[1]刘 阳,张贵锋,王士元.钛合金与不锈钢异种金属钎焊的研究进展[J].焊管,2019,42(3):1-7.[doi:10.19291/j.cnki.1001-3938.2019.3.001]
 LIU Yang,ZHANG Guifeng,WANG Shiyuan.Research Progress on Dissimilar Metal Brazing of Titanium Alloy and Stainless Steel[J].,2019,42(3):1-7.[doi:10.19291/j.cnki.1001-3938.2019.3.001]
点击复制

钛合金与不锈钢异种金属钎焊的研究进展()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
42
期数:
2019年第3期
页码:
1-7
栏目:
综述
出版日期:
2019-03-28

文章信息/Info

Title:
Research Progress on Dissimilar Metal Brazing of Titanium Alloy and Stainless Steel
文章编号:
10.19291/j.cnki.1001-3938.2019.3.001
作者:
刘 阳张贵锋王士元
西安交通大学金属材料强度国家重点实验室  焊接研究所, 西安710049
Author(s):
LIU Yang ZHANG Guifeng WANG Shiyuan
State Key Laboratory for Mechanical Behavior of Materials, Institute of Welding, Xi’an Jiaotong University,  Xi’an  710049, China
关键词:
钛合金不锈钢异种金属钎焊
Keywords:
titanium alloy stainless steel dissimilar metal brazing
分类号:
TG454
DOI:
10.19291/j.cnki.1001-3938.2019.3.001
文献标志码:
A
摘要:
为了解决钛合金焊接性能和加工性能较差导致其在实际工程应用中受限的问题,提出了将钛合金和不锈钢复合使用的构想,并对钛合金和不锈钢的可焊性进行了分析。以钛合金和不锈钢钎焊为研究对象,重点论述了钛合金与不锈钢钎焊连接所用的钎料及钎焊工艺等的国内外研究现状,发现通过钎焊来连接钛合金与不锈钢在焊接接头质量、精度以及提高焊接生产效率等方面具有一定优势,但依然存在接头强度低、特殊条件下接头性能不稳定等问题,需要从钎料设计出发,辅助钎焊工艺和设备的改进,根据不同的应用工况,设计出对应成分的钎料。
Abstract:
In order to solve the problems caused by the titanium alloy poor welding and machining performance limiting their practical engineering applications, the conception of compounding use of titanium alloy and stainless steel had been put forward, and the weldability of titanium alloy and stainless steel had been analyzed. It researched on the titanium alloy and stainless steel brazing, and mainly focused on domestic and foreign research situation of solder and brazing technology for titanium alloy and stainless steel brazing, titanium alloy and stainless steel brazing had advantages in welded joint quality, precision and improving welding production efficiency, but problems of low joint strength and unstable joint performance existed. It needed to base on solder design, improve auxiliary brazing technology and equipment, and design the solder composition according to different application conditions.

参考文献/References:

