K. Finite Surface Splines[J]. Joural of Aircraft,1989,26(5):495-496.
[7] SMITH M J,HODGES D H. Evaluation of Computational Algorithms Suitable for Fluid-Structure Interactions[J]. Journal of Aircraft,2000,37(2):282-288.
[8] 李鹤林. 天然气输送钢管研究与应用中的几个热点问题[J]. 焊管,2000(3):43-61,90.
[9] 王晓香. 当前管线钢管研发的几个热点问题[J]. 焊管,2014,37(4):5-13.
[10] 李鹤林. 油气输送钢管的发展动向与展望[J]. 焊管,2004(6):1-11,87.
[11] 刑景棠,周盛,崔尔杰. 流固耦合力学概述[J]. 力学进展,1997(1):19-38.
[12] 朱洪来,白象忠. 流固耦合问题的描述方法及分类简化准则[J]. 工程力学,2007(10):92-99.
[13] 曹亮. 输流管道流固耦合振动特性分析[D]. 昆明:昆明理工大学,2004.
[14] 李琳,喻立凡. 管道及管路系统流固耦合振动问题的研究动态[J]. 应用力学学报,1997,14(3):40-47.
[15] 梁建术,苏强,李欣业. 基于ANSYS/Workbench流固耦合输液波纹管的模态分析[J].机械设计与制造,2013(2):91-93.
[16] 宋学官,蔡林,张华. ANSYS流固耦合分析与工程实例[M]. 北京:中国水利水电出版社,2012:1-2.
[17] 单广斌,刘小辉,亓婧,等. 天然气管道开裂失效分析[J]. 压力容器,2013,30(11):47-51.
[18] 任建亭,姜节胜. 输流管道系统振动研究进展[J]. 力学进展,2001,33(3):313-324.
[19] 祖楠,黄维平. 考虑流固耦合时的海底管道悬跨段非线性动力分析[J]. 中国海洋大学学报(自然科学版),2006(1):168-172.
[20] 陈坚红,周天情,盛德仁,等. 充流管道单向流固耦合数值模拟自动化研究[J]. 动力工程学报,2012,32(8):612-616,633.
[21] WIGGERT D C,HATFIELD F J,STUCDENBRUCK S. Analysis of liquid and structural transients by the method of characteristics[J]. Journal of Fluids Engineering,1985 (109):161-165.
[22] PAIDOUSSIS M P ,LI G X. Pipe conveying fluid: a model dynamical problem[J]. Journal of Fluid Mechanics,1993,7(2): 137-204.
[23] LAVOOIJ C S W,TIJSSELING A T. Fluid structure interaction in liquid-filled piping systems[J]. Journal of Fluids and Structures,1991,5(5):573-595.
[24] MISRA A K,PAIDOUSSIS M P,VAN K S. On the dynamics of curved pipes transporting fluid. part Ⅱ:extensible theory[J]. Journal of Fluids and Structures,1988,2(3):221-244.
[25] 苏强. 基于ANSYS Workbench的输液波纹管道振动特性分析和振动控制的研究[D]. 石家庄:河北科技大学,2013.
[26] 徐凯,张峰,李周波,等. 油气管道流固耦合振动特性数值分析[J]. 焊管,2016,39(3):25-30.
[27] 喻萌. 基于ANSYS的输流管道流固耦合特性分析[J]. 中国舰船研究,2007(5):54-57,67.
[28] 夏永胜,张成龙. 基于ANSYS Workbench的液压管道流固耦合振动分析[J]. 流体传动与控制,2017(3):38-41,57.
[29] 李丽丹,李声. 基于CFX和Workbench的数值仿真技术[J]. 中国测试,2010,36(5):79-80,83.
[30] 刘志远,郑源,张文佳,等.ANSYS-CFX单向流固耦合分析的方法[J].水利水电工程设计,2009,28(2):29-31.
[31] 盛美萍,王敏庆,孙进才. 噪声与振动控制技术基础[M]. 北京:科学出版社,2007,33-36.
[32] 费文平,杨建东,孙利华. 管道系统流体-结构耦合边界条件的分析方法[J]. 武汉水利电力大学学报,1997(6):10-14.
[33] 杨吉新,张可,党慧慧. 基于ANSYS的流固耦合动力分析方法[J]. 船海工程,2008,37(6):86-89.
[34] 苏波,钱若军,袁行飞. 流固耦合界面信息传递理论和方法研究进展[J]. 空间结构,2010,16(1):3-10.
[35] 诸葛起,蔡亦钢,杨世超,等. 建立流固耦合管路系统数学模型的一种方法[J].水动力学研究与进展,1989(1):6-12.
[36] SAMAREH J A. Discrete data transfer technique for fluid-structure interaction[C]//18th AIAA Computational Fluid Dynamics Conference.[s.l.]:AIAA,2007: 2007-4309.
[37] GLUCK M, BREUCR M, DURST F, et al. Computation of fluid-structure interaction on lightweight structures[J]. Journal of Wind Engineering and Industrial Aerodynamics,2001,89(14-15): 1351-1368.
[38] 徐敏,安效民,陈士橹. 一种CFD/CSD耦合计算方法[J]. 航空学报,2006(1):33-37.
[39] 徐敏,史忠军,陈士橹. 一种流体-结构耦合计算问题的网格数据交换方法[J]. 西北工业大学学报,2003(5):532-535.

