[1]陈丽娟,王慧心,谷 丰,等.高硫高盐油田用825复合钢管焊接国际标准探讨[J].焊管,2020,43(6):64-68.[doi:10.19291/j.cnki.1001-3938.2020.06.012]
 CHEN Lijuan,WANG Huixin,GU Feng,et al.Discussion on International Standards of 825 Alloy Composite Pipe Welding in High-sulfur and High-salt Oil Field[J].,2020,43(6):64-68.[doi:10.19291/j.cnki.1001-3938.2020.06.012]
点击复制

高硫高盐油田用825复合钢管
焊接国际标准探讨
()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
43
期数:
2020年第6期
页码:
64-68
栏目:
标准化
出版日期:
2020-06-28

文章信息/Info

Title:
Discussion on International Standards of 825 Alloy Composite Pipe Welding in High-sulfur and High-salt Oil Field
文章编号:
10.19291/j.cnki.1001-3938.2020.06.012
作者:
陈丽娟王慧心谷 丰刘 畅樊学华
中国石油工程建设有限公司 北京设计分公司,北京 100085
Author(s):
CHEN LijuanWANG HuixinGU FengLIU ChangFAN Xuehua
China Petroleum Engineering & Construction Co.,Ltd.,Beijing Company,Beijing 100085,China
关键词:
焊接高硫高盐825合金复合钢管国际标准
Keywords:
weldinghigh-sulfide and high-salt825 alloycomposite steel pipeinternational standard
分类号:
TG457.19
DOI:
10.19291/j.cnki.1001-3938.2020.06.012
文献标志码:
B
摘要:
基于国内外825合金焊接研究的基础,结合国际标准和国际石油公司的技术规范,明确了825合金的适用范围,探讨了焊接关键参数对825复合钢管焊接接头性能的影响,规定了相关性能试验的检测要求和指标,建立了825复合钢管焊接指南,切实保证了825复合钢管焊接接头的力学性能和抗腐蚀开裂性能,为高硫高盐油田用825复合钢管焊接提供参考和依据。
Abstract:
Based on the research of 825 alloy welding at home and abroad,combined with the international standards and specifications of the international petroleum companies,the application scope of 825 alloy is defined,the influence of key welding parameters on the performance of 825 composite steel pipe welding joint is discussed,the inspection requirements and indexes of the relevant performance tests are specified,the welding guide of 825 composite steel pipe is established,and the welding guide of 825 composite steel pipe is effectively guaranteed. The mechanical properties and anti-corrosion cracking properties of the joint provide reference and basis for 825 composite steel pipe welding in high sulfur and high-salt oil field.

参考文献/References:

