[1]袁启亮,高莹莹,段小楠.管端平头倒棱机进给机构的发展及特点[J].焊管,2018,41(10):41-45.[doi:10.19291/j.cnki.1001-3938.2018.10.009]
　YUAN Qiliang,GAO Yingying,DUAN Xiaonan.Development and Characteristics of Feed Mechanism for Pipe-end Flat Chamfering Machine[J].,2018,41(10):41-45.[doi:10.19291/j.cnki.1001-3938.2018.10.009]
点击复制

管端平头倒棱机进给机构的发展及特点()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
41
期数:
2018年第10期
页码:
41-45
栏目:
工艺与设备
出版日期:
2018-10-28

文章信息/Info

Title:
Development and Characteristics of Feed Mechanism for
Pipe-end Flat Chamfering Machine
文章编号:
10.19291/j.cnki.1001-3938.2018.10.009
作者:
袁启亮; 高莹莹; 段小楠
辽沈工业集团有限公司，沈阳 110000
Author(s):
YUAN Qiliang; GAO Yingying; DUAN Xiaonan
Liaoshen Industries Group Co.，Ltd.，Shenyang 110000，China
关键词:
倒棱机; 进给机构; 液压; 变频电机; 伺服电机
Keywords:
chamfering machine; feed mechanism; hydraulic pressure; variable frequency motor; servo motor
分类号:
TG333.3
DOI:
10.19291/j.cnki.1001-3938.2018.10.009
文献标志码:
B
摘要:
以辽沈工业集团有限公司生产的管端平头倒棱机为例，简要介绍了倒棱机进给机构经历了液压型进给机构、变频电机型进给机构以及伺服电机型进给机构3个发展阶段。并对这3种类型的倒棱机进给机构的结构特点进行了分析，指出液压型进给机构结构简单，造价低廉，但其进刀不均匀，运行不稳定；变频电机型进给机构进刀均匀，运行平稳，但结构复杂，安装要求高，结构易损坏；伺服电机型进给机构部件精简，加工精度高，使用寿命长，是今后平头倒棱机进给机构主要的发展方向。
Abstract:
Taking the pipe end flat chamfering machine produced by Liaoyang Industrial Group Co., Ltd. as an example, the development history of the chamfering machine feeding mechanism was briefly introduced. The pipe end flat chamfering machine has experienced three development stages of the hydraulic type feed mechanism, the variable frequency motor type feed mechanism and the servo motor type feed mechanism. At the same time, the structural characteristics of three types of chamfering machine feed mechanism were analyzed. The results show that the hydraulic feed mechanism has a simple structure and low cost, but its feed is uneven and the operation is unstable. The variable frequency motor type feed mechanism has uniform feeding and stable operation, but the structure is complex, the installation requirements are high, and the structure is easily damaged. The servo motor type feed mechanism has the advantages of streamlined parts, high machining precision and long service life, and is the main development direction of the pipe end flat chamfering machine feeding mechanism in the future.

参考文献/References:

[1] API SPEC 5L，管线钢管规范（第45版）[S].
[2] GB/T  9711—2001，石油天然气工业管线输送系统用钢管[S].
[3] 李丽霞，杨宗强，何敏禄. 图解液压技术基础[M]. 北京：化学工业出版社，2013.
[4] 左建民. 液压与气压传动[M]. 北京：机械工业出版社，2016.[5] 周海波，熊巍. 交流电机调速及变频器技术[M]. 北京：中国电力出版社，2015.
[6] 寇宝泉，程树康. 交流伺服电机及其控制[M]. 北京：机械工业出版社，2010.
[7] 成大先. 机械设计手册[M]. 六版. 北京：化学工业出版社，2016.
[8] 叶玉驹，焦永和，张彤. 机械制图手册[M]. 北京：机械工业出版社，2012.
[9] 李必文. 机械精度设计与检测[M]. 长沙：中南大学出版社，2012.
[10] 濮良贵. 机械设计[M]. 北京：高等教育出版社，2013.

相似文献/References:

[1]江 渊,李建明,付雪强,等.倒棱机工进系统的伦茨伺服控制[J].焊管,2012,35(6):43.[doi:１００１－３９３８（２０１２）０6-0043-04]
　JIANG Yuan,LI Jian-ming,FU Xue-qiang,et al.Lenze Servo Control of Chamfering Machine Working Feed System[J].,2012,35(10):43.[doi:１００１－３９３８（２０１２）０6-0043-04]
[2]李 刚,杜强娜,张洪坤,等.倒棱机床身进给伺服控制系统的改进[J].焊管,2017,40(10):52.[doi:10.19291/j.cnki.1001-3938.2017.10.009]
　LI Gang,DU Qiangna,ZHANG Hongkun,et al.Servo Control System Improvement of Lathe Bed Feeding of Welded Pipe Chamfering Machine[J].,2017,40(10):52.[doi:10.19291/j.cnki.1001-3938.2017.10.009]

备注/Memo

备注/Memo:
收稿日期：2018-07-12
作者简介：袁启亮（1946—），男，工程师，主要从事倒棱机设计制造工作。
更新日期/Last Update: 2018-12-03