参考文献/References:
[1] WILLIAM R, OATES B. Welding Handbook[M]. Miami : American Welding Society, 2011.
[2] AMIR A S, SUSAN J. Structure Alloys for Power Plants:Operational Challenges and High-temperature Materials[M]. Cambridge : University of Cambridge, 2014.
[3] GIANFRANCESCO A. Materials for Ultra-supercritical and Advanced Ultra-supercritical Power Plants[M]. Amsterdam: Elsevier Ltd., 2017.
[4] ABSON D J, ROTHWELL J S, Review of type IV cracking of weldments in 9-12%Cr creep strength enhanced ferritic steels[J]. International Materials Reviews, 2013, 58(6): 437-473.
[5] DUPONT J N, SIEFERT J A, SHINGLEDECKER J P. Microstructural evolution and mechanical properties of Grades 23 and 24 creep strength enhanced ferritic steels[J]. Materials Reviews, 2016, 62(1): 32-56.
[6] CAMINADA S, CIPOLLA G, CUMINO A. Ferritic and austenitic grades for new generation of steam power plants[C]//Advances in materials technology for fossil power plants proceedings from the fifth International conference. Marco Island, Florida: A S M Intemational, 2008.
[7] GAND D, SHINGLEDECKER J. Advances in Materials Technology for Fossil Power Plants[M]. Marco Island, Florida: A S M Intemational, 2014.
[8] ERTEN D T, NGUYEN T T, JEONG T M, et al. Creep deformation and rupture behaviour of service exposed P91 weld and base steel measured by miniature tensile creep testing[J]. Materials at High Temperature, 2017, 34(5-6): 425-433.
[9] NONAKA I, ITO T, TAKEMASA F, et al. Full size internal pressure creep test for welded P91 hot reheat elbow[J]. International Journal of Pressure Vessels & Piping, 2007, 84(1): 97-103.
[10] KOMAI N, TOKIYOSHI T, IGARI T, et al. Experimental observation of creep damage evolution in seam-welded elbows of mod 9Cr-1Mo steel[J]. Materials at High Temperatures, 2016, 33(6): 617-625.
[11] API. Technical report 938-B: use of G.91 dteel in the oil refining industry[R]. USA: API, 2000.
[12] WRIGHT I G, DOOLEY R B. A review of the oxidation behaviour of structural alloys in steam[J]. Metallurgical Reviews, 2010, 55(3): 129-167.
[13] SCHUTZE M, SCHMIDT G T, NAJI A. Oxidation-relation life-time assessment using the new ISO standard ISO 21608: 2012 and ISO 26146: 2012[J]. Materials and Corrosion, 2016, 67(1): 13-25.
[14] SIEFERT J A, PARKER J D. Evaluation of the creep cavitation behaviour in G 91steels[J]. International Journal of Pressure Vessels & Piping, 2016(138): 31-44.
[15] LALA K, CHANDRAVATHI K S, PARAMESWARAN P, et al. Characterization of microstructures across the HAZ of the modified 9Cr-1Mo weld joint to understand its role in promoting type IV cracking[J]. Metallurgical and Materials Transactions A, 2007, 18A(1): 58-67.
[16] WANG Y, LI L. Microstructure evolution of FGHAZ in type IV failure of P91 weld[J]. Welding Journal, 2016, 95(1): 27-36.
[17] ASME-PVP. Proceedings of the Recent Developments in Chinese Codes and Standards: ASME 2012 Pressure Vessels and Piping Division conference[M]. Toronto: [s.l.], 2012.
[18] HIBBELER R C. Statics and Mechanics of Materials[M]. 北京: 机械工业出版社, 2014.
[19] MOTT R L, UNTENER J A. Applied Strength of Materials[M]. USA: CRC Press, 2017.
[20] ASM. Metal Handbook Feck Edition[M]. USA: ASM int, 1998.
[21] ABE F, TABUCHI M, KONDO M, et al. Suppression of Type IV fracture and improvement of creep strength of 9Cr steel welded joints by boron addition[J]. International Journal of Pressure Vessels & Piping, 2007, 84(1): 44-52.
[22] 何德孚. 焊接与连接工程系导论[M]. 上海: 上海交通大学出版社, 1997.