[1] AGARWAL D C,ECKHARDT M. Nickel alloys and newer super-austenitic alloys contributions in the CPI and petrochemical industries[J]. Corrosion,2006(233):1-17.
[2] 任保剑,何清,张付峰,等. N08825镍基合金复合管件加工技术及耐蚀性研究[J]. 焊管,2017,40(8):3-35.
[3] 许爱华,院振刚,杨光,等. 双金属复合管的施工焊接技术[J]. 天然气与石油,2010,28(6):22-28.
[4] 孙育禄,白真权,张国超,等. 油气田防腐用双金属复合管研究现状[J]. 全面腐蚀控制,2011,25(5):10-16.
[5] 朱世东,王栋,李广山,等. 油气田用双金属复合管研究现状[J]. 腐蚀科学与防护技术,2011,23(6):529-533.
[6] 曹晓燕,邓娟,上官昌淮,等. 双金属复合管复合工艺研究进展[J]. 钢管,2014,43(2):11-15.
[7] 冯伟,杨占利,魏涛,等. 冶金双金属复合管焊接技术的开发及应用[J]. 焊管,2018,41(5):33-37.
[8] 李发根,孟繁印,郭霖,等. 双金属复合管焊接技术分析[J]. 焊管,2014,37(6):40-43.
[9] API RP 582,Welding Guidelines for the Chemical,Oil,and Gas Industries[S].
[10] M-601,Welding and Inspection of Piping[S].
[11] DEP 61.40.20.36-Gen,Welding of CAR-clad or CRA Lined Materials[S].
[12] GIS 43-334,Welding of Corrosion Resistant Alloy,Internally Clad,and Mechanically Lined Pipelines[S].
[13] SAES-W-019,Girth Welding Requirements for Clad pipelines[S].
[14] DNV-OS-F101,Submarine Pipeline Systems[S].
[15] NACE MR0175/ISO 15156-3,Petroleum and Natural Gas Industries-materials for Use in H2S Containing Environments in Oil and Gas Production[S].
[16] DEP 30.10.02.15-Gen,Materials for Use in H2S Containing Environments in Oil and Gas Production (Amendment and Supplements to ISO 15156:2009)[S].
[17] DEP 39.01.10.12-Gen,Selection of Materials for Life Cycle Performance(EP)—Upstream Equipment[S].
[18] Nickel Development Institute. Corrosion resistant alloys in the oil and gas industry-selection guidelines update[R]. Houston:NIDI Publication(No.10073),2001.
[19] HIBNER E L,PUCKETT B C,JOHN K,et al. Comparison of corrosion resistance of nickle-base alloys for OCTG’s and mechanical tubing in severe sour service conditions[J]. Corrosion,2005(101):1-15.
[20] 羊东明,朱原原,蔡锐,等. 825合金/20钢双金属复合管焊接工艺[J]. 焊接技术,2015,44(11):33-36.
[21] 田磊,刘海璋,杨军,等. N08825/L450QS镍基复合板焊接工艺及组织性能研究[J]. 钢管,2016,45(1):13-17.
[22] 樊学华,于勇,柯特,等. 含H2S 高含盐油气田用SFA-
2205双相不锈钢焊接国际标准概述[J]. 焊接技术,2015,44(2):65-69.
[23] 李建波,张俊生,郭超,等. 双金属复合管焊接方法选用[J]. 石油化工建设,2018(2):80-82.
[24] API SPEC 1104,Welding of Pipelines and Related Facilities[S].
[25] ASME BPVC Ⅸ, Qualification Standard for Welding and Brazing Procedures,Welders,Brazers and Welding and Brazing Operators[S].
[26] 姚彩艳,张林贤. Incoloy Alloy 825铁镍基合金的焊接工艺研究[J]. 焊接技术,2002,31(6):19-20.
[27] 周叶平,张凯峰. 镍基合金625+X65复合管的焊接性和焊接工艺研究[J]. 焊管,2015,38(9):61-68.
[28] ASTM A370,Standard Test Methods and Definitions for Mechanical Testing of Steel Products[S].
[29] NACE MR 0103/ISO 17945,Petroleum,Petrochemical and Natural Gas industries-metallic Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments[S].
[30] ASTM G48,Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric chloride Solution[S].
[31] ASTM G28,Standard Test Methods for Detecting Sus-ceptibility to Intergranular Corrosion in Wrought, Nickel-rich, Chromium-bearing Alloys[S].
[32] ASTM G39,Standard Practice for Preparation and Use of Bent-beam Stress-corrosion Test Specimens[S].
[33] NACE TM 0177,Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments[S].
[34] ASTM E562,Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count[S].
[35] Nickel Development Institute. Guidelines for the welded fabrication of nickel alloys for corrosion-resistant service[R]. Houston:NIDI Publication(No.11012),1994.

