[1]马朝辉,毛浓召,屈利华,等.基于壳牌标准的螺旋埋弧焊管超声波探伤设备改造[J].焊管,2020,43(6):39-43.[doi:10.19291/j.cnki.1001-3938.2020.06.007]
 MA Zhaohui,MAO Nongzhao,QU Lihua,et al.Ultrasonic Flaw Detection Equipment Transformation of Spiral Submerged Arc Welded Pipe Based on Shell Standard[J].,2020,43(6):39-43.[doi:10.19291/j.cnki.1001-3938.2020.06.007]
点击复制

基于壳牌标准的螺旋埋弧焊管超声波探伤设备改造()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
43
期数:
2020年第6期
页码:
39-43
栏目:
工艺与设备
出版日期:
2020-06-28

文章信息/Info

Title:
Ultrasonic Flaw Detection Equipment Transformation of
Spiral Submerged Arc Welded Pipe Based on Shell Standard
文章编号:
10.19291/j.cnki.1001-3938.2020.06.007
作者:
马朝辉毛浓召屈利华席少鹏胡绪波王振华苟世峰常永乐
宝鸡石油钢管有限责任公司,陕西 宝鸡 721008
Author(s):
MA Zhaohui MAO Nongzhao QU Lihua XI ShaopengHU Xubo WANG Zhenhua GOU Shifeng CHANG Yongle
Baoji Petroleum Steel Pipe Co.,Ltd.,Baoji 721008,Shaanxi,China
关键词:
壳牌标准螺旋埋弧焊管自动超声探伤对比样管
Keywords:
Shell standardspiral submerged arc welded pipeautomatic ultrasonic flaw detectionsample pipe comparison
分类号:
TH878.2
DOI:
10.19291/j.cnki.1001-3938.2020.06.007
文献标志码:
B
摘要:
为了实现大壁厚螺旋埋弧焊管焊缝超声波探伤100%覆盖扫查,对螺旋埋弧焊管自动超声波探伤的几种标准进行了对比,重点分析了壳牌管线钢管标准DEP 31.40.20.37-Gen与其他标准不同之处,以及对螺旋埋弧焊管自动超声波探伤设备的要求,明确了不同壁厚钢管执行壳牌标准时焊缝探架上每个探头的作用和焊缝探伤的区域。针对目前螺旋焊管自动超声波探伤设备执行壳牌标准存在的问题提出了设备改造方案。设备改造后,超声波探伤能力得到了提高,钢管焊缝质量得到了保证。
Abstract:
In order to achieve 100% scanning and coverage of the ultrasonic flaw detection for the large wall thickness spiral submerged arc welded pipe,several standard requirements of the automatic ultrasonic flaw detection for the spiral submerged arc welded pipe are compared,and the differences between the Shell pipe standard DEP 31.40.20.37-Gen and other standards are emphatically analyzed,as well as the requirements for the automatic ultrasonic flaw detection equipment of the spiral submerged arc welded pipe. For the steel pipes with different wall thickness,the function of each probe on the weld detection frame and the area of the weld detection are defined when Shell standards is applied to steel pipe with different wall thickness. In view of some problems existing in the implementation of the Shell standard for the automatic ultrasonic flaw detection equipment of the spiral welded pipe at present,the equipment transformation scheme is put forward. After the equipment transformation,the capacity of the ultrasonic detection has been improved to ensure the weld quality.

参考文献/References:

[1] DEP 31.40.20.37-Gen,壳牌管线钢管规范[S].
[2] API SPEC 5L,石油天然气工业管线输送系统钢管(45版)[S].
[3] GB/T 9711—2017,石油天然气工业管线输送系统用钢管[S].
[4] SY/T 6423.2—2013,石油天然气工业 钢管无损检测方法第2部分 焊接钢管焊缝纵向和/或横向缺欠的自动超声检测[S].
[5] 吕育栋,汪超,曹华勇,等. 壳牌新标准中超声波自动探伤探头的选取及布置[J]. 钢管,2013,42(5):77-82.
[6] 曹雷. 焊管常用探伤方法及技术[J]. 钢管,2012(4):72-74.
[7] 郑辉,林树青. 超声检测(2版)[M]. 北京:中国劳动社会保障出版社,2008.
[8] 王诗鹏,李希明,刘蒙,等. PUAT和AUT检测技术在海管检测中的对比分析[J]. 焊管,2013,36(2):48-52.
[9] 李晓敏,唐彦林. 自动超声波串列探伤在螺旋埋弧焊钢管检测中的应用[J]. 焊管,2013,36(6):48-52.
[10] 孔诚. 曲面焊缝超声波串列式探伤方法探讨[J]. 无损探伤,2004,28(3):19-22.

