[1]李利巍,徐进桥,邹 航,等.大输量天然气管道工程用特厚壁X80M热轧板卷的开发[J].焊管,2019,42(7):72-77.[doi:10.19291/j.cnki.1001-3938.2019.7.008]
 LI Liwei,XU Jinqiao,ZOU Hang,et al.Development of Extra Thick Wall X80M Hot-rolled Coil for Large Transportation Capacity Natural Gas Pipeline Project[J].,2019,42(7):72-77.[doi:10.19291/j.cnki.1001-3938.2019.7.008]
点击复制

大输量天然气管道工程用
特厚壁X80M热轧板卷的开发
()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
42
期数:
2019年第7期
页码:
72-77
栏目:
会议专辑
出版日期:
2019-07-28

文章信息/Info

Title:
Development of Extra Thick Wall X80M Hot-rolled Coil for
 Large Transportation Capacity Natural Gas Pipeline Project
文章编号:
10.19291/j.cnki.1001-3938.2019.7.008
作者:
李利巍徐进桥邹 航崔 雷徐 锋杨海林岳江波
武汉钢铁有限公司, 武汉 430080
Author(s):
LI Liwei XU Jinqiao ZOU Hang CUI Lei XU Feng YANG Hailin YUE Jiangbo
Wuhan Iron & Steel Co., Ltd., Wuhan 430080, China
关键词:
管线钢X80M特厚壁低温韧性组织
Keywords:
pipeline steel X80M extra thick-wall low temperature toughness microstructure
分类号:
TG113
DOI:
10.19291/j.cnki.1001-3938.2019.7.008
文献标志码:
A
摘要:
针对中俄东线等大输量天然气管道工程用X80钢级螺旋埋弧焊管对热轧板卷提出的技术要求,介绍了武汉钢铁有限公司21.4 mm特厚壁X80M热轧板卷的成分工艺设计,统计分析了批量生产X80M热轧板卷的化学成分、力学性能、低温韧性和显微组织,以及钢管的低温韧性。结果表明:武汉钢铁有限公司为中俄东线天然气管道工程开发的螺旋埋弧焊管用21.4 mm特厚壁X80热轧板卷组织为细小均匀的针状铁素体+弥散分布的M/A岛,低温韧性优异,各项理化性能全部满足管道工程技术标准要求。
Abstract:
Aiming at the technical requirements of the hot-rolled coil for X80 spiral submerged arc welded pipe of China-Russia east natural gas pipeline and other large transportation capacity natural gas pipeline project, the composition process design of 21.4 mm extra thick-wall X80M hot-rolled coil in WISCO is introduced,and the chemical composition, mechanical properties, low temperature toughness and microstructure of X80M hot-rolled coil and low temperature toughness of steel pipe were analyzed statistically. The results showed that the microstructure of 21.4 mm extra thick-wall X80M hot-rolled coil in WISCO for China-Russia east natural gas pipeline were fine uniform acicular ferrite and diffusely distributed M/A constituent with excellent low temperature toughness, and all physical and chemical properties fully meet the requirements of pipeline engineering technical standards.

参考文献/References:

[1] 国家统计局. 中国统计年鉴2018[M]. 北京: 中国统计出版社, 2018.
[2] BRUSCHI R, BIERY N, MARCHESANI F, et al. Long distance gas pipelines: adopting high grade line pipe,cost benefit versus reliability[C]∥Pipeline Technology Conference.  Hannover: EITEP, 2009: 15-17.
[3] 王畇润. 天然气管道增输技术[J]. 油气田地面工程, 2014(5): 11-12.
[4] 孔君华, 郑琳, 刘小国, 等. 西气东输二线用X80管线钢热轧卷板的组织与韧性[J]. 焊管, 2011(5): 5-11.
[5] 王占黎, 单蕾, 孙慧,  等. 中国天然气行业2014年发展与2015年展望[J]. 国际石油经济, 2015(6): 37-43.
[6] 王小强, 王保群, 王博, 等. 我国长输天然气管道现状及发展趋势[J]. 石油规划设计, 2018(9): 1-6.
[7] 张振永, 孟献强, 孙学军, 等. 中俄东线站场工艺管道用高钢级低温钢管韧性指标[J]. 油气储运, 2018(4):435-441.
[8] 毕宗岳,黄晓辉,牛辉,等. 国产X80大直径厚壁螺旋埋弧焊管开发[J]. 焊管,2016(2):22-28.
[9] 毕宗岳, 黄晓辉, 牛辉, 等. X80级Φ1 422 mm×21.4 mm大直径厚壁焊管的研发及性能研究[J]. 焊管, 2017(4): 1-7.
[10] 王春明, 鲁强, 吴杏芳, 等. 管线钢的合金设计[J]. 鞍钢技术, 2004(6): 22-28.
[11] 郝瑞辉, 高惠临, 丛晖,等. 合金元素在管线钢中的作用与控制[J]. 上海金属, 2006(1):58-62.
[12] 郑磊. 宝钢管线钢的发展回顾[J]. 焊管, 2005(1): 1-5.
[13] XIAO Longyang, YUN Boxu, XIAO Dongtan, et al. Influences of crystallography and delamination on anisotropy of Charpy impact toughness in API X100 pipeline steel[J]. Materials Science & Engineering A, 2014(607): 53-62.
[14] 刘觐, 孟利, 朱国辉, 等. 管线钢中晶界取向差特征分布分析[J]. 材料热处理学报, 2014, 35(3): 111-116.
[15] 阮红志, 赵爱民, 赵征志, 等. 高钢级X100管线钢中的M-A岛[J]. 北京科技大学学报, 2013(4): 474-476.