相似文献/References:

[1]赵春友.中直径直缝双面埋弧焊钢管[J].焊管,2007,30(5):59.[doi:1001-3938(2007)05-0059-02]
 ZHAO Chun-you.Longitudinal Double Submerged Arc Welded Pipe with Medium Diameter[J].,2007,30(6):59.[doi:1001-3938(2007)05-0059-02]
[2]郭瑞杰,付桂英,杨天冰,等.长输油气管道激光焊接技术[J].焊管,2007,30(6):78.[doi:1001-3938(2007)06-0078-03]
 GUO Rui-jie,FU Gui-ying.Laser Welding Technology of Long Distance Pipeline[J].,2007,30(6):78.[doi:1001-3938(2007)06-0078-03]
[3]毕宗岳,张锦刚.连续管焊丝的试验研究[J].焊管,2008,31(1):26.[doi:1001-3938(2008)01-0026-03]
 BI Zong-yue,ZHANG Jin-gang.Testing & Research of Welding Wire Used for Coil Tubing[J].,2008,31(6):26.[doi:1001-3938(2008)01-0026-03]
[4]韩志诚,王少刚,徐凤林,等.双相不锈钢的焊接研究进展[J].焊管,2008,31(3):5.[doi:1001-3938(2008)03-0005-04]
 HAN Zhi-cheng,WANG Shao-gang,XU Feng-lin,et al.Progress of Research on Welding of Duplex Stainless Steel[J].,2008,31(6):5.[doi:1001-3938(2008)03-0005-04]
[5]张盟军,刘换军,张 璐,等.林肯焊机并联技术的应用[J].焊管,2008,31(3):56.[doi:1001-3938(2008)03-0056-02]
 ZHANG Meng-jun,LIU Huan-jun,ZHANG Lu,et al.Parallel Connection Technology Application of Lincoln Welding Machine[J].,2008,31(6):56.[doi:1001-3938(2008)03-0056-02]
[6]周友龙,方永龙,袁卫东,等.T91/TP347H管接头焊接工艺试验研究[J].焊管,2008,31(4):17.[doi:1001-3938(2008)04-0017-04]
 ZHOU You-long,FANG Yong-long,YUAN Wei-dong,et al.Study on Welding Procedure Test of T91/TP347H Pipe Joint[J].,2008,31(6):17.[doi:1001-3938(2008)04-0017-04]
[7]冯 斌,刘 宇,刘方明.X70级管线钢焊接热裂纹模拟研究[J].焊管,2009,32(1):15.[doi:1001-3938(2009)01-0015-06]
 FENG Bin,LIU Yu,LIU Fang-min.Welding Thermal Crack Simulation Study on X70 Grade Pipeline Steel[J].,2009,32(6):15.[doi:1001-3938(2009)01-0015-06]
[8]徐 刚,王 旭,李树军,等.林肯交流焊机斯考特连接的研究[J].焊管,2009,32(3):52.[doi:1001-3938(2009)03-0052-02]
 XU Gang,WANG Xu,LI Shu-jun,et al.The Research of Lincoln AC Welding Machine Scott Connection[J].,2009,32(6):52.[doi:1001-3938(2009)03-0052-02]
[9]张祥,曾涛.基于ANSYS压力容器筒体与平板封头焊缝残余应力有限元分析[J].焊管,2009,32(5):22.[doi:1001-3938(2009)05-0022-03]
 ZHANG Xiang,ZENG Tao.The Finite Element Analysis on the Weld Residual Stress of the Pressure Vessel Cylinder and Plate Dome Based on ANSYS[J].,2009,32(6):22.[doi:1001-3938(2009)05-0022-03]
[10]尹长华,邹欣,李广民.“东西伯利亚—太平洋”管道工程项目中焊接相关认证介绍[J].焊管,2009,32(6):59.[doi:1001-3938(2009)06-0059-05]
 YIN Chang-hua,ZOU Xin,LI Guang-min.Regarding qualification and certificate Correlated with Welding[J].,2009,32(6):59.[doi:1001-3938(2009)06-0059-05]

备注/Memo

备注/Memo:
收稿日期:2020-02-27
作者简介:陈丽娟(1983—),女,硕士,高级工程师,主要从事油气田地面工程材料选择、腐蚀防护、焊接相关的研究与设计工作。
更新日期/Last Update: 2020-07-17