[1]周好斌,付新宇,刘嘉琪,等.梯子梁自动焊接生产线设计[J].焊管,2019,42(12):51-54.[doi:10.19291/j.cnki.1001-3938.2019.12.010]
 ZHOU Haobin,FU Xinyu,LIU Jiaqi,et al.Design of Ladder Beam Automatic Welding Production Line[J].,2019,42(12):51-54.[doi:10.19291/j.cnki.1001-3938.2019.12.010]
点击复制

梯子梁自动焊接生产线设计()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
42
期数:
2019年第12期
页码:
51-54
栏目:
经验交流
出版日期:
2019-12-28

文章信息/Info

Title:
Design of Ladder Beam Automatic Welding Production Line
文章编号:
10.19291/j.cnki.1001-3938.2019.12.010
作者:
周好斌付新宇刘嘉琪单 航
西安石油大学 材料科学与工程学院,西安 710065
Author(s):
ZHOU Haobin FU Xinyu LIU Jiaqi SHAN Hang
School of Materials Science and Engineering,Xi’an Shiyou University, Xi’an 710065, China
关键词:
自动焊接生产线梯子梁PLC
Keywords:
automatic welding production line ladder beam PLC
分类号:
TG409
DOI:
10.19291/j.cnki.1001-3938.2019.12.010
文献标志码:
B
摘要:
针对目前梯子梁生产采用的手工焊接质量不稳定、易产生缺陷的现状,设计了一种基于PLC控制的梯子梁自动焊接生产线,以实现多种批次梯子梁的全自动生产。本研究提出了生产线设计中存在的主要问题及解决思路,并对关键位置的设计进行了阐述。通过对短节自动上料装置、钢筋传送速度匹配装置及梯子梁自动剪切装置的设计,实现了全自动下料、焊接和成品出料功能,保证了生产线的全自动生产。生产实践表明,所设计的生产线能够实现步进焊接和自动连续生产,生产的梯子梁外观平整,焊接点的稳定性及抗剪性能满足技术要求,生产效率高。
Abstract:
In view of the present situation that the production of the ladder beam mainly adopts the manual welding,which makes the quality unstable and easy to produce defects,an automatic welding production line of the ladder beam based on PLC programming control is designed to realize the automatic production of many batches of ladder beam. This paper presents the main problems and solutions in the design of the production line,and expounds the design of the key position. Through the design of the short joint automatic feeding device,steel bar transfer speed matching device and ladder beam automatic shearing device,the functions of the automatic feeding,welding and the finished product discharging are realized,and the production line is fully automatic. The production line can realize the step welding and automatic continuous production. The appearance of ladder beam is smooth and consistent,the stability of welding points and shear resistance meet the technical requirements,which makes the production efficiency high.

参考文献/References:

[1] 杨浩,孟凡军,孙阳,等. 自动电阻焊技术在梯子梁制造中的应用[J]. 新技术新工艺,2013(6):100-101.
[2] 王锡龙. 大网格非等径钢筋网自动焊接设备的设计[D]. 兰州:兰州理工大学,2010.
[3] 武亚鹏,侯建伟. 国内自动化焊接设备在中厚板领域中的发展及应用[J]. 金属加工(热加工),2012(22):15-18,22.
[4] 黄仁青. 高速多线程剪卷焊一体化钢带生产线的设计[D]. 天津:天津大学,2012.
[5] 郭瑞鹏,杨战利,李远. 电阻焊在工业生产中的应用及发展现状[J]. 机械制造文摘(焊接分册),2015(1):35-38.
[6] 秦禹,卫进. 梯子梁电阻焊接生产线的研制[J]. 电焊机,2014,44(11):119-122.
[7] 孙阳,孟凡军,何毅,等. 基于PLC和伺服控制技术的梯子梁自动焊接平台控制系统[J]. 新技术新工艺,2013(2):110-114.
[8] 韩召. 矿山支护用桁架自动成型及焊接设备的研发设计[D]. 兰州:兰州理工大学,2008.
[9] 李东光. 焊接自动化技术及其发展探讨[J]. 中国高新技术企业,2015(20):78-79.
[10] 罗宇. 矿用智能焊接技术及装备研究[J]. 煤炭工程,2018,50(10):146-149.
[11] 赵雷,张华. 气门锥面磨床全自动气动送料系统设计[J]. 现代机械,2016(3):66-68.
[12] 翟德山. 玻璃模具等离子焊自动生产线的研发[D]. 南京:东南大学,2016.
[13] 金燕,刘少军. 圆盘类零件加工自动上下料系统设计[J]. 机床与液压,2018(16):41-44.
[14] 王文军. 自动焊接机在机械焊接中的应用[J]. 山东工业技术,2018(7):51.
[15] 石清芳,杨民. 电阻点焊常见质量缺陷及返修方法[J]. 企业科技与发展,2014(13):24-26.
[16] 李世军,王晓明. 网架杆件专用半自动焊接机床的设计与实践[J]. 机床与液压,2004(3):68-69.

备注/Memo

备注/Memo:
收稿日期:2019-11-10
作者简介:周好斌(1965―),男,博士,教授,研究方向为材料焊接工艺及设备、材料成型加工设备的自动化控制技术。
更新日期/Last Update: 2020-01-16