[1]陈晓强,马 震,潘 爽,等.水下湿法焊接远程遥控装置设计及使用方法[J].焊管,2019,42(9):52-55,63.[doi:10.19291/j.cnki.1001-3938.2019.9.010]
 CHEN Xiaoqiang,MA Zhen,PAN Shuang,et al.Design and Operational Using Method of Romote Control Device in Underwater Welding[J].,2019,42(9):52-55,63.[doi:10.19291/j.cnki.1001-3938.2019.9.010]
点击复制

水下湿法焊接远程遥控装置
设计及使用方法
()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
42
期数:
2019年第9期
页码:
52-55,63
栏目:
工艺与设备
出版日期:
2019-09-28

文章信息/Info

Title:
Design and Operational Using Method of Romote Control Device in
Underwater Welding
文章编号:
10.19291/j.cnki.1001-3938.2019.9.010
作者:
陈晓强马 震潘 爽李晓虹王 帅
海军潜艇学院, 山东 青岛  266042
Author(s):
CHEN Xiaoqiang MA Zhen PAN Shuang LI Xiaohong WANG Shuai
Naval Submarine Academy of PLA, Qingdao 266042, Shandong, China
关键词:
水下湿法焊接远程遥控响应时间
Keywords:
underwater wet welding romote control device response time
分类号:
TG456.5
DOI:
10.19291/j.cnki.1001-3938.2019.9.010
文献标志码:
B
摘要:
为保护水下焊接人员的人身安全,提高焊接电源通断相应时间,设计开发了一种水下湿法焊接远程遥控装置,该装置由水下开关组件、水密通讯电缆、陆上控制组件与信号输出插头等构成,可以实现由潜水员在水下自主操作焊接电源的通断,最大限度地缩短响应时间。实际应用结果表明,与传统的大功率闸刀相比,水下湿法焊接远程遥控装置的指令响应速度由2~4 s缩短到0.2 s以内,焊接过程中没有出现麻电现象和拉弧现象,为水下作业提供安全保障和便利。
Abstract:
In order to protect the personal safety of underwater welders, high-power knife switch is usually used to cut off the welding circuit in the underwater wet welding process to realize on-off control of the welding process.  This method has some disadvantages such as slow response speed and poor security. Due to lack of the technique on controlling power supply and break, the equipment composition and operational using method of romote control device for underwater welding are introduced in the paper. The diver can control the power supply and break himself with the help of this romote control device under water. The response time can be shortened, electrical safety and convenience for underwater operating can be provided.

参考文献/References:

[1] 周利, 刘一搏, 郭宁, 等. 水下焊接技术的研究发展现状[J]. 电焊机, 2012, 42(11): 6-10.
[2] ROWE M, LIU S. Recent developments in underwater wet welding[J]. Science and Technology of Welding & Joining, 2001, 6(6): 387-396.
[3] LIZUNKOVA Y, HASSEL T, KLOTZ J, et al. Development of filler wire for underwater welding as a repair tool for adaptation on AUV[C]//Oceans 2009 IEEE Bremen. Bremen, Germany: [s.n.], 2009: 1-6.
[4] 朱加雷, 俞建荣, 焦向东,等. 水下焊接技术研究和应用的进展[J]. 焊接技术, 2005, 34(4): 1-3.
[5] 陈英, 许威, 马洪伟, 等. 水下焊接技术研究现状和发展趋势[J]. 焊管, 2014(5): 29-34.
[6] 焦向东, 朱加雷. 海洋工程水下焊接自动化技术应用现状及展望[J]. 金属加工(热加工), 2013(2): 24-26.
[7] 段宇, 唐耀, 陈晓强. 水下焊割作业中触电原因与防护方法[J]. 焊接技术, 2013(8): 76-79.
[8] GB 16636—2008, 潜水员水下用电安全规程[S].
[9] GB 4208—2004, 外壳防护等级[S].
[10] 刘海滨, 陈晓强. 水下焊接与切割技术应用及发展研究[J]. 大坝与安全, 2008(1): 68-71.
[11] 杜永鹏, 袁新, 贾传宝, 等.水下湿法手工电弧焊焊接设备特性研究[J]. 焊管, 2012(5): 40-43.
[12] 王春芳, 王兆安, 王开艳. 弧焊逆变器主电路的改进和实验验证[J]. 电力电子技术, 2010, 44(7): 51-52.
[13] 陈树君, 卢振洋, 殷树言,等. 弧焊逆变电源的输入性能分析与滤波电路参数优化[J]. 电焊机, 2004, 34(6): 36-40.
[14] 胡群荣. 大功率电力电子开关用于配电变压器无弧有载调压方案[J]. 电子世界, 2013, 30(24): 46-46.
[15] 毕耀宗. 纳米晶在逆变焊机上的应用[J]. 现代焊接, 2003(6): 57-58.

相似文献/References:

[1]杜永鹏,郭 宁,刘志强,等.水下湿法焊接工艺在沉船打捞工程中的应用[J].焊管,2015,38(4):43.[doi:1001-3938(2015)04-0043-05]
 DU Yongpeng,GUO Ning,LIU Zhiqiang,et al.Application of Underwater Wet Welding in Sunken Vessel Salvage Engineering[J].,2015,38(9):43.[doi:1001-3938(2015)04-0043-05]

备注/Memo

备注/Memo:

收稿日期:2019-05-03

作者简介:陈晓强(1976—),男,硕士,副教授,主要从事水下焊接与切割技术方面的研究及教学工作,已发表论文20余篇。

更新日期/Last Update: 2019-10-24