相似文献/References:

[1]张振永,郭 彬.腐蚀管道剩余强度的确定及改造措施[J].焊管,2007,30(4):75.[doi:1001-3938(2007)04-0075-04]
 ZHANG Zhen-yong,GUO Bin.Determination of Residual Strength for Corrosion Pipeline and Rebuild Measures[J].,2007,30(5):75.[doi:1001-3938(2007)04-0075-04]
[2]徐庆磊,周 巍,尤海英,等.油气管道完整性管理体系分析[J].焊管,2007,30(6):81.[doi:1001-3938(2007)06-0081-04]
 XU QING-lei,LIU Ying,YOU Hai-ying,et al.Oil and Gas Pipeline Integrity Management System Analysis[J].,2007,30(5):81.[doi:1001-3938(2007)06-0081-04]
[3]刘 颖,刘长林,周 巍.油气管道的风险评价方法[J].焊管,2008,31(1):36.[doi:1001-3938(2008)01-0036-04]
 LIU Ying,LIU Chang-ling,ZHOU Wei.Risk Assessment of Oil-gas Pipeline[J].,2008,31(5):36.[doi:1001-3938(2008)01-0036-04]
[4]李为卫.油气输送管道用大直径双层埋弧焊管[J].焊管,2009,32(3):27.[doi:1001-3938(2009)03-0027-04]
 LI Wei-wei.Large Diameter& Double Layer SAW Linepipe for Oil and Gas[J].,2009,32(5):27.[doi:1001-3938(2009)03-0027-04]
[5]覃海涛,王爱民.管道补焊强度有限元分析[J].焊管,2009,32(7):22.[doi:1001-3938(2009)07-0022-04]
 QIN Hai-tao,WANG Ai-min.Finite Element Analysis of Repair Welding Strength in Oil Pipeline[J].,2009,32(5):22.[doi:1001-3938(2009)07-0022-04]
[6]薛振奎,隋永莉.焊接新技术在我国管道建设中的应用[J].焊管,2010,33(4):58.[doi:1001-3938(2010)04-0058-04]
 XUE Zhen-kui,SUI Yong-li.The Application of the New Welding Technology in Our Country Pipeline Construction[J].,2010,33(5):58.[doi:1001-3938(2010)04-0058-04]
[7]吉建立,许 勇,黄 龙,等.国内外油气管道防腐层阴极剥离试验方法及标准对比[J].焊管,2013,36(10):68.[doi:1001-3938(2013)10-0068-05]
 JI Jianli,XU Yong,HUANG Long,et al.Comparison of Cathodic Disbondment(CD) Test Methods andCriteria Between Overseas and China Oil and Gas Pipeline[J].,2013,36(5):68.[doi:1001-3938(2013)10-0068-05]
[8]郑茂盛,滕海鹏,胡 军,等.灰色理论用于油气管道安全性评价值得注意的问题[J].焊管,2013,36(11):20.[doi:1001-3938(2013)11-0020-03]
 ZHENG Maosheng,TENG Haipeng,HU Jun,et al.Notable Problems of Grey Theory Used in Safety Evaluation of Oil and Gas Pipeline[J].,2013,36(5):20.[doi:1001-3938(2013)11-0020-03]
[9]隋永莉,曹晓军,胡小坡.油气管道环焊缝焊接施工应关注的问题及建议[J].焊管,2014,37(5):62.[doi:1001-3938(2014)05-0062-04]
 SUI Yongli,CAO Xiaojun,HU Xiaopo.Focus on Problems and Suggestions of Oil and Gas Pipeline Circumferential Weld Welding at Site Construction[J].,2014,37(5):62.[doi:1001-3938(2014)05-0062-04]
[10]王国丽,庞艳风,谭建辉,等.油气管道全尺寸气体爆破试验场方案探讨[J].焊管,2015,38(4):33.[doi:1001-3938(2015)04-0033-05]
 WANG Guoli,PANG Yanfeng,TAN Jianhui,et al.Discussion on Full-size Gas Burst Test Field Used for Oil and Gas Pipeline[J].,2015,38(5):33.[doi:1001-3938(2015)04-0033-05]

备注/Memo

备注/Memo:
收稿日期:2018-02-01
基金项目: 陕西省科技统筹创新工程计划项目“110 ksi钢级SEW高抗挤套管开发”(项目编号2016KTCQ01-106)。
作者简介:徐 凯(1987—),硕士,工程师,主要从事油气管道力学性能研究工作。
更新日期/Last Update: 2018-05-28