相似文献/References:
[1]郭 斌,郑 琳,董中波,等.HTP X70级热轧卷板的研究开发与应用[J].焊管,2009,32(2):14.[doi:1001-3938(2009)02-0014-03]
GUO Bin,ZHENG Lin,DONG Zhong-bo,et al.Research and Application of HTP X70 Grade Hot Rolled Coil[J].,2009,32(2):14.[doi:1001-3938(2009)02-0014-03]
[2]齐殿威,周舒野.国外X100及以上钢级管线钢专利技术简述[J].焊管,2009,32(5):65.[doi:1001-3938(2009)05-0065-05]
QI Dian-wei,ZHOU Shu-ye.Brief Introduction of the Oversea Patented Technology to Pipeline Steel X100 Grade and Above[J].,2009,32(2):65.[doi:1001-3938(2009)05-0065-05]
[3]高惠临.管线钢屈强比分析与评述[J].焊管,2010,33(6):10.[doi:1001-3938(2010)06-0010-05]
GAO Hui-lin.Analysis and Commentary on Yield Ratio of Pipeline Steel[J].,2010,33(2):10.[doi:1001-3938(2010)06-0010-05]
[4]李根全,肖凡,李志忠,等.螺旋埋弧焊管焊缝韧性[J].焊管,2010,33(8):24.[doi:1001-3938(2010)08-0024-04]
LI Gen-quan,XIAO Fan,LI Zhi-zhong,et al.Weld Toughness of SAWH Pipes[J].,2010,33(2):24.[doi:1001-3938(2010)08-0024-04]
[5]孔君华,郑琳,刘小国,等.西气东输二线工程用X80管线钢热轧板卷的组织与韧性[J].焊管,2011,34(5):5.
[6]秋荣,陈宏达,王海涛,等.西气东输二线用X80级φ1 219 mm×22.0 mm 直缝埋弧焊管质量分析[J].焊管,2013,36(1):14.[doi:1001-3938(2013)01-0014-06]
MA Qiurong,CHEN Hongda,WANG Haitao,et al.Quality Analysis on X80 φ1 219 mm×22.0 mm SAWL Pipe Used for 2nd West-east Gas Pipeline Project[J].,2013,36(2):14.[doi:1001-3938(2013)01-0014-06]
[7]王泽荫,李宗义.0Cr18Ni9Cu3型奥氏体不锈钢化学成分对焊缝质量的影响[J].焊管,2014,37(4):55.[doi:1001-3938(2014)04-0055-03]
WANG Zeyin,LI Zongyi.Influence on Weld Quality of 0Cr18Ni9Cu3 Austenitic Stainless Steel Chemical Composition[J].,2014,37(2):55.[doi:1001-3938(2014)04-0055-03]
[8]杨永磊,段 强.炼化装置安装和检修中焊接气孔产生的原因及处理方法[J].焊管,2015,38(10 ):57.[doi:1001-3938(2015)10-0057-04]
YANG Yonglei,DUAN Qiang.Welding Porosity Occurrence Reason and Processing in Refining Device Installation and Maintenance[J].,2015,38(2):57.[doi:1001-3938(2015)10-0057-04]
[9]张秀荷.不同热处理温度对D36钢焊接接头力学性能和金相组织的影响[J].焊管,2016,39(1):17.[doi:10.19291/j.cnki.1001-3938.2016.01.004]
ZHANG Xiuhe.Influence of Different Heat Treatment Temperature on the Mechanical Properties and Metallographic Structure of D36 Steel[J].,2016,39(2):17.[doi:10.19291/j.cnki.1001-3938.2016.01.004]
[10]曹 妍,王建钢,闫 波,等.L290M/X42M管线钢化学成分优化设计[J].焊管,2016,39(9):62.[doi:10.19291/j.cnki.1001-3938.2016.09.014]
CAO Yan,WANG Jiangang,YAN Bo,et al.L290M/X42M Pipeline Steel Chemical Composition Optimization Design[J].,2016,39(2):62.[doi:10.19291/j.cnki.1001-3938.2016.09.014]
[11]何德孚,王晶滢.Cr-Mo 钢管性能和制造质量控制要求评述(续)[J].焊管,2019,42(3):23.[doi:10.19291/j.cnki.1001-3938.2019.2.005]
HE Defu,WANG Jingying,An Evaluation on the Performance and Manufacturing Quality Control for Cr-Mo Steel Pipe[J].,2019,42(2):23.[doi:10.19291/j.cnki.1001-3938.2019.2.005]
[12]何德孚,王晶滢.Cr-Mo 钢管性能和制造质量控制要求评述(续)[J].焊管,2019,42(4):30.[doi:10.19291/j.cnki.1001-3938.2019.4.006]
HE Defu,WANG Jingying,An Evaluation on the Performance and Manufacturing Quality Control for Cr-Mo Steel Pipe[J].,2019,42(2):30.[doi:10.19291/j.cnki.1001-3938.2019.4.006]