[1] 何康生, 曹雄夫. 异种金属焊接[M]. 北京:机械工业出版社, 1986.
[2] 莱茵斯C, 皮特尔斯M. 钛与钛合金[M].陈振华,严红革,陈吉华,等译. 北京:化学工业出版社, 2005.
[3] CHEN Y, CHEN S, LI L . Influence of interfacial reaction layer morphologies on crack initiation and propagation in Ti/Al joint by laser welding-brazing[J]. Materials & Design, 2010, 31(1):  227-233.
[4] 李梁, 孙健科, 孟祥军. 钛合金的应用现状及发展前景[J]. 钛工业进展, 2004, 21(5): 19-24.
[5] 彭瑾, 徐兴柱, 蓝仁恩. 巡航导弹中金属结构材料的应用[J]. 飞航导弹, 2008(3): 54-58.
[6] 苏鸿英. 钛的工业应用前景[J]. 中国有色金属, 2009(4):74-74.
[7] 张英才, 陈虹. 钛/钢复合材料热等静压扩散焊的研究[J]. 稀有金属, 1994(6): 463-466.
[8] 王敏敏, 赵永庆, 周廉. 影响钛合金蠕变行为的因素分析[J]. 稀有金属材料与工程, 2002, 31(2): 135-139.
[9] XIAN A P, SI Z Y. Interlayer design for joining pressureless sintered sialon ceramic and 40Cr steel brazing with Ag 57 Cu 38 Ti 5, filler metal[J]. Journal of Materials Science, 1992, 27(6): 1560-1566.
[10] 窦双云, 胡强年. 大型钛-钢复合板容器的焊接[J]. 焊接技术, 2008, 37(1): 27-29.
[11] 周荣林. 钛合金与00Cr18Ni10不锈钢扩散连接及界面行为研究[D]. 哈尔滨: 哈尔滨工业大学, 2002.
[12] 宋庭丰, 蒋小松, 莫德锋,等. 不锈钢和钛合金异种金属焊接研究进展[J]. 材料导报, 2015, 29(11):81-87.
[13] CHUNG T, KIM J, BANG J, et al. Microstructures of brazing zone between titanium alloy and stainless steel using various filler metals[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(增刊3): 639-644.
[14] 杨广建. 钛合金与奥氏体不锈钢的真空钎焊试验研究[D]. 合肥: 合肥工业大学, 2016.
[15] WATANABE T, HIGO Y, MIKI T, et al. Brazing of titanium with Ag-based filler metals in the air[J]. Quarterly Journal of the Japan Welding Society, 1994, 12(4):502-508.
[16] GAO Y, LI D F, HU J. Study on Brazing Alloy and Vacuum Brazing Welding Technology of TB2 Alloy/Steel[J]. Hot Working Technology, 2007, 36(15): 22-24.
[17] DONG Z H, FAN H Y. Effects of Ag-based brazing filler metals on Ti alloy/ST brazing seam[J]. Rare Metals & Cemented Carbides, 2004(3):14-17,31.
[18] 李慧芳. 钛/钢感应钎焊的AgCuZnNi钎料的研制及工艺性研究[D]. 兰州: 兰州理工大学, 2013.
[19] LEE J G, HONG S J, LEE M K, et al. High strength bonding of titanium to stainless steel using an Ag interlayer[J]. Journal of Nuclear Materials, 2009, 395(1): 145-149.
[20] 马驰原. Ni层对钛/钢钎焊接头组织和性能的影响机制[D]. 兰州: 兰州理工大学, 2014.
[21] SHIUE R K, WU S K, SHIUE J Y. Infrared brazing of Ti-6Al-4V and 17-4 PH stainless steel with (Ni)/Cr barrier layer(s)[J]. Materials Science & Engineering A, 2008, 488(1): 186-194.
[22] 杨仲林. 钛合金/钢异种金属真空钎焊试验研究[D].大连: 大连理工大学, 2013.
[23] 杨静, 王飞, 朱金霞,等. Ag95CuNiLi钎料钎焊钛合金与不锈钢异种金属的性能分析:Ⅱ钎焊性分析[J]. 焊接学报, 2004, 25(1): 48-51.
[24] YUE X, HE P, FENG J C, et al. Microstructure and interfacial reactions of vacuum brazing titanium alloy to stainless steel using an AgCuTi filler metal[J]. Materials Characterization, 2008, 59(12): 1721-1727.
[25] 刘士磊. 非晶钎料真空钎焊TC4钛合金及不锈钢的研究[D]. 郑州: 郑州大学, 2017.
[26]  TASHI R S, MOUSAVI S A A A , ATABAKI M M. Diffusion brazing of Ti-6Al-4V and stainless steel 316L using AgCuZn filler matel [J].Association of Metallurgical Engineers of Serbia, 2013, 19(3): 189-201.
[27] 祁凯, 于治水, 李瑞峰. 1Cr18Ni9Ti不锈钢/Ti6Al4V钛合金真空钎焊工艺研究[J]. 热加工工艺, 2011, 40(19): 162-164.
[28] 张汇文. TC4钛合金与1Cr18Ni9Ti不锈钢钎焊工艺研究[D]. 哈尔滨: 哈尔滨工业大学, 2006.
[29] 薛忠明, 王奇娟, 曲文卿, 等. 钛合金与不锈钢高频感应钎焊工艺试验研究[J]. 航天制造技术, 2004(6):33-37.
[30] 王国建, 周健勇, 孙东,等. 工艺参数对TC4与1Cr18Ni9Ti不锈钢钎焊接头性能的影响[C]// 全国钎焊及特种连接技术交流会. 郑州: [s.l.],2009.