相似文献/References:

[1]胡德虎,赵 炜,牛 辉,等.螺旋埋弧焊管双丝高速焊工艺参数的优化[J].焊管,2007,30(4):69.[doi:1001-3938(2007)04-0069-03]
 HU De-hu,ZHAO Wei,NIU Hui,et al.Process Parameters Optimization of High Speed Welding with Double Wires for Spiral Submerged Arc Welded Pipe[J].,2007,30(6):69.[doi:1001-3938(2007)04-0069-03]
[2]杨 志 孝.一种简单实用的螺旋埋弧焊管内焊清渣机[J].焊管,2007,30(5):63.[doi:1001-3938(2007)05-0063-03]
 YANG Zhi-xiao.New & Practical Welding Slag Cleaning Unit for Inside Welding of Helical Submerged Arc Welding Pipe[J].,2007,30(6):63.[doi:1001-3938(2007)05-0063-03]
[3]毕宗岳,王海博,王高峰.螺旋埋弧焊管焊缝形貌优化研究[J].焊管,2008,31(2):14.[doi:1001-3938(2008)02-0014-05]
 BI Zong-yue,WANG Hai-bo,WANG Gao-feng.Optimization Research on Weld Profile of Spiral Submerged Arc Welded Pipe[J].,2008,31(6):14.[doi:1001-3938(2008)02-0014-05]
[4]李必文,杨春雨,王树人,等.带钢边缘加工工艺的改进——双铣边替代剪边[J].焊管,2008,31(2):63.[doi:1001-3938(2008)02-0063-04]
 LI Bi-wen,YANG Chun-yu,WANG Shu-ren,et al.Improvement of Machining Process for Strip Edges-replacing Edges Cutting with Double Milling[J].,2008,31(6):63.[doi:1001-3938(2008)02-0063-04]
[5]秦跃平.前摆式螺旋埋弧焊管机组内焊缝裂纹产生原因分析[J].焊管,2008,31(4):62.[doi:1001-3938(2008)04-0062-02]
 QIN Yue-ping.Analysis on Reason of Inside Weld Crack of Front Swing SSAW Pipe Units[J].,2008,31(6):62.[doi:1001-3938(2008)04-0062-02]
[6]林春明,徐泽旋,朱文闯,等.螺旋埋弧焊管焊缝中链状气孔的判定[J].焊管,2008,31(4):69.[doi:1001-3938(2008)04-0069-03]
 LIN Chun-ming,XU Ze-xuan,ZHU Wen-chuang,et al.Verification to Chain Porosity in Weld of SSAW Pipe[J].,2008,31(6):69.[doi:1001-3938(2008)04-0069-03]
[7]李为卫,王亚龙,李 洋,等.小批量试制X80级板卷及焊管的拉伸性能分析[J].焊管,2008,31(5):16.[doi:1001-3938(2008)05-0016-04]
 LI Wei-wei,WANG Ya-long,LI Yang,et al.Analysis on Tensile Properties of Small Batch Trial-produced X80 Grade Steel Coil and Welded Pipe[J].,2008,31(6):16.[doi:1001-3938(2008)05-0016-04]
[8]宗 波,王树人,王铁民,等.国产X80级螺旋埋弧焊管的试制[J].焊管,2008,31(6):39.[doi:1001-3938(2008)06-0039〖KG-*2〗-04]
 ZONG Bo,WANG Shu-ren,WANG Tie-min,et al.Trial Production of X80 Grade Helically Submerged Arc Welded Pipe in China[J].,2008,31(6):39.[doi:1001-3938(2008)06-0039〖KG-*2〗-04]
[9]陈小康,张毅.螺旋埋弧焊管生产过程卷板消耗定额编制方法及应用[J].焊管,2009,32(5):70.[doi:1001-3938(2009)05-0070-03]
 CHEN Xiao-kang,ZHANG Yi.Formulate Steel Coil Consumption Quota Method During SSAW Pipe Production and Its Application[J].,2009,32(6):70.[doi:1001-3938(2009)05-0070-03]
[10]孟德强,宁月,徐辉.螺旋埋弧焊管常见焊接裂纹的分析[J].焊管,2009,32(7):58.[doi:1001-3938(2009)07-0058-04]
 MENG De-qiang,NING Yue,XU Hui.Analysis on Common Welding Crack of SSAW Pipe[J].,2009,32(6):58.[doi:1001-3938(2009)07-0058-04]

备注/Memo

备注/Memo:
收稿日期:2019-06-01
作者简介:马朝辉(1984—),男,工程师,长期从事螺旋埋弧焊管无损检测技术研究工作。
更新日期/Last Update: 2020-07-17