[1]肖 虎,刘宏亮,杨 艳,等.水下采油树输油管线制造技术[J].焊管,2019,42(10):64-68.[doi:10.19291/j.cnki.1001-3938.2019.10.013]
 XIAO Hu,LIU Hongliang,YANG Yan,et al.Manufacturing Technology of Subsea Production Tree Oil Pipeline[J].,2019,42(10):64-68.[doi:10.19291/j.cnki.1001-3938.2019.10.013]
点击复制

水下采油树输油管线制造技术()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
42
期数:
2019年第10期
页码:
64-68
栏目:
经验交流
出版日期:
2019-10-28

文章信息/Info

Title:
Manufacturing Technology of Subsea Production Tree Oil Pipeline
文章编号:
10.19291/j.cnki.1001-3938.2019.10.013
作者:
肖 虎1刘宏亮12杨 艳1李晓康1王海峰1
1. 宝鸡石油机械有限责任公司, 陕西 宝鸡 721002;
2. 国家油气钻井装备工程技术研究中心, 陕西 宝鸡 721002
Author(s):
XIAO Hu1 LIU Hongliang1 2 YANG Yan1 LI Xiaokang1 WANG Haifeng1
1. CNPC Baoji Oilfield Machinery Co., Ltd., Baoji 721002, Shaanxi, China;
2. National Engineering Center for Oil & Gas Drilling Equipment, Baoji 721002, Shaanxi, China
关键词:
输油管线管双相不锈钢制造技术壁厚减薄率焊接工艺
Keywords:
oil pipeline  duplex stainless steel manufacturing technology wall thickness reduction rate welding technology
分类号:
TG457.6
DOI:
10.19291/j.cnki.1001-3938.2019.10.013
文献标志码:
B
摘要:
针对水下采油树S32205双相不锈钢输油管线管壁厚大、材料特殊、精度要求高、服役环境恶劣、制造难度大等特点,从弯管技术、组对技术和焊接技术等方面对其制造难点进行了研究。制定了中频感应加热弯管工艺及壁厚减薄率控制要求,设计了管线专用组合工装及基于管线全位置的组合焊焊接工艺方案(钨极氩弧焊(GTAW)+焊条电弧焊(SMAW)),并进行了相关力学性能试验。试验结果表明,采用合理的弯管工艺、工装设计及焊接工艺生产的采油树各项性能满足设计要求。
Abstract:
In view of the thick wall, special material, high precision requirement, bad service environment and difficult manufacturing of S32205 duplex stainless steel pipeline for underwater oil production, the manufacturing difficulties of S32205 duplex stainless steel pipeline are studied from the aspects of bending technology, pairing technology and welding technology. Medium frequency induction heating pipe bending process and wall thickness reduction rate control requirements were formulated, special assembly tooling for pipeline and combined welding process scheme based on full position of pipeline (GTAW+SMAW) were designed, and related mechanical properties were tested. The test results show that the functions of the production tree can meet the design requirements by adopting reasonable pipe bending technology, tooling design and welding technology.

相似文献/References:

[1]赵海鸿,祁励春.00Cr22Ni5Mo3N双相不锈钢焊接工艺研究[J].焊管,2008,31(1):29.[doi:1001-3938(2008)01-0029-04]
 ZHAO Hai-hong,QI Li-chun.Study on Welding Process of 00Cr22Ni5Mo3N Duplex Stainless Steel[J].,2008,31(10):29.[doi:1001-3938(2008)01-0029-04]
[2]韩志诚,王少刚,徐凤林,等.双相不锈钢的焊接研究进展[J].焊管,2008,31(3):5.[doi:1001-3938(2008)03-0005-04]
 HAN Zhi-cheng,WANG Shao-gang,XU Feng-lin,et al.Progress of Research on Welding of Duplex Stainless Steel[J].,2008,31(10):5.[doi:1001-3938(2008)03-0005-04]
[3]马启慧,王少刚,张亮,等.双相不锈钢与碳钢异种金属焊接研究综述[J].焊管,2009,32(8):26.[doi:1001-3938(2009)08-0026-05]
 MA Qi-hui,WANG Shao-gang,ZHANG Liang,et al.Review of Dissimilar Metal Welding Between Duplex Stainless Steel and Carbon Steel[J].,2009,32(10):26.[doi:1001-3938(2009)08-0026-05]
[4]谢树军,杨清.A790 S31803双相不锈钢焊接接头耐腐蚀性能研究[J].焊管,2012,35(12):25.[doi:1001-3938(2012)12-0025-04]
 YANG Qing,XIE Shujun.Study on Corrosion Resistance of A790 S31803 Duplex Stainless Steel Welded Joint[J].,2012,35(10):25.[doi:1001-3938(2012)12-0025-04]
[5]宋立新,李美艳,王永兴.一种双相不锈钢焊接接头的组织及腐蚀性能[J].焊管,2014,37(4):26.[doi:1001-3938(2014)04-0026-04]
 SONG Lixin,LI Meiyan,WANG Yongxing.Microstructure and Corrosion Property of Welding Joint of A Duplex Phase Stainless Steel[J].,2014,37(10):26.[doi:1001-3938(2014)04-0026-04]
[6]何德孚,王晶滢.厚壁双相不锈钢焊管的焊接方法和相平衡控制[J].焊管,2015,38(2):19.[doi:1001-3938(2015)02-0019-13]
 HE Defu,WANG Jingying.Welding Method and Phase Balance Control for Thick Wall Duplex Stainless Steel Pipe[J].,2015,38(10):19.[doi:1001-3938(2015)02-0019-13]
[7]代绪成,朱秀文,孙小磊,等.UNS31803双相不锈钢氩弧焊焊接接头性能研究[J].焊管,2018,41(1):1.[doi:DOI: 10.19291/j.cnki.1001-3938.2018.01.001]
 DAI Xucheng,ZHU Xiuwen,SUN Xiaolei,et al.Research on Properties of GTAW for UNS31803 Duplex Stainless Steel Welded Joint[J].,2018,41(10):1.[doi:DOI: 10.19291/j.cnki.1001-3938.2018.01.001]
[8]何德孚,王晶滢.双相不锈钢钢管性能控制的新途径——亚稳界分解热处理(上)[J].焊管,2018,41(7):1.[doi:10.19291/j.cnki.1001-3938.2018.07.001]
 HE Defu,WANG Jingying.A New Way for Duplex Stainless Steel Pipe Performance Control—Spinodal Decomposition Heat Treatment(Ⅰ)[J].,2018,41(10):1.[doi:10.19291/j.cnki.1001-3938.2018.07.001]
[9]毕宗岳.2205/X65冶金复合管材焊接工艺及焊缝组织性能研究[J].焊管,2019,42(2):1.[doi:10.19291/j.cnki.1001-3938.2019.2.001]
 BI Zongyue,Welding Process and Microstructure and Mechanical Property of Butt Joints of 2205/X65 Metallurgical Clad Pipe[J].,2019,42(10):1.[doi:10.19291/j.cnki.1001-3938.2019.2.001]

备注/Memo

备注/Memo:

收稿日期: 2018-12-11

基金项目: 国家高技术研究发展计划(863计划)项目“水下卧式采油树系统研制”(项目编号2012AA09A204)。
作者简介:肖  虎(1985—), 男, 工程师, 现主要从事石油钻采装备钢结构件工艺设计工作。

更新日期/Last Update: 2019-11-26