相似文献/References:

[1]李新华,罗金恒,赵新伟,等.高钢级管线钢失效评估曲线研究[J].焊管,2007,30(4):33.[doi:1001-3938(2007)04-0033-03]
 LI Xin-hua,LUO Jin-heng,ZHAO Xin-wei,et al.Research on Failure Assessment Curves of High Grade Pipeline Steel[J].,2007,30(7):33.[doi:1001-3938(2007)04-0033-03]
[2]宫少涛,王爱民,吉玲康,等.X80与X100级管线钢屈服强度Rt 0.5与Rp 0.2的差异性研究[J].焊管,2007,30(5):42.[doi:1001-3938(2007)05-0042-03]
 GONG Shao-tao,WANG Ai-min,JI Ling-kang,et al.Study on Difference Between Yield Strength Rt 0.5 and Rp 0.2 for X80 and X100 Pipelines Steel[J].,2007,30(7):42.[doi:1001-3938(2007)05-0042-03]
[3]刘庆才,李 东,黎剑锋.影响输气管线钢管抗H2S性能主要因素的探讨[J].焊管,2007,30(5):54.[doi:1001-3938(2007)05-0054-05]
 LIU Qing-cai,LI Dong,LI Jian-feng.Key Factors Affecting Sour Service Ability of Welded Pipe and Its Domestic Production[J].,2007,30(7):54.[doi:1001-3938(2007)05-0054-05]
[4]王树人,崔志新.管线钢落锤撕裂试验异常脆性断口分析[J].焊管,2007,30(6):69.[doi:1001-3938(2007)06-0069-03]
 WANG Shu-ren? CUI Zhi-xin.Analysis on Abnormal Brittle Fracture of DWTT for Pipeline Steel[J].,2007,30(7):69.[doi:1001-3938(2007)06-0069-03]
[5]陶 鹏,张 弛,杨志刚,等.高钢级管线钢的组织和力学性能[J].焊管,2008,31(2):19.[doi:1001-3938(2008)02-0019-04]
 TAO Peng,ZHANG Chi,YANG Zhi-gang,et al.The Microstructure and Mechanical Property of X70,X80 and X100 Grade Pipeline Steel[J].,2008,31(7):19.[doi:1001-3938(2008)02-0019-04]
[6]黄明浩,徐 烽,黄国建.影响管线钢屈强比的因素探讨[J].焊管,2008,31(3):20.[doi:1001-3938(2008)03-0020-04]
 HUANG Ming-hao,XU Feng,HUANG Guo-jian.Discussion on Influencing Factors of Yield Ratio for Pipeline Steel[J].,2008,31(7):20.[doi:1001-3938(2008)03-0020-04]
[7]牛 辉,余大涛,高惠临.管线钢焊接热影响区的组织预测[J].焊管,2008,31(3):28.[doi:1001-3938(2008)03-0028-05]
 NU Hui,YU Da-tao,GAO Hui-lin.Structure Forecast of Pipeline Steel Welding Heat Affected Zone[J].,2008,31(7):28.[doi:1001-3938(2008)03-0028-05]
[8]孔君华,郑 琳,关 云,等.西气东输二线工程用18.4 mm厚 X80级热轧板卷生产实践[J].焊管,2008,31(6):50.[doi:1001-3938(2008)06-0050-04]
 KONG Jun-hua,ZHENG Ling,GUAN Yun,et al.Production Experience of X80 Grade Hot Rolled Coil with 18.4 mm Thickness Used〖JZ〗for the Second West to East Gas Pipeline Project[J].,2008,31(7):50.[doi:1001-3938(2008)06-0050-04]
[9]黄国建,张英慧,孔祥磊,等.特厚规格X70和X80级热轧卷板的开发与应用[J].焊管,2009,32(2):17.[doi:1001-3938(2009)02-0017-06]
 HUANG Guo-jian,ZHANG Ying-hui,KONG Xiang-lei,et al.Development and Application of X70 & X80 Grade HRC with Heavy Thickness[J].,2009,32(7):17.[doi:1001-3938(2009)02-0017-06]
[10]杨专钊,李云龙,邓波,等.管线钢拉伸试验中异常屈服强度研究与分析[J].焊管,2009,32(4):51.[doi:1001-3938(2009)04-0051-03]
 YANG Zhuan-zhao,LI Yun-long,DENG Bo,et al.Research and Analysis of Abnormal Yield Strength during Tensile Test of Pipeline Steel[J].,2009,32(7):51.[doi:1001-3938(2009)04-0051-03]

备注/Memo

备注/Memo:

收稿日期:2019-01-08

基金项目: 湖北省中央引导地方科技发展专项“海洋耐腐蚀高强度管线钢制造技术创新平台”(项目编号2018ZYYD026)。
作者简介:李利巍(1981—),高级工程师,武钢有限公司技术中心热轧所首席研究员,主要从事管线用钢等热轧产品研发工作。

更新日期/Last Update: 2019-08-16