相似文献/References:

[1]耿开博.铝管、不锈钢管的高频感应焊接[J].焊管,2009,32(11):29.[doi:1001-3938(2009)11-0029-03]
 GENG Kai-bo.High-frequency Induction Welding of Aluminum and Stainless Steel Pipes[J].,2009,32(3):29.[doi:1001-3938(2009)11-0029-03]
[2]蒋道顶,王宝金,陈 泽.轨道客车车顶架用多功能不锈钢异形管成型工艺设计[J].焊管,2011,34(11):42.[doi:1001-3938(2011)11-0042-04]
 JIANG Dao-ding,WANG Bao-jin,CHEN Ze.Forming Process Design of Multifunctional Stainless Steel Special Pipe Used in the Ceiling Rack of Railway Passenger Train[J].,2011,34(3):42.[doi:1001-3938(2011)11-0042-04]
[3]张希川,李 健,张瑞涛,等.管道内壁不锈钢焊条堆焊的耐腐蚀工艺研究[J].焊管,2012,35(8):9.[doi:1001-3938(2012)08-0009-04]
 ZHANG Xichuan,LI Jian,ZHANG Ruitao,et al.Research on Corrosion Resistance Process of Stainless Steel Electrode Overlaying Welding on the Inner Wall of Pipeline[J].,2012,35(3):9.[doi:1001-3938(2012)08-0009-04]
[4]吴通良.超长奥氏体不锈钢焊管光亮固溶处理工艺改进[J].焊管,2013,36(7):34.[doi:1001-3938(2013)06-0034-04]
 WU Tongliang.Super-long Austenitic Stainless Steel Welded Steel Pipe Continuous Bright Bolid Solution Treatment Process Improvement[J].,2013,36(3):34.[doi:1001-3938(2013)06-0034-04]
[5]付现桥,徐 敬,卜明哲,等.L360QS/316L不锈钢复合钢管焊接工艺和性能研究[J].焊管,2014,37(2):48.[doi:1001-3938(2014)02-0048-05]
 Fu Xianqiao,XU Jing,BU Mingzhe,et al.Welding Process and Performance Study on L360QS/316L Stainless Steel Clad Pipe[J].,2014,37(3):48.[doi:1001-3938(2014)02-0048-05]
[6]陈茂军,靳全胜.TIG焊接不锈钢管工艺对焊缝质量的影响[J].焊管,2014,37(7):46.[doi:1001-3938(2014)07-0046-03]
 CHEN Maojun,JIN Quansheng.Influence of TIG Welding Process for Stainless Steel Tube on Weld Quality[J].,2014,37(3):46.[doi:1001-3938(2014)07-0046-03]
[7]雷晓维,冯耀荣,张建勋,等.不锈钢焊接接头腐蚀行为研究进展[J].焊管,2015,38(2):37.[doi:1001-3938(2015)02-0037-05]
 LEI Xiaowei,FENG Yaorong,ZHANG Jianxun,et al.Research Progress of Corrosion Behavior of Stainless Steels Welded Joints[J].,2015,38(3):37.[doi:1001-3938(2015)02-0037-05]
[8]杨 凯,王永军,云海涛,等.TC4钛合金薄壁圆管纵缝TIG焊接模拟与分析[J].焊管,2015,38(7):6.[doi:1001-3938(2015)07-0006-05]
 YANG Kai,WANG Yongjun,YUN Haitao,et al.Simulation and Analysis on Longitudinal TIG Welding of TC4 Titanium Alloy Thin-walled Circular Tube[J].,2015,38(3):6.[doi:1001-3938(2015)07-0006-05]
[9]潘 强,刘尔玺,冯淳元,等.Q235钢板表面堆焊不锈钢改性处理[J].焊管,2017,40(4):22.[doi:10.19291/j.cnki.1001-3938.2017.04.005]
 PAN Qiang,LIU Erxi,FENG Chunyuan,et al.Q235 Steel Plate Surface Overlaying Stainless Steel Modified Process[J].,2017,40(3):22.[doi:10.19291/j.cnki.1001-3938.2017.04.005]
[10]张 峰,等.钛合金油井管应用研究现状及进展[J].焊管,2017,40(11):7.[doi:10.19291/j.cnki.1001-3938.2017.11.002]
 ZHANG Feng,HUANG Wenke,LI Yuanzheng,et al.Application Research Status and Progresses of Titanium Alloy OCTG[J].,2017,40(3):7.[doi:10.19291/j.cnki.1001-3938.2017.11.002]
[11]许贵芝 编译.不锈钢与钛合金的转接管的焊接[J].焊管,2009,32(11):70.[doi:1001-3938(2009)11-0070-03]
 Edited and Translated by XU Gui-zhi.Welding Between Stainless Steel and Titanium Alloy Different Diameter Transfer Tube[J].,2009,32(3):70.[doi:1001-3938(2009)11-0070-03]

备注/Memo

备注/Memo:

收稿日期:2018-12-24

作者简介:刘 阳(1994—),男,硕士,目前主要从事钛合金与异种金属及金属基复合材料的钎焊研究。

更新日期/Last Update: 2019-04-19